Joint scheduling and power control supporting multicasting in wireless ad hoc networks

This paper addresses the problem of power control in a multihop wireless network supporting multicast traffic. We face the problem of forwarding packet traffic to multicast group members while meeting constraints on the signal-to-interference-plus-noise ratio (SINR) at the intended receivers. First, we present a distributed algorithm which, given the set of multicast senders and their corresponding receivers, provides an optimal solution when it exists, which minimizes the total transmit power. When no optimal solution can be found for the given set of multicast senders and receivers, we introduce a distributed, joint scheduling and power control algorithm which eliminates the weak connections and tries to maximize the number of successful multicast transmissions. The algorithm allows the other senders to solve the power control problem and minimize the total transmit power. We show that our distributed algorithm converges to the optimal solution when it exists, and performs close to centralized, heuristic algorithms that have been proposed to address the joint scheduling and power control problem.     

Gyrotron coaxial cylindrical resonators with corrugated innerconductor: Theory and experiment

Gyrotron coaxial resonators with a longitudinally slotted inner cylinder are examined analytically using a surface impedance model, from which expressions for the electromagnetic field, ohmic quality (Q) factor, and characteristic equation of the transverse eigenvalues χ _m,p are obtained. The major attributes of such resonators are expressed by the dependence of χ_m,p on the parameter C-defined as the ratio of the outer to inner radii of the coaxial structure. In that connection, the effect of the corrugation parameters on χ_m,p is particularly investigated on the basis of an expression derived for the slope function dχ_m,p,p/dC. It is shown that the χ_m,p(C) curve may either exhibit oscillatory behavior or present a flat portion over a wide range of C depending on the corrugation parameters chosen. The theory is checked against experiment in which resonant frequencies and total Q factors were measured for TE modes operating in the range of 8-16 GHz in a coaxial cavity with 40 slots. Good agreement is found in that the magnitude of the relative error in frequency is less than 0.5%. Corrugated coaxial resonators prove to be relevant to megawatt gyrotrons where highly selective cavities are required to ensure high conversion efficiency     

Cold tests of open coaxial resonators in the range 9–17 GHz

A study of selective properties of coaxial open cylindrical resonators have been conducted experimentally and compared with theory. The resonator consists of an inner circular cylinder symmetrically located inside an outer weakly irregular open waveguide. Several fundamental TE modes were identified over the range 9 to 17 GHz through measurements of the resonant frequencies and the associated loaded quality factors. It has been verified that the structure and the number of resonant modes are both strongly dependent on the diameter of the coaxial insert. Such an electrodynamical system proves to be useful in guided wave applications requiring, for example, filters, frequency-tunable resonators and devices for analyzing the modal composition of a signal.     

Insiders Behaving Badly

This column goes beyond previous insider analyses to identify a framework for a taxonomy of insider threats including both malicious and inadvertent actions by insiders that put organizations or their resources at some risk. The framework includes factors reflecting the organization, the individual, the information technology system, and the environment.     

A study of behavioural groupings of polyphenolic species in "fino" sherry wine. Evolution during vinification and mechanical treatment of the grape

The different groups and/or classes among phenolic acids and aldehydes identified during the elaboration process of "fino" sherry wine have been studied. The study was carried out using different processes during the elaboration of the wine and we have attempted to establish whether the different treatments of the grape affect these groupings. The study was undertaken by means of cluster and multifactorial analysis on the data obtained by the quantitative determination of phenolic acids and aldehydes during vinification and in experiments carried out on the grape under different mechanical treatments. The analysis of phenolic acids and aldehydes was done with HPLC, using a C-18 mu-Bondapak and a stepwise composite gradient. The samples were previously extracted with ethylic ether.     

