An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Improvement options for a former water-driven-mill building now used as a theatre

After investigating the financial feasibility (and so abandoning the idea) of providing self-generated electricity using hydro-power, it was recommended that the top priority should be the direct connection of an electricity supply, from the mains grid to the building; this would cost £8800. Thereby, the theatre would receive a relatively unrestricted supply of electricity at cheaper unit tariffs. This improvement should be followed by the most urgent repairs being carried out to the building fabric, at an estimated cost of £6990. These repairs are necessary to ensure the continued integrity of the building's structure, thereby inhibiting the on-going deterioration.

The energy and financial appraisal also suggested a priority listing of overall improvements to the building in order to achieve a significant, economically justifiable reduction in energy demand; the recommended options are estimated to cost in total £39819. However, the capital cost of such an upgrading would only be recouped, and the theatre achieve a sustainable future, if the building were to be used more intensively and for a wider range of activities than at present in order to increase its revenue significantly.

All prices as stated are those at August 1991.     

Microprocessor IDDQ testing: a case study

The author describe their incorporation of I_DDQ testing into the design of the PA-7100LC PA-RISC microprocessor. They also discuss design guidelines, measurement techniques, results after fabrication and volume production, and suggested improvement. Their 900,000-transistor custom design supports I_DDQ testing to ensure high quality without compromising 100-MHz-plus performance     

Detoxification of cereal plant allelochemicals by aphids: Activity and molecular weights of glutathioneS-transferase in three species of cereal aphids

The activity and molecular weights of glutathioneS-transferase were studied in three species of cereal aphid:Metopolophium dirhodum, Sitobion avenae, andRhopalosiphum padi. The highest level of glutathioneS-transferase activity was recorded in extracts fromM. dirhodum and the lowest fromS. avenae, and extracts of larvae were more active than those from adults. The activity of this enzyme was higher in extracts ofS. avenae andR. padi previously fed on a moderately resistant wheat variety than on a susceptible variety. Gel filtration followed by SDS-PAGE revealed three protein bands in the active fractions. The first had a molecular weight of 28,500 and the second of 27,500 and were present in all three species of aphid. The third protein differed in the three species, having a molecular weight of 26,000 inS. avenae, 25,500 inM. dirhodum, and 24,000 inR. padi.     

Robust tracking control of an array of nanoparticles moving on a substrate

Control of nanosystems with frictional dynamics using feedback control methods is important to a wide range of applications of nanotribology. This paper studies the tracking control problem of an array of nanoparticles moving on a substrate with friction between the substrate and the particles. The focus of this study is on control design and stability analysis. The major challenges in this problem include nonlinearities and uncertainties in the frictional dynamics and limited availability of measurable states in nanosystems. The particle–substrate interaction is considered to be unknown, and the unknown effect of unmodeled particle dynamics on the dynamics of the center of mass of the array is also considered. A nonlinear identifier is first developed to identify these unmodeled dynamics. A feedback controller is then developed based on the identifier to control the center of mass of the particles to track a desired trajectory. Boundedness of the closed-loop states and semiglobal asymptotic stability of the tracking error are proven using Lyapunov theory for the case of linear inter-particle interactions. An example with more general Morse-type inter-particle interactions is included to provide some level of confidence that the results are general but not assuredness that they are. Numerical simulation results are provided to demonstrate the performance of the developed identification and control law.     

Radio Spectrum Management for Tetherless Communications

For any new radio technology, spectrum management is an essential part of the development process, to identify the best frequency band for operation of the system. This has to take account of the many other users and applications of the radio spectrum, so that systems neither cause, nor receive, harmful interference from other radio systems. It is a process that is sometimes considered to be unnecessarily restrictive and slow; however, that is because it is often a difficult balancing act between the technical, commercial and political pressures on the (finite) radio spectrum. This paper describes the underlying principles and processes of radio spectrum management, explaining the relationships between the organisations which are responsible for spectrum management at the national, regional and international levels. It also describes the current work on the identification of frequency bands for the new tetherless communications technologies, and in particular the 2.4 and 5 GHz bands. This revised version was published online in July 2006 with corrections to the Cover Date.     

Immunological characterisation of barley polypeptides in lager foam

Eight monoclonal antibodies (mAb) recognising barley polypeptides have been identified from a library developed to wheat prolamins. The specificity or the mAb has been determined using enzyme-linked immunosorbent assay (ELISA) and immunoblotting. Six were of broad specificity, recognising D, B, C and γ-hordeins to varying degrees by both techniques. IFRN 0610 preferentially recognised γ-hordeins by ELISA but was highly specific for this hordein group by immunoblotting. Another mAb, IFRN 0624, bound to a M_r ∽ 18000 polypeptide belonging to the CM protein (trypsin/α-amylase inhibitor) family by immunoblotting. This, or a related protein, was detected by 0624 in all hordein fractions using ELISA. These mAb, together with two others described previously and found to recognise the repeat motif of C hordein, were used in ELISA and immunoblot analysis of Octyl-Sepharose fractions of lager foam. Hordein polypeptides were found in all foam fractions, indicating that much foam protein originates from the malt. The CM-like protein was found present in a virtually unmodified form. In contrast, the repeat motif of C hordein was not detected, indicating that it had either been destroyed or masked by other beer constituents. The foam stabilising agent, propylene glycol alginate (PGA), increased the apparent hydrophobicity of hordein fragments suggesting that at least part of the activity of PGA is mediated by interactions with the hordein components of foam.