Effect of hot pressing on processing and properties of BBN ceramics

BBN (BaBi₂Nb₂O₉) is very interesting and promising lead free material with relaxor properties in capacitors, sensors and actuators.     

Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

Preovulatory dynamics of ovarian steroid hormones in two mouse strains differing in the rate of meiotic maturation

Immature females of two inbred strains, KE and CBA, differing in the rate of meiotic maturation, were used in this study. On the 26th day they were treated with 5 IU PMSG (0 h) and 48 h later with 5 IU hCG. Groups of females were killed at 2 h intervals starting with 46 h and ovaries were then dissected for steroid analysis by appropriate RIAs. In both strains hCG injection resulted in a sharp increase in ovarian progesterone content with a simultaneous fall in androgen and oestradiol concentrations. However, in the CBA strain, progesterone concentration started to rise earlier while androgen concentration decreased later than in the KE strain. This subtle difference could be one of the factors contributing to the different maturation rate of KE and CBA strains.     

Analytical determination of intrinsic permeability of synthetic nonwoven filter fabrics

In this paper an analytical method for determining the permeability of nonwoven filter fabrics is presented. The derived formula shows that the intrinsic permeability, fully characterizing the porous medium, depends on fabric porosity, n, fibre diameter, d, and a shape factor determined experimentally.     

On the modelling of scalar and mass transport in combustor flows

The results of a numerical study of swirling and non-swirling combustor flows with and without density variations are presented. Constant-density arguments are used to justify closure assumptions invoked for the transport equations for turbulent momentum and scalar fluxes, which are written in terms of density-weighted variables. Comparisons are carried out with measurements obtained from three different axisymmetric model combustors. The three experiments cover recirculating flow, swirling flow and variable-density, swirling flow inside model combustors. Together, they offer wide ranging flow conditions to test the validity of the models. Results show that the Reynolds stress/flux models do a credible job of predicting constant-density, swirling and non-swirling combustor flows with passive scalar transport. However, their improvements over algebraic stress/flux models are marginal. The extension of the constant-density models to variable-density flow calculations shows that the models are equally valid for such flows. Therefore, the present results argue well for the adoption of constant-density models for variable-density flows until a successfully validated variable-density model is available.     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Amorphous Ni---N---W film as a diffusion barrier between aluminum and silicon

The influence of nitrogen on the diffusion barrier properties of amorphous Ni---W films was studied. Nitrogen was introduced into the amorphous Ni---W film by co-sputtering nickel and tungsten in a premixed gas mixture of 90% Ar and 10% N₂, resulting in the formation of amorphous Ni₃₀N₂₁W₄₉ film. X-ray analysis indicates a detectable crystallization of the amorphous film after 30 min annealing in vacuum at 600°C, accompanied by the formation of W₂N, but backscattering spectrometry (BS) reveals a reaction with silicon only at about 725°C. The Schottky barrier height of this amorphous film on n-Si is stable for 30 min annealing up to at least 550°C. With an aluminum overlayer, BS indicates that an amorphous Ni₃₀N₂₁W₄₉ film effectively prevents the metallurgical interaction between aluminum and silicon for 30 min up to 600°C. The Schottky barrier height of that contact configuration is also stable up to at least 550°C, suggesting that amorphous Ni---N---W films have attractive features as diffusion barriers.     

Effect of annealing on the structure and electrical properties of sulfur-doped amorphous c-BN layers

Undoped and sulfur doped amorphous cubic boron nitride (a-cBN) layers were deposited on to silicon substrates by reactive pulse plasma (RPP) method. Subsequently they were annealed at 475, 500 and 700 K for 1 h in pure nitrogen atmosphere. In this study structural and electronic properties of unannealed and annealed layers were investigated. The results show that a consequence of annealing is formation of microstructural stable nanocrystalline cubic boron nitride film as well as substitutional location of introducedin situ donor impurities. This resulted in creation of a-cBN(n-type)-Si(p-type) heterojunction.