Experimental Investigation of the Recovery of Soaked Paper Using Evaporative Freeze Drying

The aim of this article is to develop an experiment and a procedure to investigate the restoration of water-damaged paper and archival materials using freeze drying in order to allow a reproducible test and comparison of the influence of different operating conditions on drying time and restored paper quality. Firstly, a reproducible method for the preparation of soaked samples simulating water-damaged paper has been developed. Then, the samples have been freeze-dried in a laboratory-scale apparatus that allowed monitoring the temperature as well as the weight of the samples. The technique of evaporative freezing, which reduces the drying time required, has been used in this case. An innovative procedure for the visualization of the progress of the drying process has been validated, thus allowing the validation of a simple phenomenological model of the time evolution of the ice core volume; in addition, data on the residual moisture of the dried paper sheets in different zones have been given. Finally, optimization of this particular drying process by using simple or more sophisticated approaches has been discussed.     

Herding stochastic autonomous agents via local control rules and online target selection strategies

Autonomous Robots - We propose a simple yet effective set of local control rules to make a small group of “herder agents” collect and contain in a desired region a large ensemble of...     

The MORPHEUS Heterogeneous Dynamically Reconfigurable Platform

Reconfigurable computing offers a wide range of low cost and efficient solutions for embedded systems. The proper choice of the reconfigurable device, the granularity of its processing elements and its memory architecture highly depend on the type of application and their data flow. Existing solutions either offer fine grain FPGAs, which rely on a hardware synthesis flow and offer the maximum degree of flexibility, or coarser grain solutions, which are usually more suitable for a particular type of data flow and applications. In this paper, we present the MORPHEUS architecture, a versatile reconfigurable heterogeneous System-on-Chip targeting streaming applications. The presented architecture exploits different reconfigurable technologies at several computation granularities that efficiently address the different applications needs. In order to efficiently exploit the presented architecture, we implemented a complete software solution to map C applications to the reconfigurable architecture. In this paper, we describe the complete toolset and provide concrete use cases of the architecture.     

Modeling Lung Carcinoids with Zebrafish Tumor Xenograft

Lung carcinoids are neuroendocrine tumors that comprise well-differentiated typical (TCs) and atypical carcinoids (ACs). Preclinical models are indispensable for cancer drug screening since current therapies for advanced carcinoids are not curative. We aimed to develop a novel in vivo model of lung carcinoids based on the xenograft of lung TC (NCI-H835, UMC-11, and NCI-H727) and AC (NCI-H720) cell lines and patient-derived cell cultures in Tg(fli1a:EGFP)^y1 zebrafish embryos. We exploited this platform to test the anti-tumor activity of sulfatinib. The tumorigenic potential of TC and AC implanted cells was evaluated by the quantification of tumor-induced angiogenesis and tumor cell migration as early as 24 h post-injection (hpi). The characterization of tumor-induced angiogenesis was performed in vivo and in real time, coupling the tumor xenograft with selective plane illumination microscopy on implanted zebrafish embryos. TC-implanted cells displayed a higher pro-angiogenic potential compared to AC cells, which inversely showed a relevant migratory behavior within 48 hpi. Sulfatinib inhibited tumor-induced angiogenesis, without affecting tumor cell spread in both TC and AC implanted embryos. In conclusion, zebrafish embryos implanted with TC and AC cells faithfully recapitulate the tumor behavior of human lung carcinoids and appear to be a promising platform for drug screening.     

The Potentiality of Plant-Derived Nanovesicles in Human Health—A Comparison with Human Exosomes and Artificial Nanoparticles

Research in science and medicine is witnessing a massive increases in literature concerning extracellular vesicles (EVs). From a morphological point of view, EVs include extracellular vesicles of a micro and nano sizes. However, this simplistic classification does not consider both the source of EVs, including the cells and the species from which Evs are obtained, and the microenvironmental condition during EV production. These two factors are of crucial importance for the potential use of Evs as therapeutic agents. In fact, the choice of the most suitable Evs for drug delivery remains an open debate, inasmuch as the use of Evs of human origin may have at least two major problems: (i) autologous Evs from a patient may deliver dangerous molecules; and (ii) the production of EVs is also limited to cell factory conditions for large-scale industrial use. Recent literature, while limited to only a few papers, when compared to the papers on the use of human EVs, suggests that plant-derived nanovesicles (PDNV) may represent a valuable tool for extensive use in health care.     

