Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

Performance comparison of tracking filters in terms of predicted hitting point

This article describes the performance comparison of several tracking filters from the viewpoint of gun fire control. It is common that filter performance can be represented by the RMSE of the current state. However, for the design of a gun fire control system, the performance of the tracking filter in terms of prediction is more important since the current state proceeds with a designed dynamic model to a certain future which is used for the final gun order. It is shown that the predicted results amplify the current state RMSE and can be a good measure.     

Knowledge-based system for boundary detection of four-dimensional cardiac magnetic resonance image sequences

A strategy for a knowledge-based system to detect the interior and exterior boundaries of the left ventricle from time-varying cross-sectional images obtained by ECG-gated magnetic resonance imaging (MRI) is discussed. The system uses both fuzzy set theory and Dempster and Shafer theory to manage the knowledge and to control the flow of system information for more efficient use of limited computational resources and memory space. The key to the approach is that it performs edge detection on images through integration and unification of knowledge and information from edge candidates on all the slices and phases of the acquired cardiac MRI dataset. The analysis system does not base decisions on individual measurements, but on consensus opinions by combining many knowledge sources, some of which may not be completely accurate.     

Enhancement of the punch pin durability induced by the PVD coating in production process of the automotive inner pipe

This experimental studies were carried out in order to understand the effects of the PVD coating and the UNSM treatment of HSS55 (high speed steel 55) during the production of the automotive inner pipe by the plastic deformation of S45C. The field test and the SEM images revealed that the PVD coating is necessary in spite of the high compressive residual stresses which were formed at the head of a punch pin. Upon the application of the AlCrN coating with the UNSM treatment the productivity and reliability of a punch pin had improved more than about 2.6 times compared to that of the TiN coating without the UNSM treatment. It is likely that the improvement is caused by the decreased stress concentration factor by the ‘wrapped in oxides’ inside of an abrasion pit. The abrasion pits were mostly generated within range of 5% ∼ 50% of the diameter ratio from the end of a pin and reached the maximum value about 17% from the end of a pin.     

Effect of H2O evolving from TEOS based SiO2 film on the EEPROM cell characteristic

In this paper, we investigate the effect of water (H₂O) molecules evolving from silicon dioxide (SiO₂) film deposited by low pressure chemical vapor deposition (LPCVD) at 670 °C on the transistor characteristic of an electrically erasable programmable read only memory (EEPROM) cell. Fourier Transform Infra red (FT-IR) analysis reveals that H₂O is captured during film deposition and diffused to silicon surface during high thermal processing. The diffused H₂O molecules lower threshold voltage (V_t) of cell transistor and, thus, leakage current of the cell transistor is increased. In erased cell, V_t lowering is 0.25 V in which it increases leakage current of cell transistor from 1 to 100 pA. This results in the lowering of high voltage margin of a 512 Kb EEPROM from 2.8 to 2.6 V at 85 °C.     

Electrochemically Tuned Properties for Electrolyte‐Free Carbon Nanotube Sheets

Injecting high electronic charge densities can profoundly change the optical, electrical, and magnetic properties of materials. Such charge injection in bulk materials has traditionally involved either dopant intercalation or the maintained use of a contacting electrolyte. Tunable electrochemical charge injection and charge retention, in which neither volumetric intercalation of ions nor maintained electrolyte contact is needed, are demonstrated for carbon nanotube sheets in the absence of an applied field. The tunability of electrical conductivity and electron field emission in the subsequent material is presented. Application of this material to supercapacitors may extend their charge‐storage times because they can retain charge after the removal of the electrolyte.     

Hybrid film of chemically modified graphene and vapor-phase-polymerized PEDOT for electronic nose applications

A hybrid of graphene and conducting polymer holds great potential as the active materials for high performance chemical sensor application. In this work, a thin hybrid film of reduced graphene oxide (RG-O) and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated by means of vapor phase polymerization and explored as active material for chemical sensors. The chemical sensors based on hybrid film of RG-O and PEDOT are capable of detecting electrical signals caused by the absorption of trace levels of different analyte vapors with high sensitivity, selectivity and fast response.     

Vertical bridgman techniques to homogenize zinc composition of CdZnTe substrates

In order to improve the Zn homogeneity along the axial direction of CdZnTe boule, we have employed a modified Bridgman technique using a (Cd, Zn) alloy source in communication with the melt, whose temperature has been gradually changed from 800 to 840°C during growth. Electron probe microanalysis (EPMA) measurements of Zn composition in the boule shows an excellent homogeneity of Zn along the axis of the CdZnTe boule compared with results in a boule grown by using a fixed source temperature. We have performed a numerical simulation to obtain the approximate temperatures of additional heating and cooling needed to improve the radial Zn homogeneity. CdZnTe boule has been grown by seeded vertical Bridgman furnace with two zones of heater and cooler. Ultraviolet/visible spectroscopic measurements of Zn composition over the length of the boule indicate that the radial distribution of Zn composition is very homogeneous in the body region of the boule, where the radial variation of Zn composition is ±0.0005.     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²