Use of the Retarded Solution-Reprecipitation Process to Attain a Higher Initial Permeability in MnZn Ferrites

We investigated the effect of various amounts of liquid phase on microstructure development during sintering and the resulting magnetic permeability of MnZn ferrite (MZF) samples. Our results revealed that the microstructure and the final magnetic permeability depend on the thickness of the liquid-phase film during sintering. The solution-reprecipitation (S-R) process, which is associated with an intensive microstructure development in MZF, starts when a continuous liquid-phase film of critical thickness δ_o, which wets the MZF grains, is formed. The solid-state sintering that takes place before the formation of the continuous liquid-phase film is essential for the final microstructure of MZF.     

Evidence of flexoelectricity in polymer-dispersed liquid crystals

The linear electro-optic response of polymer-dispersed liquid crystal films has been studied. Micrometer-sized droplets of a cyanobiphenyl mixture (E7) were formed in a Norland Optical Adhesive 65 photopolymer by photopolymerization-induced phase separation. Samples with various average nematic droplet sizes were systematically investigated. The temperature dependence of the first-harmonic electro-optic spectra was obtained. Peculiar peaks and double peaks in the phase spectra were found at temperatures close to the clearing point. Samples with narrow distributions of droplet sizes were characterized by a double peak of the amplitude spectra in the low-frequency range. A flexoelectric origin of the first-harmonic spectra in confined nematic systems is discussed.     

Interface between electroless amorphous Ni–Cu–P coatings and Al substrate

The initial phase arising at the interface with aluminum substrate during electroless deposition of amorphous high phosphorus (16–19 at.%) Ni–Cu–P alloy with alloyed copper 1.7–3.4 at.% is studied. Stripped deposit foils are inspected by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy coupled with energy dispersive X-ray analysis (TEM-EDX). Depending on the plating conditions, various particles, some of them crystalline, are revealed at the foils sides formerly adhering to the substrate. EDX analysis of the crystallites shows diverse copper contents of about 34–64 at.%, without any phosphorus. Electron diffraction analysis indicates a lattice structure very close to that of Cu. The presence of a phase without phosphorus and enriched in copper at the interface with the Al substrate is also confirmed by Auger electron spectroscopy. This initially arising crystalline phase might exert a limited effect on the main properties of bulk Ni–Cu–P deposits: the composition uniformity through the thickness, amorphous structure and paramagnetic behavior. A modification of the plating process is recommended, which is decreasing the probability of inhomogeneities formation.     

A quantitative analysis of the unit verification perspective on fault distributions in complex software systems: an operational replication

Unit verification, including software inspections and unit tests, is usually the first code verification phase in the software development process. However, principles of unit verification are weakly explored, mostly due to the lack of data, since unit verification data are rarely systematically collected and only a few studies have been published with such data from industry. Therefore, we explore the theory of fault distributions, originating in the quantitative analysis by Fenton and Ohlsson, in the weakly explored context of unit verification in large-scale software development. We conduct a quantitative case study on a sequence of four development projects on consecutive releases of the same complex software product line system for telecommunication exchanges. We replicate the operationalization from earlier studies, analyzed hypotheses related to the Pareto principle of fault distribution, persistence of faults, effects of module size, and quality in terms of fault densities, however, now from the perspective of unit verification. The patterns in unit verification results resemble those of later verification phases, e.g., regarding the Pareto principle, and may thus be used for prediction and planning purposes. Using unit verification results as predictors may improve the quality and efficiency of software verification.     

The structure of glasses in the TeO2-P2O5 system

The co-effects of two glass-formers in the TeO₂-P₂O₅ system are studied on the basis of neutron diffraction data. The curves for the radial distribution function (RDF) obtained show a high extent of destruction of the short-range order in the tellurite matrix, while the basic co-ordination PO₄ polyhedron remains unchanged. The co-ordination number (cn) of the Te atom changes from 4 to 3+1 and marked tendency towards elongation of the Te-O distances over 2.3 Å is observed. The considerably higher stability of the PO₄ polyhedra and their strong influence on the TeO₄ polyhedra is established. The observed smearing effect of the Te-Te, Te-second O and O-second O distances in the range of 3.8 to 3.9 Å in other tellurite glasses is also characteristic of this system. A structural interpretation of the liquid-liquid immiscibility on the short-range order level in the system is given. A critical composition with 26±5% of the second glass-former is established, above which concentration a stable immiscibility in the tellurite systems is observed. An attempt is made to construct two adequate structural models (microhomogeneous and microheterogeneous) for the short-range order in the glasses studied.     

Simple and efficient ion imprinted polymer for recovery of uranium from environmental samples

Ion imprinted polymer material (IIP) was prepared by forming ternary complexes of uranyl imprint ion with 1-(prop-2-en-1-yl)-4-(pyridin-2-ylmethyl)piperazine and methacrylic acid followed by thermal copolymerization with ethylene glycol dimethacrylate as the cross-linking monomer in the presence of 1,1'-azobis(cyclohexanecarbonitrile) initiator and 2-methoxy ethanol porogenic solvent. HCl solution (5 mol/L) was used to leach out the uranyl template ion from the IIP particles. Similarly, the control polymer (CP) material was also prepared exactly under the same conditions as the IIP but without the uranyl ion template. Various parameters such as solution pH, initial concentration, aqueous phase volume, sorbent dosage, contact time and leaching solution volumes were investigated. SEM, IR and BET-surface area and pore size analysis were used for the characterization of IIP and CP materials. The extraction efficiency of the IIP and CP was compared using a batch and SPE mode of extraction. The optimal pH for quantitative removal is 4.0-8.0, sorbent amount is 20 mg, contact time is 20 min and the retention capacity is 120 mg of uranyl ion per g of IIP. The IIP prepared demonstrated superior selectivity towards coexisting cations and therefore it can be used for selective removal of uranium from complex matrices.     