Edge degree-of-sharpness and free-stream turbulence scale effects on the aerodynamics of a bridge deck

This paper discusses the sensitivity of the aerodynamic behavior of a trapezoidal-shaped bridge deck cross-section to its lower corner degree-of-sharpness and to the incoming flow turbulence integral length scale in conjunction with low turbulence intensity. Since these features are hard to set and measure in experimental facilities, the aerodynamic behavior of the body has been investigated through the computational simulation of the flow around it. The results are given in term of force coefficients, Strouhal number, pressure distribution along its surface, and the mean and instantaneous flow patterns. Dramatic changes in the force coefficients and Strouhal number occur following small changes in the parameter values. These changes have been found to be due to significant modifications in the topological structure of the flow. Special emphasis has been given to the analysis of the separation and reattachment points, the recirculation bubble length, the vortex shedding mechanisms and the wake structures. On the basis of the results, four aerodynamic regimes have been pointed out in analogy with the well-known individual Re number regimes. Some of these regimes have also been recognized on the deck section with the considered sharpest and smoothest lower edge treatments, i.e. for the highest and lowest degrees-of-sharpness.     

Photovoltaic Devices: High‐Performance Organic Solar Cells with Spray Coated Hole‐Transport and Active Layers (Adv. Funct. Mater. 1/2011)

In this study, we report high performance organic solar cells with spray coated hole‐transport and active layers. With optimized ink formulations we are able to deposit films with controlled thickness and very low surface roughness (<10 nm). Specifically we deposit smooth and uniform 40 nm thick films of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as well as films composed of a mixture of poly(3‐hexyl thiophene) (P3HT) and the C₆₀‐derivative (6,6)‐phenyl C61‐butyric acid methyl ester (PCBM) with thicknesses in the range 200–250 nm. To control film morphology, formation and thickness, the optimized inks incorporate two solvent systems in order to take advantage of surface tension gradients to create Marangoni flows that enhance the coverage of the substrate and reduce the roughness of the film. Notably, we achieve fill factors above 70% and attribute the improvement to an enhanced P3HT crystallization, which upon optimized post‐drying thermal annealing results in a favorable morphology. As a result, we could extend the thickness of the layer to several hundreds of nanometers without noticing a substantial decrease of the transport properties of the layer. By proper understanding of the spreading and drying dynamics of the inks we achieve spray coated devices with power conversion efficiency of 3.75%, with fill factor, short circuit current and open circuit voltage of 70%, 9.8 mA cm^?2 and 550 mV, respectively.     

Nanoimprinted,Submicrometric, MOF‐Based 2D Photonic Structures: Toward Easy Selective Vapors Sensing by a Smartphone Camera

In this work, a soft‐lithographic approach to fabricate submicrometer metal organic framework (MOF)‐based 2D photonic structures is described. Nanometric zeolitic imidazole framework material ZIF‐8 (zinc) is chosen as the sensible MOF material because of its chemical stability and its vapor selective adsorption properties. Two different systems are fabricated: nanopatterned colloidal ZIF‐8 homo‐ and ZIF‐8/TiO₂ heterostructures. Several features (stripes, squares, etc.) with dimensions of 200 nm are replicated on different substrates such as silicon, flexible plastics, and even aluminum cans, over relatively large surfaces (up to 1 cm²). In addition, the use of these photonic MOF‐heterostructures as very low‐cost sensing platforms compatible with smartphone technology is demonstrated. This method relies on the evaluation of the change in diffraction efficiency of the photonic MOF‐patterns, induced by the MOF refractive index variation, which is simply detected by a charge coupled device (CCD) camera, as those integrated in smartphones, without need for complex optical instrumentations for transduction data processing. Performances of the sensors are first evaluated using isopropyl alcohol adsorption/desorption cycling as a model case. In addition, a “real” environmental issue is tackled. Selective detection of styrene in presence of interfering water is demonstrated at concentrations below the human permissible exposure limit. In situ ellispometric analyses are also carried out in order to confirm the sensor performances and to propose a mechanism for styrene uptake into the nanoMOFs.     

Game theory and time utility functions for a radio aware scheduling algorithm for WiMAX networks

In WiMAX systems the Base Station scheduler plays a key role as it controls the sharing of the radio resources among the users. The goal of the scheduler is multiple: achieve fair usage of the resources, satisfy the QoS requirements of the users, maximize goodput, and minimize power consumption, and at the same time ensuring feasible algorithm complexity and system scalability. Since most of these goals are contrasting, scheduler designers usually focus their attention on optimizing one aspect only. In this scenario, we propose a scheduling algorithm (called GTS_Nmathrm{GTS_N}) whose goal is to contemporaneously achieve efficiency and fairness, while also taking into account the QoS requirements and the channel state. GTS_Nmathrm{GTS_N} exploits the properties of Time Utility Functions (TUFs) and Game Theory. Simulations prove that the performance of GTS_N,mathrm{GTS_N}, when compared to that of several well-known schedulers, is remarkable. GTS_Nmathrm{GTS_N} provides the best compromise between the two contrasting objectives of fairness and efficiency, while QoS requirements are in most cases guaranteed. However, the exponential complexity introduced by the game theory technique makes it rather impractical and not computationally scalable for a large number of users. Thus we developed a suboptimal version, named sub-GTS_N.mathrm{GTS_N}. We show that this version retains most of the features and performance figures of its brother, but its complexity is linear with the number of users.