Model study of the crosslinking of polydimethylsiloxanes by peroxides

The decompositions of di-t-butyl peroxide (TBP) and diaroyl peroxides in permethylated silicone oil (47V20) have been studied by differential scanning calorimetry (DSC). Results show the importance of the solubility of the peroxide in the silicone on their rate of disappearance. For the diaroyl peroxides, according to the nature of the substituents on the phenyl ring and the concentration of the peroxide, the decomposition occurs in solution and/or in the solid phase. Decomposition in solution began at a lower temperature than in the solid phase, which took place immediately after melting and was quite instantaneous. Decomposition of these peroxides was also performed in octamethylcyclotetrasiloxane (D₄) and decamethyltetrasiloxane (DMTS). According to DSC results, D₄ seems to be a better model of the silicone than the linear one. Analyses of the products of the decomposition of TBP and dibenzoyl peroxide (BP) in this model showed that the dehydrodimer of D₄ was produced in low yield relative to peroxide. The main compounds obtained were high molecular weight compounds, which were apparently different for the two peroxides. The free radical origin of these products has been proven in the case of TBP by the addition of TEMPO in the reaction medium.     

In-Situ and Real-Time Investigation of Columnar-to-Equiaxed Transition in Metallic Alloy

In this article, we present a review of observations during Al-3.5 wt pct Ni alloy solidi.cation experiments performed at the European Synchrotron Radiation Facility (ESRF) in Grenoble. These experiments provide direct access to dynamical phenomena during columnar growth (initial transient and breakdown of a planar solid-liquid interface), and for the first time to the transition from columnar-to-equiaxed microstructure (nucleation ahead of a columnar front and blocking of a columnar front by an equiaxed microstructure) and fully equiaxed growth (propagation of an effective front). Based on these experimental observations, critical parameters such as columnar growth velocity variation during the transition or equiaxed-grain diameter are measured and discussed. This article is based on a presentation made in the symposium entitled “Solidi.cation Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.     

Pressure effects on flow and fracture of Be-Al alloys

The flow and fracture behavior of Be-Al alloys were determined in tension with different levels of superimposed pressure. The Be-Al alloys were prepared by Brush Wellman, Inc. (Cleveland, OH) from prealloyed powders processed to either a hot isostatically pressed (“hipped”) or cold isostatically pressed and extruded condition. Significant effects of pressure on both the flow and ductility have been observed at room temperature, with implications on the formability of these materials. The effects of changes in processing conditions and stress state on the flow and fracture behavior are summarized in addition to both optical and scanning electron microscopy (SEM) examination of the fracture surfaces. Separate other studies on the alloy constituents (e.g., Al and Be) are also reported. The results are also compared to previous works on monolithic materials and composites tested with high pressure.     

Oil yield and compressibility modeling during microscale expression: Criteria for linseed breeding

Seven linseed varieties were harvested at seven times before complete maturity. Microscale oilseed expressions were subsequently carried out on it. A pressure of 10 MPa was applied for 1 h under uniaxial stress. The results were characterized in terms of oil, water and mucilage content, harvest date and oil yield. The piston displacement versus time (creep curves) was described by a four‐Kelvin‐Voigt elements viscoelastic model. Parameters were derived from the model, such as the mechanical properties of seeds (compressibility moduli), showing that the viscoelastic model fits well the experimental data (R² ≈ 0.999). The modeling parameters were combined with some biochemical data in order to predict the kinetics of oil extraction.     

An intelligent visualisation and decision support system for decentralised wastewater treatment plants.

