Electrospun fiber membranes from blends of poly(vinylidene fluoride) with fouling‐resistant zwitterionic copolymers

Nonwoven super‐hydrophobic fiber membranes have potential applications in oil–water separation and membrane distillation, but fouling negatively impacts both applications. Membranes were prepared from blends comprising poly(vinylidene fluoride) (PVDF) and random zwitterionic copolymers of poly(methyl methacrylate) (PMMA) with sulfobetaine methacrylate (SBMA) or with sulfobetaine‐2‐vinylpyridine (SB2VP). PVDF imparts mechanical strength to the membrane, while the copolymers enhance fouling resistance. Blend composition was varied by controlling the PVDF‐to‐copolymer ratio. Nonwoven fiber membranes were obtained by electrospinning solutions of PVDF and the copolymers in a mixed solvent of N,N‐dimethylacetamide and acetone. The PVDF crystal phases and crystallinities of the blends were studied using wide‐angle X‐ray diffraction and differential scanning calorimetry (DSC). PVDF crystallized preferentially into its polar β‐phase, though its degree of crystallinity was reduced with increased addition of the random copolymers. Thermogravimetry (TG) showed that the degradation temperatures varied systematically with blend composition. PVDF blends with either copolymer showed significant increase of fouling resistance. Membranes prepared from blends containing 10% P(MMA‐ran‐SB2VP) had the highest fouling resistance, with a fivefold decrease in protein adsorption on the surface, compared to homopolymer PVDF. They also exhibited higher pure water flux, and better oil removal in oil–water separation experiments. © 2018 Society of Chemical Industry     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

Studying high impact fix-inducing changes

As software systems continue to play an important role in our daily lives, their quality is of paramount importance. Therefore, a plethora of prior research has focused on predicting components of software that are defect-prone. One aspect of this research focuses on predicting software changes that are fix-inducing. Although the prior research on fix-inducing changes has many advantages in terms of highly accurate results, it has one main drawback: It gives the same level of impact to all fix-inducing changes. We argue that treating all fix-inducing changes the same is not ideal, since a small typo in a change is easier to address by a developer than a thread synchronization issue. Therefore, in this paper, we study high impact fix-inducing changes (HIFCs). Since the impact of a change can be measured in different ways, we first propose a measure of impact of the fix-inducing changes, which takes into account the implementation work that needs to be done by developers in later (fixing) changes. Our measure of impact for a fix-inducing change uses the amount of churn, the number of files and the number of subsystems modified by developers during an associated fix of the fix-inducing change. We perform our study using six large open source projects to build specialized models that identify HIFCs, determine the best indicators of HIFCs and examine the benefits of prioritizing HIFCs. Using change factors, we are able to predict 56 % to 77 % of HIFCs with an average false alarm (misclassification) rate of 16 %. We find that the lines of code added, the number of developers who worked on a change, and the number of prior modifications on the files modified during a change are the best indicators of HIFCs. Lastly, we observe that a specialized model for HIFCs can provide inspection effort savings of 4 % over the state-of-the-art models. We believe our results would help practitioners prioritize their efforts towards the most impactful fix-inducing changes and save inspection effort.     

Computer-based testing: An alternative for the assessment of Turkish undergraduate students

Virtually errorless high speed data processing feature has made computers popular assessment tools in education. An important concern in developing countries considering integrating computers as an educational assessment tool before making substantial investment is the effects of computer-based testing on students’ test scores as compared to paper-and-pencil tests. This study investigated whether test scores of Turkish students were different in the computer-based test and in the paper-and-pencil test, with forty-seven undergraduate students studying at a public university located in the Blacksea region of Turkey. Findings of this study showed that test scores of undergraduate students were not different in the computer-based test and in the paper-and-pencil test which led us to reach the conclusion that computer-based testing can be considered as a promising alternative technique for the undergraduate students in Turkey.     

Nigella sativa oil entrapped polycaprolactone nanoparticles for leishmaniasis treatment

This study is the first to investigate the antileishmanial activities of Nigella sativa oil (NSO) entrapped poly‐ɛ ‐caprolactone (PCL) nanoparticles on Leishmania infantum promastigotes and amastigotes in vitro. NSO molecules with variable initial doses of 50, 100, 150, and 200 mg were successfully encapsulated into PCL nanoparticles identified as formulations NSO1, NSO2, NSO3, and NSO4, respectively. This process was characterised by scanning electron microscope, dynamic light scattering, Fourier transform infrared, encapsulation efficiency measurements, and release profile evaluations. The resulting synthetised nanoparticles had sizes ranging between 200 and 390 nm. PCL nanoparticles encapsulated 98% to 80% of initial doses of NSO and after incubation released approximately 85% of entrapped oil molecules after 288 h. All investigated formulations demonstrated strong antileishmanial effects on L. infantum promastigotes by inhibiting up to 90% of parasites after 192 h. The tested formulations decreased infection indexes of macrophages in a range between 2.4‐ and 4.1‐fold in contrast to control, thus indicating the strong anti‐amastigote activities of NSO encapsulated PCL nanoparticles. Furthermore, NSO‐loaded PCL nanoparticles showed immunomodulatory effects by increasing produced nitric oxide amounts within macrophages by 2–3.5‐fold in contrast to use of free oil. The obtained data showed significant antileishmanial effects of NSO encapsulated PCL nanoparticles on L. infantum promastigotes and amastigotes.Inspec keywords: antibacterial activity, drug delivery systems, nanofabrication, nitrogen compounds, nanomedicine, microorganisms, cellular biophysics, diseases, scanning electron microscopy, oils, polymers, biomedical materials, nanoparticles, encapsulation, Fourier transform infrared spectraOther keywords: encapsulation efficiency measurements, entrapped oil molecules, investigated formulations, NSO‐loaded PCL nanoparticles, Nigella sativa oil entrapped polycaprolactone nanoparticles, antileishmanial activities, poly‐ε‐caprolactone nanoparticles, scanning electron microscope, DLS, Fourier transform infrared, release profile evaluations, Leishmania infantum promastigotes, Leishmania infantum amastigotes, parasites, infection, infection indexes, macrophages, immunomodulatory effects, time 288.0 hour, time 192.0 hour, mass 50.0 mg, mass 100.0 mg, mass 150.0 mg, mass 200.0 mg, size 200.0 nm to 390.0 nm