Design data for solar heating of air Using a Heat Exchange and Storage System

An arrangement for heating with solar energy by means of a heat exchanger and storage coupled to the two water heaters has been described^*. In the present paper, the amount of the heat transferred from water to air in the shell-and-tube heat exchanger and the temperature of the outgoing air have been estimated by considering various parameters, viz. flow rate and temperature of incoming air, temperature of incoming and outgoing water, length and diameter of tubes, etc. Both natural and forced convection mode of heat transfer have been considered.

Under boundary conditions of free convection, heat transfer would be rapid and efficient with a possible reduction in the pipe length. The maximum permissible limit of pressure drop per foot of each tube for pipes of different diameters at different Reynolds numbers has been given.

As conditions of drying vary from material to material, the data presented will help in arriving at the final design of the shell-and-tube heat exchanger to be used in drying a particular material.     

Analysis of LDPC with optimum combining

Low density parity check (LDPC) codes have shown exceptionally good performance for single antenna systems over a wide class of channels. LDPC when implemented with a single input multiple output system with maximum ratio combining is optimum from the standpoint of maximising signal-to-noise ratio at combiner output without the presence of interferer. Optimum combining outperforms maximal ratio combining (MRC) in the presence of interferer(s). In this article, the performance of the LDPC codes with multiple receiver antennas with optimum combining in the presence of single interferer is investigated. The simulation results showed that LDPC codes of irregular construction are able to give high coding and diversity gain with optimum combining. The proposed LDPC optimum combined (LDPC–OC) system in Rayleigh fading channel in the presence of a single interferer improves the signal to interferer plus noise ratio by 2.62 dB with four receiver antennas and by 1.98 dB when the number of receiver antennas is three.     

Spectral engineering of terahertz quantum cascade lasers using focused ion beam etched photonic lattices

Focused ion beam etching has been used to introduce one-dimensional photonic lattices, of periods 9.11, 9.24, 9.44 /spl mu/m, between the cleaved facets of three 4.44 THz Fabry-Perot quantum cascade lasers. Singlemode lasing has been achieved at precisely defined wavelengths of 67.59, 68.48, 70.00 /spl mu/m, respectively.     

A Novel FRFT Beamformer for Rayleigh Faded Channels

A method of optimal beamforming for flat Rayleigh faded channels using the Fractional Fourier Transform (FRFT) is considered in this paper. It has been demonstrated through simulations that optimal beamforming with FRFT allows smaller mean-square errors in restoring signals degraded with linear time-or frequency variant distortions and Additive White Gaussian Noise. This is made possible by the additional flexibility that comes with free parameter ‘a’ of the fractional Fourier transform as oppose to the classical Fourier transform (FT). The method is especially useful in moving source problems, where Doppler Effect produces frequency shift when the source is moving, as in mobile and wireless communication where user produces the frequency shift while moving. In this paper it is shown through simulations that beamforming in fractional domain reduces BER as compared to time or frequency domain.     

Text extraction and document image segmentation using matched wavelets and MRF model.

In this paper, we have proposed a novel scheme for the extraction of textual areas of an image using globally matched wavelet filters. A clustering-based technique has been devised for estim ating globally matched wavelet filters using a collection of groundtruth images. We have extended our text extraction scheme for the segmentation of document images into text, background, and picture components (which include graphics and continuous tone images). Multiple, two-class Fisher classifiers have been used for this purpose. We also exploit contextual information by using a Markov random field formulation-based pixel labeling scheme for refinement of the segmentation results. Experimental results have established effectiveness of our approach.     

Cut off frequency and transit time analysis of lightly doped drain (LDD) MOSFETs

Analytical model for the transconductance, cut off frequency, transit time and fringing capacitance of LDD MOSFETs is presented with a simple approach. The analysis is carried out considering the LDD device as a conventional MOSFET with a series resistance [Z.-H. Liu et al., Threshold voltage model for submicrometer MOSFETs. IEEE Trans Electron Devices 1993; ED-40: 86–94] and a simple closed form expressions for cut off frequency and transit time is obtained. The total gate capacitance, i.e. the geometric and fringing capacitance, is calculated for both LDD and non-LDD devices and lower fringing capacitance is reported in LDD devices. Lower cut-off frequencies and higher transit time are reported in LDD devices for the same channel length.     

Dopant Migration-Induced Interface Dipole Effect in n-Doped GaAs/AlGaAs Terahertz Detectors

A heterojunction interfacial workfunction internal photoemission (HEIWIP) terahertz detector with ~1times10¹⁸cm^-3 n-type doped GaAs emitters in a multilayer GaAs/Al_0.13Ga_0.87 As heterostructure is presented. The detection mechanism is based on free carrier absorption with a broad response extending to ~ 5.26 THz (57 mum), corresponding to an effective workfunction of ~ 21.8 meV, which is much smaller than the offset expected for an Al fraction of x = 0.13 at a 1times10¹⁸ cm^-3 doping. This is attributed to a reduction of the conduction band offset by interface dipole formation between the accumulated negative charges at the interface states and migrated positively charged donors in the barrier. The device has a peak responsivity of 0.32 A/W at ~ 26 mum at 5 K. It is demonstrated that the dopant migration-induced interface dipole effect can be used to extend the zero response threshold frequency (f ₀) of n-type HEIWIP detectors.     

Performance analysis of a variable‐gain amplify‐and‐forward relayed mixed RF‐FSO system

In this work, an amplify‐and‐forward variable‐gain relayed mixed RF‐FSO system is studied. The considered dual‐hop system consists of a radio frequency (RF) link followed by a free space optical (FSO) channel. The RF link is affected by short‐term multipath fading and long‐term shadowing effects and is assumed to follow the generalized‐K fading distribution that approximates accurately several important distributions often used to model communication channels. The FSO channel experiences fading caused by atmospheric turbulence that is modeled by the gamma‐gamma distribution characterizing moderate and strong turbulence conditions. The FSO channel also suffers path loss and pointing error induced misalignment fading. The performance of the considered system is analyzed under the collective influence of distribution shaping parameters, pointing errors that result in misalignment fading, atmospheric turbulence, and path loss. The moment‐generating function of the Signal power to noise power ratio measured end‐to‐end for this system is derived. The cumulative distribution function for the Signal power to noise power ratio present between the source and destination receiver is also evaluated. Further, we investigate the error and outage performance and the average channel capacity for this system. The analytical expressions in closed form for the outage probability, symbol and bit error rate considering different modulation schemes and channel capacity are also derived. The mathematical expressions obtained are also demonstrated by numerical plots.