Current sanitation concepts of decentralised wastewater treatment and reuse raise the issue of monitoring and maintenance of such systems. To guarantee high quality of the recycled water, systems with high requirements concerning process technology are essential. With increasing numbers of decentralised treatment systems spread over far distances it will become more and more impossible and uneconomic to have expert personnel on site. Therefore, new visualisation and intelligent information systems are necessary. The paper describes the structure and 3D-demonstrations as a base for information visualisation. Up-to-date visualisation techniques, facilitating the cognition of context-adapted information, make it possible to maximise the amount of information presented to the user without overwhelming her or him. Concerning diagnosis and decision support systems in the domain of wastewater treatment, several interesting approaches are presented, estimating their applicability for decentralised wastewater treatment systems. The intelligent decision support system presented here consists of a combined ontology- and case-based reasoning system in addition to a process monitoring system. It is responsible for plausibility checks, error diagnosis, solution proposals, and optimisation suggestions.     

Agent-oriented techniques for network supervision

This paper presents the results of the Réseau futé (smart net) project, the goal of which is to use distributed AI and multi-agent techniques for network management and supervision. More precisely, these techniques have been applied to the partial automation of the dynamic processing (what is known about a network is always incomplete and can change at any time) of alarms and of various event notifications received by network management platforms. The system that we propose is able for example to automatically handle some alarms or to filter events of no-interest for a given operator. To achieve this goal, an assistant, or interface agent according to the model proposed by Patti Maes [MK93], has been realized. The goal of the assistant is first to learn, by observation, the behavior of the network supervision operator and second to reproduce such a behavior when the conditions in which the behavior has been learned are detected again. The learned information are stored using chronicles [Gha94]. A chronicle is a data-structure allowing programmers to represent sequences of events while taking temporal knowledge into account. Our assistant has been implemented and tested within Magenta which is a program, written in Smalltalk, that simulates (in a simplified way) a network management platform. This program respects roughly the gdmo and cmis standards.     

Josephson junction with an amorphous silicon barrier

A Josephson junction Nb/Si/Nb with a 10 nm thick amorphous silicon barrier is studied. The upper electrode contains a 2 nm thick sublayer of amorphous phase adjacent to the barrier, as revealed by cross-sectional TEM. Thus, the junction can be considered as a S-I-N-S system with the N layer represented by amorphous niobium. Peculiarities in the I–V and Δ(T) dependencies are observed and explained as a consequence of a proximity effect present in the upper electrode.     

Oxidative dimerisation of propene to 1,5-hexadiene on Bi-Zn-O catalysts

The oxidative dimerisation of propene to 1,5-hexadiene has been investigated on Bi-Zn-O catalysts. The Bi₄₈ZnO₇₃ phase, observed in the catalysts calcined at 700 ° C is an active and selective catalyst for the formation of 1,5-hexadiene. The best catalytic performance (1,5-hexadiene selectivity 64%) has been obtained at 525 ° C, with a propene to oxygen ratio of 26, on a catalyst formed by Bi₄₈ZnO₇₃ with a small excess of ZnO.     

Polylactide films formed by immersion precipitation: Effects of additives,nonsolvent, and temperature

The influence of nonsolvent, crystallinity of the polymer film, and addition of dodecane (a poor solvent for the polymer and for the nonsolvent) on the morphology of polylactides films has been investigated and was related to phase separation behavior. Both amorphous poly‐DL ‐lactide (PDLLA) and crystalline poly‐L ‐lactide (PLLA) were dissolved in dichloromethane, and subsequently films were made by immersion in nonsolvent baths. PDLLA gave dense films without any internal structure, since the structure was not solidified by crystallization or glassification. PLLA films show varying structure depending on the nonsolvent. With methanol, asymmetric morphologies were observed as a result from combined liquid‐liquid demixing and crystallization, while with water symmetric spherulitic structures were formed. As a next step, dodecane was added, which is not miscible with the nonsolvent, and we found it to have a strong influence on the morphology of the films. The PDLLA films with dodecane did not collapse: a closed cell structure was obtained. In PLLA films, dodecane speeds up phase separation and induces faster crystallization in the films, and the porosity, size of the pores, and interconnectivity increased. When the PLLA solutions were subjected to a heat pretreatment, crystallization could be postponed, which yielded a cellular structure around dodecane, which did not contain spherulites anymore. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 959–971, 2007