Effects of Sr2+ substitution on the crystal structure,Raman spectra,bond valence and microwave dielectric properties of Ba3-xSrx(VO4)2 solid solutions

The effects of Sr²⁺ substitution for Ba²⁺ on microwave dielectric properties and crystal structure of Ba_3-xSr_x(VO₄)₂ (0 ≤ x ≤ 3, BSVO) solid solution were investigated. Such Sr²⁺ substitution contributes to significant reduction in sintering temperature from 1400 °C to 1150 °C. Both permittivity (∑_r) and quality factor (Q × f) values decreased with increasing x value, which was determined to be related with the descending values of average polarizability and packing fraction, whereas the increase in τ_f value was explained by the decreased average VO bond length, A-site bond valence. BSVO ceramics possessed encouraging dielectric performances with ∑_r = 12.2–15.6 ± 0.1, Q × f = 44,340 - 62,000 ± 800 GHz, and τ_f = 24.5–64.5 ± 0.2 ppm/°C. Low-temperature sintering was manipulated by adding B₂O₃ as sintering additive for the representative Sr₃V₂O₈ (SVO) ceramic and only 1 wt.% B₂O₃ addition successfully contributed to a 21.7% decrease in sintering temperature to 900 °C, showing good chemical compatibility with silver electrodes, which render BSVO series and SVO ceramics potential candidates in multilayer electronic devices fabrication.     

档案工作与创新思维

面对新世纪和知识经济新世代的到来，提出如何在档案工作中搞好创新思维。     

基于SLP的生产车间物流优化设计

分析了某公司机加工车间物流现状。运用设施规划和物流分析中的SLP原理,对生产车间的设备布局及周转器具进行重新规划和设计,使车间做到物流顺畅、运输路线最短、缩短生产周期和降低生产成本。     

What can be taught in architectural design? — <Emphasis Type="Italic">parti,poché</Emphasis>, and felt qualities

This essay begins with a reflection on what has been taught in architectural design since the turn of the twentieth century. I shall trace back to the two disciplinary foundations of the French École des Beaux-Arts — parti and poché — in the education of an architect in the eighteenth and nineteenth centuries. I shall then attempt to superimpose parti and poché on a modern disciplinary framework, say that of mathematics, which leads to musings on a series of architectural problems that include pattern versus type, stability versus mobility, orthogonal versus oblique, confinement versus transparency, and aging versus metallic sheen. These paradoxes, I suggest, demand the education of an architect to address both the instrumental pattern of a building configuration and the ambient felt qualities of a room, rather than vision alone.     

Spatial competition and regulatory change in the grain handling and transportation system in western Canada

The grain handling and transportation system (GHTS) has been a defining component of the western Canadian economy since the early part of the last century. Only two major railways serve the grain handling industry, so the potential for the exercise of market power in transportation appears to be significant. In fact, spatially oriented regulations applicable to railways exist in Canada to mitigate this, but to date they have not often been used by shippers. While the reasons for this are not completely clear, we suggest that the regulations are now inadequate for the current state of the GHTS. Using a unique data set from the year 2000, we assess the effect on the grain handling industry of modifications to these regulations, and find that significant gains for shippers from these modifications are possible. These gains are computed to be on the order of C$10–15 million per year for grain shippers alone. We would like to thank conference and presentation participants (Transportation Research Board, Canadian Agricultural Economics Society, University of British Columbia, University of Leeds and California State University, Long Beach) as well as the anonymous reviewers who commented on the earlier versions of this paper. We would also like to acknowledge support from the Saskatchewan Department of Highways.     

岭南民居的自然通风

在简要介绍广东地区气候特点及自然通风原理的基础上,详细探讨了广东民居的自然通风设计手法,包括规划布局、天井及楼井、冷巷及廊道、门窗及室内隔断等几个方面,最后列举一些实例作进一步说明。     

Probabilistic loss assessment of light-frame wood construction subjected to combined seismic and snow loads

In some areas, e.g., mountainous areas in the western United States, both seismic and snow loads are significant. Limited research has been conducted to investigate the seismic risk of light-frame wood construction in those areas considering the combined loads, particularly the snow accumulation. An object-oriented framework of the risk assessment for light-frame wood construction subjected to combined seismic and snow hazards is proposed in this paper. A typical one-story light-frame wood residential building is selected to demonstrate the proposed framework. Economic losses of the building due to the combined hazards are evaluated using the proposed framework. It is found that in areas with significant snow accumulation, the snow load has significant effects on the seismic risk assessment for light-frame wood construction.     

Decomposing regional productivity growth using an aggregate production frontier

The main contribution of this paper is the implementation of a new model which combines the two parametric approaches most commonly used in the productivity literature: fixed effects and stochastic frontiers. This allows us to discuss whether it is better to use average or frontier functions to estimate regional productivity. The empirical section uses panel data of Spanish regions over the period 1980–1995. Additionally, we calculate and decompose total factor productivity growth for the Spanish regions.     

CorelDraw地图符号的设计制作与应用

较详细地介绍了CorelDraw软件平台地图符号的设计方法、制作技巧和应用经验。