Linear models‐based LPV modelling and control for wind turbines

The non‐linear behaviour of wind turbines demands control strategies that guarantee the robustness of the closed‐loop system. Linear parameter‐varying (LPV) controllers adapt their dynamics to the system operating points, and the robustness of the closed loop is guaranteed in the controller design process. An LPV collective pitch controller has been developed within this work to regulate the generator speed in the above rated power production control zone. The performance of this LPV controller has been compared with two baseline control strategies previously designed, on the basis of classical gain scheduling methods and linear time‐invariant robust H_∞ controllers. The synthesis of the LPV controller is based on the solution of a linear matrix inequalities system, proposed in a mixed‐sensitivity control scenario where not only weight functions are used but also an LPV model of the wind turbine is necessary. As a contribution, the LPV model used is derived from a family of linear models extracted from the linearization process of the wind turbine non‐linear model. The offshore wind turbine of 5 MW defined in the Upwind European project is the used reference non‐linear model, and it has been modelled using the GH Bladed 4.0 software package. The designed LPV controller has been validated in GH Bladed, and an exhaustive analysis has been carried out to calculate fatigue load reductions on wind turbine components, as well as to analyse the load mitigation in some extreme cases. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfobutylation of Beta-Cyclodextrin Enhances the Complex Formation with Mitragynine: An NMR and Chiroptical Study

Mitragynine (MTR), the main indole alkaloid of the well-known plant kratom (Mitragyna speciosa), is one of the most studied natural products nowadays, due to its remarkable biological effects. It is a partial agonist on the opioid receptors, and as such relieves pain without the well-known side-effects of the opioids applied in the clinical practice. MTR and its derivatives therefore became novel candidates for drug development. The poor aqueous solubility and low bioavailability of drugs are often improved by cyclodextrins (CyDs) as excipients through host-guest type complex formation. Among the wide variety of CyDs, sulfobutylether-beta-cyclodextrin (SBEβCyD) is frequently used and official in the European and U.S. Pharmacopoeia. Herein, the host-guest complexation of MTR with βCyD and SBEβCyD was studied using chiroptical and NMR spectroscopy. It was found by NMR measurements that MTR forms a rather weak (logβ₁₁ = 0.8) 1:1 host-guest complex with βCyD, while the co-existence of the 2MTR∙SBEβCyD and MTR∙SBEβCyD species was deducted from ¹H NMR titrations in the millimolar MTR concentration range. Sulfobutylation of βCyD significantly enhanced the affinity towards MTR. The structure of the formed inclusion complex was extensively studied by circular dichroism spectroscopy and 2D ROESY NMR. The insertion of the indole moiety was confirmed by both techniques.     

Mapping local microstructure and mechanical performance around carbon nanotube grafted silica fibres: methodologies for hierarchical composites

The introduction of carbon nanotubes (CNTs) modifies bulk polymer properties, depending on intrinsic quality, dispersion, alignment, interfacial chemistry and mechanical properties of the nanofiller. These effects can be exploited to enhance the matrices of conventional microscale fibre-reinforced polymer composites, by using primary reinforcing fibres grafted with CNTs. This paper presents a methodology that combines atomic force microscopy, polarised Raman spectroscopy, and nanoindentation techniques, to study the distribution, alignment and orientation of CNTs in the vicinity of epoxy-embedded micrometre-scale silica fibres, as well as, the resulting local mechanical properties of the matrix. Raman maps of key features in the CNT spectra clearly show the CNT distribution and orientation, including a 'parted' morphology associated with long grafted CNTs. The hardness and indentation modulus of the epoxy matrix were improved locally by 28% and 24%, respectively, due to the reinforcing effects of CNTs. Moreover, a slower stress relaxation was observed in the epoxy region containing CNTs, which may be due to restricted molecular mobility of the matrix. The proposed methodology is likely to be relevant to further studies of nanocomposites and hierarchical composites.     

