Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of functional gradient copolymers of glycidyl methacrylate and butyl acrylate

Epoxy-functional spontaneous gradient copolymers of glycidyl methacrylate (G) and n-butyl acrylate (B) were synthesized via atom transfer radical polymerization (ATRP). The copolymerization reactions were carried out in toluene solution at 70 °C, using methyl 2-bromopropionate (MBrP) as initiator and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst system. The kinetic behaviour of the statistical copolymerizations was studied in a wide composition interval with molar fractions of G ranging from 0.10 to 0.75. The synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR was employed to determine the copolymer composition, demonstrating the gradient character of the copolymers along the main chain in the whole monomer conversion interval. Apart from this, the sequence distribution and stereoregularity were analyzed. These microstructural experimental data agreed well with those calculated from Mayo-Lewis terminal model (MLTM) and a Bernoullian statistic with an isotacticity parameter of σ_G = 0.28 and a coisotacticity parameter of σ = 0.30.     

Nanocrystalline TiO2 photosensitized with natural polymers with enhanced efficiency from 400 to 600 nm

TiO₂ sensitization for solar applications requires not only efficient but also stable and inexpensive sensitizers. Different condensed tannins extracted from bark wastes of tropical wood trees were studied as possible sensitizers of TiO₂. These natural polymers adhere strongly to the TiO₂ even from aqueous solutions. Absorption spectra are presented for 1 mM aqueous sensitizing solutions prepared with lyophilized condensed tannins which absorb light in the visible range. Spectral photocurrent measurements and I–V characterization show that no bias is required for electron injection to the TiO₂ from all studied condensed tannins. Incident photon to current efficiency (IPCE) analysis indicates that surface complexation originates absorption bands with different electron injection efficiencies. These play a dominant role in determining IPCE spectral shape. We propose that surface modification by the sensitizer changes the surface trap density, thereby decreasing recombination losses.     

Composing RESTful Services and Collaborative Workflows: A Lightweight Approach

The use of RESTful Web services has gained momentum in the development of distributed applications based on traditional Web standards such as HTTP. In particular, these services can integrate easily into various applications, such as mashups. Composing RESTful services into Web-scale workflows requires a lightweight composition language that's capable of describing both the control and data flow that constitute a workflow. The authors address these issues with Bite, a lightweight and extensible composition language that enables the creation of Web-scale workflows and uses RESTful services as its main composable entities.     

Study of the nozzle flow in a cross-flow turbine

An investigation of the flow inside the nozzle of a Cross-Flow turbine, which is a hydraulic turbine where the rectangular water jet issuing from the nozzle crosses the rotor blades twice, is presented here. Part of the investigation consisted in the experimental measurement of the static pressure distribution on the inside walls of two different nozzle configurations, both with the nozzle mounted alone and in the presence of a rotor. The tests performed in the presence of a rotor included the measurement of efficiency and covered a wide range of working conditions around the best efficiency point. The analysis of the results obtained in this way give us an indication of the influence of the turbine non-dimensional volume flow rate on the flow inside the nozzle and the way it affects the reaction degree of the machine and its efficiency level. Although most of the tests were carried out with a 25-blade rotor, one of the analysed nozzle configurations (that with an inside vane) was also tested with a 10-blade rotor, permitting the assessment of the effect the number of blades has on the flow in the nozzle.The flow inside the nozzle with no inside vane was numerically analysed using a method based on a Schwarz-Christoffel conformal transformation of variables. The numerical results show a fair agreement with the experimental data collected when the rotor was not present. A qualitative discussion of some of the losses occurring in the nozzle is advanced based on the computer results, and its conclusions are used for explaining the poor performance of the nozzle with no inside vane.     

Thrombotic thrombocytopenic purpura and hemolytic uremic syndrome (TTP/HUS). Description of a series of 35 patients

Subsequent to the implementation of a severity marker stamp in case notes, an audit was performed in 86 admissions with acute asthma to a specialist centre over a 12 month period. Compared to previous audit the documentation of severity markers was significantly better (PEFR: 52% vs 83% p = 0.001, Respiratory rate: 44% vs 81% p = 0.001, ABG: 72% vs 80% p = 0.04, air entry: 58% vs 86% p = 0.001, speech: 27% vs 86% p = 0.001, exhaustion: 4% vs 86% p = 0.001). In contrast to the previous audit where no patient received FiO2 > 0.35, 66% of the cases in the repeat audit received FiO2 0.60 (p = 0.001). The mean duration of admission was five days and showed highest partial correlation (r = 0.6) to the time in hours for the pulse to fall to 80/min. Multiple linear regression showed that this was the only variable best predicting the duration of admission (R2 = 0.3). Admission pulse rate (p = 0.04) and serum K+ (p = 0.04) best discriminated between patients admitted for over and under five days. Logistic regression identified only the admission pulse as significant in calculating the odds of the patient staying in the hospital for > 5 days.     

Electric field effects on roto-vibrational transitions of13CD3OH1

We used a Stark-Optoacoustic cell and hybrid waveguide resonators to perform an Infrared and Far Infrared Stark Spectroscopy study on some transitions of¹³CD₃OH. Different behaviours of the transitions in the presence of a d.c. electric field were observed. The Stark splittings of six FIR laser lines ranging from 34 to 136 MHz/kVcm^?1 were determined. The analysis of the behaviour of the IR and FIR transitions in the presence of the external electric fields gives important and exclusive information on the levels involved in the transitions.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.