Alarm pheromone system of leaf-footed bugLeptoglossus zonatus (Heteroptera: Coreidae)

The alarm pheromone system ofLeptoglossus zonatus (Dallas) adults was shown to be composed of hexyl acetate, hexanol, hexanal, and hexanoic acid. Single components tested in the field elicited dispersive behavior of over 70% of adults. 2-(E)-Hexenal, found in the secretion of nymphs, but not in the exudates of adults, was also active against adults. In addition, first-instar nymphs responded to the four components of the alarm pheromone of adults as well as to 2-(E)-hexenal, a component of their own alarm pheromone system. Adults and nymphs possess different alarm pheromone systems, which are not specific to their own life stage. That hemipteran alarm pheromone systems are not species-specific was supported by the fact that both adult and nymphL. zonatus responded to butanoic acid, an alarm pheromone of Alydidae, which was not found in this Coreidae species.     

Towards a smooth design process for static communicative node‐link diagrams

Node‐link infographics are visually very rich and can communicate messages effectively, but can be very difficult to create, often involving a painstaking and artisanal process. In this paper we present an investigation of node‐link visualizations for communication and how to better support their creation. We begin by breaking down these images into their basic elements and analyzing how they are created. We then present a set of techniques aimed at improving the creation workflow by bringing more flexibility and power to users, letting them manipulate all aspects of a node‐link diagram (layout, visual attributes, etc.) while taking into account the context in which it will appear. These techniques were implemented in a proof‐of‐concept prototype called GraphCoiffure, which was designed as an intermediary step between graph drawing/editing software and image authoring applications. We describe how GraphCoiffure improves the workflow and illustrate its benefits through practical examples.     

Toward the Interactive 3D Modelling Applied to Ponte Rotto in Rome

We present the first step of a research aimed at automating a driven interactive 3D modeling of an existing architectural object. The method is based on oriented multi-image spherical panoramas produced by stitching techniques. The photogrammetric process has two steps: the creation of a semi-automatic process to find homolog points in two panoramas; the creation of parametric definitions for an interactive modeling creating points, segments, and surfaces based on the plotted points in the first step. By connecting these two steps, the creation of the model will be automatic, as we indicate the necessary points in just one panoramic photo. The principals of multi-view geometry and epipolar geometry were applied to simplify the calculation in the first step in order to create an automatic identification of the correspondent points in the other panorama. The epipolar geometry is described by both analytical and graphical programming, implementing in the first case a C++ application and in the second case a Rhinoceros and Grasshopper application. A case study of the Ponte Rotto in Rome (Italy) is presented.     

Minimum Setup Minimum Aberration Two‐level Split‐plot Type Designs for Physical Prototype Testing

Although new technologies allow for less effort in prototyping, physical testing still remains an important step in the product development cycle. Well‐planned experiments are useful to guide the decision‐making process. During the design of an experiment, one of the challenges is to balance limited resources and system constraints to obtain useful information. It is common that prototypes are composed of several parts, with some parts more difficult to assemble than others. And, usually, there is only one piece available of each part type and a large number of different setups. Under these conditions, designs with randomization restrictions become attractive approaches. Considering this scenario, a new and additional criterion, minimum setup, to construct split‐plot type designs is presented. Designs with the minimum number of setups of the more difficult parts, which are especially useful for screening purposes in physical prototype testing, are discussed. The use of the proposed criterion combined with minimum aberration for selecting a regular design is shown through a real application in testing car prototypes. As a tool to practitioners, catalogs of selected 32‐run minimum setup minimum aberration split‐split‐plot and split‐split‐split‐plot designs are presented. More complete catalogs are available as Supporting information. Copyright © 2015 John Wiley & Sons, Ltd.     

Formalizing process-based risk with Value-Focused Process Engineering

Following calls to advance the integration of risk and business process modeling paradigms, this paper formalizes the process of incorporating risk into business process models through the principles of Value-Focused Process Engineering (VFPE). In doing so, the paper aims to extend the existing VFPE modeling notation to reflect a set of necessary constructs required to adequately represent risk in goal-oriented business-process models. The extended set of constructs is proposed to support a formal systems view of process-based risk. Process-based risk is formalized on the one hand, as a product of complex interactions between activity-based elements, and on the other hand, as a natural component of the value creation mechanism of an elementary function or a complex process. The proposed risk-aware VFPE formalism also formulates rules for decomposing risk in process models according to the organizational values, thereby enabling better risk visibility, reducing process complexity, and ensuring continuity of business processes.