Modeling energy and agriculture interactions—I: A rural energy systems model

Since many of the factors related to rural energy systems are gradually being quantified, there is a need to construct a model that integrates a number of these factors simultaneously in a consistent framework. Therefore, a general linear programming model is developed to capture energy and agricultural interactions existing in the rural areas of developing countries. Energy used for agriculture includes fertilizers, irrigation, and mechanization. Several technological choices of each of the above are considered and so are several crop commodities, several types of livestock, and farmers of different income groups along with their assets, i.e. land holdings, livestock, etc. The by-products of agriculture, i.e. biomass, such as crop residues, animal dung, wood, etc., can be used to generate energy. On the demand side the use of them for feed, fuel, and fertilizer must be considered. Thus, the household sector (which is the largest user of noncommercial energy), as well as the rural industries sector, is intimately related to the agriculture sector. Twelve different energy sources and several conversion technologies, such as biogas, charcoal kilns, alcohol distilleries, etc., are considered. The model is applicable to low-income, biomass-scarce developing countries. However, different types of countries will require different approximations, and their needs for detailing some aspects or other may vary. The model is suitable for policy purposes because it considers several income groups separately and considers how different changes affect each of them.     

在双镶嵌铜互联中O.13微米器件生成用的基于PVD和ALD阻挡层的先进技术

1. Introduction The requirement of minimal bottom coverageand thick sidewall coverage for PVD-based films forlow via resistance and improved stress migration isnot easy to achieve with traditional depositionmethods. Modern I-PVD techniques give high bot-tom coverage, due to the ionized component of thedeposition flux. Sidewall coverage tends to be low,which is mainly due to off-normal deposition fluxand a less than unity sticking coefficient.     

The use of the modified escalator algorithm to improve theperformance of transform-domain LMS adaptive filters

This paper describes a new algorithm that improves the convergence performance of the transform-domain least mean-square (TRLMS) algorithm. The algorithm exploits the sparse structure of the correlation matrix of the transformed input process to derive a data dependent Gram-Schmidt orthogonalization type transform of the process. We show its faster convergence compared with the time-domain least mean-square (LMS) algorithm and the DCT or the DWT-based TRLMS algorithm. The Gram-Schmidt orthogonalization is realized using a modified adaptive escalator algorithm. The modification significantly reduces the computational complexity of the adaptive escalator algorithm and determines the computational complexity of the proposed algorithm     

Magnetoluminescence properties of Hg1−xCdxTe epitaxial layers and superlattice structures grown by metalorganic molecular beam epitaxy

We present a study of the electro-optical properties ofHg _1- xCd_xTe epitaxial layers and Hg_1-x Cd_xTe/CdTe (0.28 < x < 0.30) superlattice structures by x-ray diffraction, lateral transport and photo- and magneto-luminescence measurements. Systematic studies of the excitation intensity and magnetic field dependence of the photoluminescence revealed direct evidence of an excitonic contribution to the observed luminescence in Hg_{1- x}Cd_xTe epitaxial layers. Similar investigations of the superlattice structures indicated that excitonic corrections were required to adequately fit the luminescence data. Optical gains of 80 cm⁻¹ were obtained for an excitation intensity of 100 kW/cm² indicating suitable electro-optical properties for making efficient mid-infrared laser diodes.     

Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation

This paper deals with the design of a multi-slot hole-coupled microstrip antenna on a substrate of 2 mm thickness that gives multi-frequency (wideband) characteristics. The Method of Moments (MoM)-based IE3D software was used to simulate the results for return loss, VSWR, the Smith chart, and the radiation patterns. A tunnel-based artificial neural network (ANN) was also developed to calculate the radiation patterns of the antenna. The radiation patterns were measured experimentally at 10.5 GHz and 12 GHz. The experimental results were in good agreement with the simulated results from IE3D and those of the artificial neural network. A new method of using a genetic algorithm (GA) in an artificial neural network is also discussed. This new method was used to calculate the resonant frequency of a single-shorting-post microstrip antenna. The resonant frequency calculated using the genetic-algorithm-coupled artificial neural network was compared with the analytical and experimental results. The results obtained were in very good agreement with the experimental results.     