A novel split-and-merge algorithm for hierarchical clustering of Gaussian mixture models

The paper presents a novel split-and-merge algorithm for hierarchical clustering of Gaussian mixture models, which tends to improve on the local optimal solution determined by the initial constellation. It is initialized by local optimal parameters obtained by using a baseline approach similar to k-means, and it tends to approach more closely to the global optimum of the target clustering function, by iteratively splitting and merging the clusters of Gaussian components obtained as the output of the baseline algorithm. The algorithm is further improved by introducing model selection in order to obtain the best possible trade-off between recognition accuracy and computational load in a Gaussian selection task applied within an actual recognition system. The proposed method is tested both on artificial data and in the framework of Gaussian selection performed within a real continuous speech recognition system, and in both cases an improvement over the baseline method has been observed.     

Regulation of S100As Expression by Inflammatory Cytokines in Chronic Lymphocytic Leukemia

The calcium-binding proteins S100A4, S100A8, and S100A9 are upregulated in chronic lymphocytic leukemia (CLL), while the S100A9 promotes NF-κB activity during disease progression. The S100-protein family has been involved in several malignancies as mediators of inflammation and proliferation. The hypothesis of our study is that S100A proteins are mediators in signaling pathways associated with inflammation-induced proliferation, such as NF-κB, PI3K/AKT, and JAK/STAT. The mononuclear cells (MNCs) of CLL were treated with proinflammatory IL-6, anti-inflammatory IL-10 cytokines, inhibitors of JAK1/2, NF-κB, and PI3K signaling pathways, to evaluate S100A4, S100A8, S100A9, and S100A12 expression as well as NF-κB activation by qRT-PCR, immunocytochemistry, and immunoblotting. The quantity of S100A4, S100A8, and S100A9 positive cells (p < 0.05) and their protein expression (p < 0.01) were significantly decreased in MNCs of CLL patients compared to healthy controls. The S100A levels were generally increased in CD19⁺ cells compared to MNCs of CLL. The S100A4 gene expression was significantly stimulated (p < 0.05) by the inhibition of the PI3K/AKT signaling pathway in MNCs. IL-6 stimulated S100A4 and S100A8 protein expression, prevented by the NF-κB and JAK1/2 inhibitors. In contrast, IL-10 reduced S100A8, S100A9, and S100A12 protein expressions in MNCs of CLL. Moreover, IL-10 inhibited activation of NF-κB signaling (4-fold, p < 0.05). In conclusion, inflammation stimulated the S100A protein expression mediated via the proliferation-related signaling and balanced by the cytokines in CLL.     

Reorganization of the Brain Extracellular Matrix in Hippocampal Sclerosis

The extracellular matrix (ECM) is an important regulator of excitability and synaptic plasticity, especially in its highly condensed form, the perineuronal nets (PNN). In patients with drug-resistant mesial temporal lobe epilepsy (MTLE), hippocampal sclerosis type 1 (HS1) is the most common histopathological finding. This study aimed to evaluate the ECM profile of HS1 in surgically treated drug-resistant patients with MTLE in correlation to clinical findings. Hippocampal sections were immunohistochemically stained for aggrecan, neurocan, versican, chondroitin-sulfate (CS56), fibronectin, Wisteria floribunda agglutinin (WFA), a nuclear neuronal marker (NeuN), parvalbumin (PV), and glial-fibrillary-acidic-protein (GFAP). In HS1, besides the reduced number of neurons and astrogliosis, we found a significantly changed expression pattern of versican, neurocan, aggrecan, WFA-specific glycosylation, and a reduced number of PNNs. Patients with a lower number of epileptic episodes had a less intense diffuse WFA staining in Cornu Ammonis (CA) fields. Our findings suggest that PNN reduction, changed ECM protein, and glycosylation expression pattern in HS1 might be involved in the pathogenesis and persistence of drug-resistant MTLE by contributing to the increase of CA pyramidal neurons’ excitability. This research corroborates the validity of ECM molecules and their modulators as a potential target for the development of new therapeutic approaches to drug-resistant epilepsy.     

An inverse problem for estimation of bending stiffness in Kirchhoff–Love plates

This work deals with the development of a numerical method for solving an inverse problem for bending stiffness estimation in a Kirchhoff–Love plate from overdetermined data. The coefficient is identified using a technique called the Method of Variational Imbedding, where the original inverse problem is replaced by a minimization problem. The Euler–Lagrange equations for minimization comprise higher-order equations for the solution of the displacement and an equation for the bending stiffness. The correctness of the embedded problem is discussed. A difference scheme and a numerical algorithm for solving the parameter identification problem are developed. Numerical results for the obtained values of the bending stiffness as an inverse problem are presented.