Self‐assembled structures in polystyrene‐block‐polyisoprene‐blend‐polystyrene and polystyrene‐block‐poly(methyl methacrylate)‐blend‐polystyrene or ‐blend‐poly(methyl methacrylate) in the strong segregation regime

This study deals with the investigation of microphase‐separated morphology and phase behaviour in blends of polystyrene‐block‐polyisoprene with homopolystyrene and blends of polystyrene‐block‐poly(methyl methacrylate) with homopoly(methyl methacrylate) or homopolystyrene in the strong segregation regime using small‐angle X‐ray scattering and transmission electron microscopy as a function of composition, molecular weight of homopolymers, r_M and temperature. Parameter r_M = M_H/M_C (where M_H is the molecular weight of homopolymer and M_C that of the corresponding block copolymer) was selected to encompass behaviour of the chains denoted as a ‘wet brush’ (i.e. r_M < 1). The relative domain spacing D/D_o increases in the regime 0 < r_M?1 with increasing concentration of homopolymer w_P and increasing r_M but depends on the specific implemented morphology. We tested a new approximate D/D_o versus w_P relation in the strong segregation regime using block copolymers of high molecular weights. It is shown that the parameters r_M and χ^3/2N determine the slope of the D/D_o versus w_P relation in the strong segregation regime and the new approximation generally matches the experimental data better than the approximations used so far. Copyright © 2010 Society of Chemical Industry     

Lipid peroxidative damage on Cisplatin exposure and alterations in antioxidant defense system in rat kidneys: a possible protective effect of selenium

Cisplatin (Cis-diamminedichloroplatinum II, CP) is an important chemotherapeutic agent, useful in the treatment of several cancers, but with several side effects such as nephrotoxicity. The present study investigated the possible protective effect of selenium (Se) against CP-induced oxidative stress in the rat kidneys. Male Wistar albino rats were injected with a single dose of cisplatin (7 mg CP/kg b.m., i.p.) and selenium (6 mg Se/kg b.m, as Na(2)SeO(3), i.p.), alone or in combination. The obtained results showed that CP increased lipid peroxidation (LPO) and decreased reduced glutathione (GSH) concentrations, suggesting the CP-induced oxidative stress, while Se treatment reversed this change to control values. Acute intoxication of rats with CP was followed by statistically significant decreased activity of antioxidant defense enzymes: superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-Px), glutathione reductase (GR) and glutathione-S-transferase (GST). Treatment with Se reversed CP-induced alterations of antioxidant defense enzyme activities and significantly prevented the CP-induced kidney damage.     

Role of NEU3 Overexpression in the Prediction of Efficacy of EGFR-Targeted Therapies in Colon Cancer Cell Lines

The epidermal growth factor receptor (EGFR), through the MAP kinase and PI3K-Akt-mTOR axis, plays a pivotal role in colorectal cancer (CRC) pathogenesis. The membrane-associated NEU3 sialidase interacts with and desialylates EGFR by promoting its dimerization and downstream effectors’ activation. Among the targeted therapies against EGFR, the monoclonal antibody cetuximab is active only in a subgroup of patients not carrying mutations in the MAP kinase pathway. In order to better understand the EGFR-NEU3 interplay and the mechanisms of pharmacological resistance, we investigated the role of NEU3 deregulation in cetuximab-treated CRC cell lines transiently transfected with NEU3 using Western blot analysis. Our results indicate that NEU3 overexpression can enhance EGFR activation only if EGFR is overexpressed, indicating the existence of a threshold for NEU3-mediated EGFR activation. This enhancement mainly leads to the constitutive activation of the MAP kinase pathway. Consequently, we suggest that the evaluation of NEU3 expression cannot entirely substitute the evaluation of EGFR because EGFR-negative cases cannot be stimulated by NEU3. Furthermore, NEU3-mediated hyperactivation of EGFR is counterbalanced by the administration of cetuximab, hypothesizing that a combined treatment of NEU3- and EGFR-targeted therapies may represent a valid option for CRC patients, which must be investigated in the future.     

