FTIR estimation of free fatty acid content in crude oils extracted from damaged soybeans

A user-interactive computer-assisted Fourier transform infrared (FTIR) method has been developed for estimation of free fatty acids (FFA) in vegetable oil samples by deconvolution of the infrared (IR) absorbances corresponding to the triglyceride ester and FFA carbonyl bonds. Peak areas were used to determine FFA as a percentage of the total carbonyl areas in weighed standards of refined, bleached, deodorized soybean oil containing from 0 to 5% added oleic acid. These data for percent FFA by FTIR were compared to corresponding FFA data obtained by two titration methods-the AOCS Official Method Ca 5a-40 and the Official Method with a slight modification. Correlation coefficients were 0.999 for the Ca 5a-40, 0.999 for the modified and 0.989 for the FTIR methods. FFA in samples of crude soybean oils extracted from damaged beans (0.5 to 2.1% FFA) were measured by FTIR and compared to data obtained by titration of the same samples (correlation coefficient, 0.869). To whom correspondence should be addressed at National Center for Agricultural Utilization Research, Agriculture Research Service, U.S. Department of Agriculture, 1815 North University Street, Peoria, IL 61604. ¹The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

Lipid products formed during desaturation of [1-14C] stearyl CoA by hen liver microsomes

A number of lipid products are formed during the desaturation of stearyl CoA by hen liver microsomes. This article presents an analysis of the products formed when [1-¹⁴C] stearyl CoA is incubated with hen liver microsomes for various time periods. [1-¹⁴C] Oleyl CoA was the first radioactive unsaturated product formed. Synthesis of phospholipids containing [1-¹⁴C] oleic acid occurs only after the desaturase activity has begun to decline. The specific radioactivity of [1-¹⁴C] oleyl CoA was similar to the specific radioactivity of [1-¹⁴C] stearyl CoA at all time periods tested. The specific radioactivities of [1-¹⁴C] oleic acid and phospholipids containing [1-¹⁴C] oleic acid were much lower than that of the [1-¹⁴C] stearyl CoA.     

The differential capacitance of solid tantalum in some aqueous solutions

The differential capacitance of tantalum has been measured in a number of aqueous electrolyte solutions. The metal is generally covered with an oxide layer in solutions of simple inorganic anions and the electrode capacitance is 5–10 F cm^–2. In solutions of oxalate anions the electrode capacitance is much higher and corresponds to that expected for a clean metal in contact with an aqueous solution.     

A model for predicting the power delay profile characteristicsinside a room

Multipath effects in indoor wireless communication systems exhibit a characteristic power delay profile (PDP) and can be a detriment to the system's performance. We present a simplified model for calculating the decay rate of the PDP for propagation within rooms. This simplified model provides a time-efficient means of predicting system performance. Predictions of this in-room PDP model are compared to results obtained from a finite-difference time-domain (FDTD) model. Additionally, comparisons of the IPDP model to measured data are presented. The RMS delay spread is the second central moment of the PDP of a propagation channel and is a measure of the communication link degradation due to multipath. We also show results of the estimated RMS delay spread from this model and show comparisons to the measured data. This IPDP model can be used to investigate the effects of variable room size and properties of the surfaces (or walls) on the decay characteristics of the PDP     

Ohmic contacts to n-type GaN

Ohmic contacts to n-GaN using Ag, Au, TiN, Au/Ti, Au/Mo/Ti, and Au/Si/Ti have been studied. The Fermi level of GaN appears to be unpinned, and metals and compounds with work functions less than the electron affinity resulted in ohmic contacts. Reactively sputter deposited TiN was ohmic as deposited. However, Au/Ti, Au/Mo/Ti, and Au/Si/Ti required heat treatments to form ohmic contacts, with the best being an RTA at 900°C. Ag and Au were shown to diffuse across the GaN surface at T>500°C; therefore, they are unstable, poor ohmic contact metallizations as single metals. The other contact schemes were thermally stable up to 500°C for times of 30 min.     

Alternating-direction implicit (ADI) formulation of the finite-difference time-domain (FDTD) method: algorithm and material dispersion implementation

The alternating-direction implicit finite-difference time-domain (ADI-FDTD) technique is an unconditionally stable time-domain numerical scheme, allowing the /spl Delta/t time step to be increased beyond the Courant-Friedrichs-Lewy limit. Execution time of a simulation is inversely proportional to /spl Delta/t, and as such, increasing /spl Delta/t results in a decrease of execution time. The ADI-FDTD technique greatly increases the utility of the FDTD technique for electromagnetic compatibility problems. Once the basics of the ADI-FDTD technique are presented and the differences of the relative accuracy of ADI-FDTD and standard FDTD are discussed, the problems that benefit greatly from ADI-FDTD are described. A discussion is given on the true time savings of applying the ADI-FDTD technique. The feasibility of using higher order spatial and temporal techniques with ADI-FDTD is presented. The incorporation of frequency dependent material properties (material dispersion) into ADI-FDTD is also presented. The material dispersion scheme is implemented into a one-dimensional and three-dimensional problem space. The scheme is shown to be both accurate and unconditionally stable.     

An overview of fault monitoring and diagnosis in mining equipment

Proper detection and diagnosis of failing system components is crucial to efficient mining operations. However, the harsh mining environment offers special challenges to these types of actions. The atmosphere is damp, dirty, and potentially explosive, and equipment is located in confined areas far from shop facilities. These conditions, coupled with the increasing cost of downtime and complexity of mining equipment, have forced researchers and operators to investigate alternatives for improving equipment maintainability. This paper surveys monitoring and diagnosis technologies that offer opportunities for improving equipment availability in mining. Expert systems, model-based approaches, and neural nets are each discussed in the context of fault detection and diagnosis. The paper concludes with a comparative discussion summarizing the advantages and disadvantages of each