Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

A high-speed gateable image pipeline

We present the performance of a high-speed gateable vacuum image pipeline, which permits individual images to be delayed and selected from continuous non-repetitive image stream. This device is composed of a vacuum tube equipped with a photocathode at one end, a phosphor screen at the other end, and a system of metal grids in between. Photoelectrons produced by the images focused on the photocathode, are guided by a uniform magnetic field, parallel to the tube axis. By changing the grid potentials, the drift time of the photoelectrons inside the tube can be varied from 0.35 to 1.5 μs. An image can then be selected by an external trigger with a time resolution in the range of 4–30 ns, depending on the delay time. The selected photoelectrons are finally accelerated onto the phosphor screen, set at 10 kV, where they reproduce the desired image. With a magnetic field of 0.1 T, a spatial resolution of 33 lp/mm was obtained. The high spatial and time resolution make this device an interesting tool for high-energy physics and astrophysics experiments, and for high-speed photography.     

Prevalence of adrenal carcinoma among incidentally discovered adrenal masses. A retrospective study from 1989 to 1994. Gruppo Piemontese Incidentalomi Surrenalici

BACKGROUND: The incidental discovery of an adrenal mass poses the problem of distinguishing between the frequent benign masses and the infrequent malignant ones that require surgery. Univocal guidelines to approach this problem are unavailable. OBJECTIVE: To perform a survey of the clinical management of incidentally discovered adrenal masses (ie, adrenal incidentalomas). DESIGN: A multicentric retrospective analysis of hospital medical records of adrenal incidentalomas diagnosed during a 5-year period; the medical records were scrutinized for demographic data and clinical details by means of a specifically tailored questionnaire. SETTING: The major surgical and medical centers of Piedmont, a northern Italian region with approximately 4 million inhabitants. The recruitment pattern of these centers was unselected. PATIENTS: The definition of adrenal incidentaloma was limited to patients with a physical examination and a clinical history unindicative of adrenal disease. Exclusion criteria also included hypertension of suspected endocrine origin and a history of neoplasms known to metastasize frequently in the adrenal glands. Two hundred twenty-four medical records were collected, and 210 were analyzed (14 excluded a posteriori). RESULTS: Most patients were in their 50s and 60s, and women were predominantly affected. The frequency of adrenocortical cancer was 13% among patients operated on. The tumor diameter was highly correlated with the risk of cancer; a cutoff at 5 cm had a sensitivity of 93% with a specificity of 64% in discriminating between benign and malignant cortical lesions. CONCLUSIONS: The occurrence of adrenocortical carcinoma among adrenal incidentalomas is not rare. The evaluation of the mass size is a simple and effective method for selecting patients at risk for cancer. The indication for surgery of masses larger than 5 cm, or of masses of any diameter that have suspicious imaging characteristics, limits unnecessary operations and costs.     

Cobalt doped glass for the fabrication of percolated glass–alumina functionally graded materials

The present research was focused on the development of a new glass to produce glass–alumina FGMs. The glass formulation, belonging to the CaO–ZrO₂–SiO₂ system, was doped with cobalt, by adding a small molar percentage (about 0.1 mol%) of CoO, in order to obtain a blue glass, which could be useful to appreciate the final compositional gradient. The glass was accurately characterized, evaluating its thermal behaviour, its mechanical properties, and its attitude to crystallize during a thermal treatment. Subsequently, the glass was used to produce glass–alumina FGMs via percolation and the so obtained specimens were analysed in order to evaluate the effect of the glass infiltration. The possible development of new crystal phases, in particular, was tested via micro X-ray diffraction and the elastic properties gradient associated with the compositional gradient was measured via depth-sensing Vickers microindentation.     

Experimental Investigation of the Recovery of Soaked Paper Using Evaporative Freeze Drying

The aim of this article is to develop an experiment and a procedure to investigate the restoration of water-damaged paper and archival materials using freeze drying in order to allow a reproducible test and comparison of the influence of different operating conditions on drying time and restored paper quality. Firstly, a reproducible method for the preparation of soaked samples simulating water-damaged paper has been developed. Then, the samples have been freeze-dried in a laboratory-scale apparatus that allowed monitoring the temperature as well as the weight of the samples. The technique of evaporative freezing, which reduces the drying time required, has been used in this case. An innovative procedure for the visualization of the progress of the drying process has been validated, thus allowing the validation of a simple phenomenological model of the time evolution of the ice core volume; in addition, data on the residual moisture of the dried paper sheets in different zones have been given. Finally, optimization of this particular drying process by using simple or more sophisticated approaches has been discussed.     

BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.     

Stress corrosion cracking of cold-worked austenitic stainless steels

Stress corrosion cracking (SCC) of AISI 304L and AISI 316L stainless steels, cold-worked under various conditions (i.e. at different degrees of deformation obtained by drawing and rolling at room temperature and at liquid nitrogen temperature) has been carried out in H₂O containing 1000 ppm Cl^? at 250°C and in a boiling MgCl₂ solution. The effect of heat treatments at 400 and 900°C on the SCC of previously cold-worked steels has also been studied. Particular attention was directed towards heat treatment at 400°C. In steels deformed at room temperature, it increases the SCC resistance. By contrast, for steels deformed at liquid nitrogen temperature, heat treatment at 400°C reduces the SCC resistance if carried out for short periods of time (1–6 h). Hardness measurements, structural analyses via X-rays, scanning and transmission electron microscopy (SEM and TEM), as well as modified Strauss tests, seem to prove that reduced stress corrosion resistance is not to be related to the chromium-rich carbides precipitation which could have been accelerated by the presence of α′-martensite. Instead, they tend to suggest that perhaps this phenomenon is connected to an increase in the level of internal micro-stresses which are generated by a reciprocal re-ordering of the α′ and γ structural phases.     

Statics Aware Grid Shells

We introduce a framework for the generation of polygonal gridshell architectural structures, whose topology is designed in order to excel in static performances. We start from the analysis of stress on the input surface and we use the resulting tensor field to induce an anisotropic nonEuclidean metric over it. This metric is derived by studying the relation between the stress tensor over a continuous shell and the optimal shape of polygons in a corresponding gridshell. Polygonal meshes with uniform density and isotropic cells under this metric exhibit variable density and anisotropy in Euclidean space, thus achieving a better distribution of the strain energy over their elements. Meshes are further optimized taking into account symmetry and regularity of cells to improve aesthetics. We experiment with quad meshes and hexdominant meshes, demonstrating that our gridshells achieve better static performances than stateoftheart gridshells.