Analysis of the strain and hardness in self-cured and light-cured self-adhesive resin based cement

The study showed an application of the 3?D Digital Image Correlation Method (3?D-DIC) for detection of von Mises strain in samples of the self-etch, self-adhesive resin based cement (RBC). The aim was to determine and compare strain in the self-cured and light-cured Maxcem Elite, furthermore to investigate the hardness of these two cement-types. The experiment was carried out using two groups of Maxcem Elite (Kerr, Orange, CA, USA) samples; each tested group includes five (ø5?×?2?mm sized) samples, for both self-curing and light-curing mode. All samples were prepared by filling teflon ring-type molds. In addition, Vickers micro-hardness was measured for all samples. Maxcem Elite showed similar maximum strain values from 10% to 12% for both groups. Besides the maximum strain value, the 3?D-DIC method also enabled monitoring the change of strain field even after the recommended polymerization time. This method has shown that the polymerization shrinkage continues even after 10?min which disagreed with manufacturer’s suggestion. Group II showed maximum strain values of 12% in the peripheral zone after 10?min, in the last Stage (Stage 60). Statistically significant difference was not found in the overall strain between self- and light-cured Maxcem Elite neither peripherally (p?=?0.118) nor centrally (p?=?0.879). However, statistical significance was found in strain regarding central and peripheral zone in both, self-cured (p?=?0.020) and light-cured (p?=?0.002) Maxcem Elite. The mean von Mises strain values in the periphery of the samples (Section 0) were significantly higher compared to strain values in the center of the samples (for Section 1 and 2). The last stage (Stage 60) of the light-cured Maxcem Elite polymerization showed significantly higher values of von Mises strain compared to initial stage (Stage 0). Higher values of micro-hardness were noticed on the surfaces directly exposed to LED lamp after performing measurements of micro-hardness on light-cured samples.     

Passivity and Corrosion of Cu–<Emphasis Type="BoldItalic">x</Emphasis>Zn (<Emphasis Type="BoldItalic">x</Emphasis> = 10–40 wt%) Alloys in Borate Buffer Containing Chloride Ions

The electrochemical behaviour of Cu–xZn alloys and of Cu and Zn metals was studied by cyclic voltammetry and chronopotentiometry in borate buffer, pH = 9.2, with and without the addition of chloride ions in the range from 0.01 m to 1 m. In general, the shape of voltammograms of four Cu–xZn alloys with 10 – 40 wt.% of zinc resembles that of copper more than that of zinc. With increasing zinc content several characteristics of zinc are observed. In borate buffer containing chloride anions, Cu–xZn alloys are susceptible to pitting corrosion. The breakdown potential, E_b, at which the current density in the passive region starts to increase abruptly, becomes more negative with increasing zinc content in the alloy. The general relationship E_b = a + b log c_NaCl held in all cases, with constants a and b, however, being dependent on the zinc content of the alloy and on the chloride concentration. The corrosion resistance of Cu–xZn alloys was less than that of copper metal but significantly greater than that of zinc.     

Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites

Poly(ether ether ketone) (PEEK)/multi-wall carbon nanotube (MWNT) composites containing up to 17 wt% filler were prepared using a twin screw extruder. Transmission electron microscopy (TEM) images reveal that the MWNTs were homogeneously dispersed in the PEEK matrix. Linear viscoelastic measurements show that both complex viscosity and moduli increase with increasing MWNT concentration. The storage modulus, G^′ exhibits a dramatic seven order increase in magnitude around 1 wt%, leading to a solid-like low-frequency behaviour at higher loadings; the effect can be attributed to network formation at a rheological percolation threshold. Rheotens measurements show that the melt strength also increases significantly on addition of nanotubes, however, the drawability decreases. An analytical Wagner model was used to calculate the apparent elongational viscosity over a wide range of elongational rates, and to reveal significant increases on addition of MWNTs, with a similar threshold behaviour. The electrical response is also dominated by percolation effects, increasing by nearly 10 orders of magnitude from 10⁻¹¹ to 10⁻¹ S/cm, on the addition of only 2 wt% MWNTs. In contrast, the thermal conductivity and tensile elastic modulus of the composites increased linearly with nanotube content, rising by 130% and 50%, at 17 wt% MWNTs, respectively.     

Novel design approach for the creation of 3D geometrical model of personalized bone scaffold

Bone scaffolds provide a structural support for tissue development. Existing bone scaffolds are mainly characterized by complex porous designs whose shortcomings are a low level of permeability for growing tissue, and a difficult design customization. Scaffolds with nucleuses (rods or lattices) as basic elements should improve bone regeneration and enable higher design flexibility. In this paper, we present two new methods for building 3D geometrical models of personalized scaffolds, which are based on method of anatomical features. Methods are demonstrated in the case of scaffold for the mandible bone. This approach greatly reduces the designer effort and time, while enabling easy personalization of scaffolds’ shape and geometry.