Instruction Scheduling for Low Power

Reducing energy consumption has become an important issue in designing hardware and software systems in recent years. Although low power hardware components are critical for reducing energy consumption, the switching activity, which is the main source of dynamic power dissipation in electronic systems, is largely determined by the software running on these systems.In this paper, we present and evaluate several instruction scheduling algorithms that reorder a given sequence of instructions taking into account the energy considerations. We first compare a performance-oriented scheduling technique with three energy-oriented instruction scheduling algorithms from both performance (execution cycles of the resulting schedules) and energy consumption points of view. Then, we propose three scheduling algorithms that consider energy and performance at the same time. Our experimentation with these scheduling techniques shows that the best scheduling from the performance perspective is not necessarily the best scheduling from the energy perspective. Further, scheduling techniques that consider both energy and performance simultaneously are found to be desirable, that is, these techniques are quite successful in reducing energy consumption and their performance (in terms of execution cycles) is comparable to that of a pure performance-oriented scheduling. We also illuminate the inherent approximations and difficulties in building energy models for enabling energy-aware instruction scheduling and explore alternative options using cycle-accurate energy simulator. The simulation results show that the energy-oriented scheduling reduces energy consumption by up to 30% compared to the performance-oriented scheduling.     

Broadcast storm mitigation techniques in vehicular ad hoc networks

Several multihop applications developed for vehicular ad hoc networks use broadcast as a means to either discover nearby neighbors or propagate useful traffic information to other vehicles located within a certain geographical area. However, the conventional broadcast mechanism may lead to the so-called broadcast storm problem, a scenario in which there is a high level of contention and collisions at the link layer due to an excessive number of broadcast packets. While this is a well-known problem in mobile ad hoc wireless networks, only a few studies have addressed this issue in the VANET context, where mobile hosts move along the roads in a certain limited set of directions as opposed to randomly moving in arbitrary directions within a bounded area. Unlike other existing works, we quantify the impact of broadcast storms in VANETs in terms of message delay and packet loss rate in addition to conventional metrics such as message reachability and overhead. Given that VANET applications are currently confined to using the DSRC protocol at the data link layer, we propose three probabilistic and timer-based broadcast suppression techniques: weighted p-persistence, slotted 1-persistence, and slotted p-persistence schemes, to be used at the network layer. Our simulation results show that the proposed schemes can significantly reduce contention at the MAC layer by achieving up to 70 percent reduction in packet loss rate while keeping end-to-end delay at acceptable levels for most VANET applications.     

AlGaN/GaN HEMTs-an overview of device operation and applications

Wide bandgap semiconductors are extremely attractive for the gamut of power electronics applications from power conditioning to microwave transmitters for communications and radar. Of the various materials and device technologies, the AlGaN/GaN high-electron mobility transistor seems the most promising. This paper attempts to present the status of the technology and the market with a view of highlighting both the progress and the remaining problems.     

Sleepy keeper style based Low Power VLSI Architecture of a Viterbi Decoder applying for the Wireless LAN Operation sustainability

Analog Integrated Circuits and Signal Processing - Remarkable progress in the field of wireless communication has created a research interest for Viterbi decoder with long duration of battery life,...     

Time-independent,high electron mobility in thin PC61BM films: Relevance to organic photovoltaics

Ultrafast optical probing of electric field by means of electroabsorption combined with conventional photocurrent measurements was employed to investigate the drift and mobility dynamics of photo-generated charge carriers in the pristine PC₆₁BM film and in the blend with a merocyanine dye. Electrons passed a 40 nm thick PC₆₁BM film within a few picoseconds with time-independent and weakly dispersive mobility. The electron mobility is 1 cm²/(V s) at 1 MV/cm and an estimate of the zero-field mobility yields 5 ⋅ 10⁻² cm²/(V s). The initial electron mobility in the blend is of the order of 10⁻² cm²/(V s) and decreases rapidly. We conclude that electron motion in PC₆₁BM based organic bulk hetero-junction solar cells is limited by barriers between PC₆₁BM domains rather than by intrinsic PC₆₁BM properties.