Thermal dispersion effect on MHD flow of dusty gas and dust particles through hexagonal channel

In the field of dynamics for a dusty fluid, the volume of the dust particles and flow behaviour of particles in different conditions is very important in engineering problems such as atmospheric fallout, nuclear reactor, powder technology, performance of solid fuel rocket nozzles, air craft icing and so many others. An analysis is presented in this paper to study the effects of thermal dispersion and Viscous dissipation on unsteady flow of a viscous incompressible dusty gas through a hexagonal channel of uniform cross section under the influence of magnetic field and time dependent pressure gradient. The results show the change in velocity profile of gas and particles in the presence of magnetic field with time, thermal dispersion and volume fraction φ.     

Studies of the curing kinetics and thermal stability of epoxy resins using a mixture of amines and anhydrides

This article describes the curing and thermal behavior of diglycidyl ether of bisphenol A with phthalic anhydride (PA)/pyromellitic anhydride/diaminodiphenyl sulfone (DDS) or a mixture of anhydrides and amines in varying ratios as curing agents. The kinetics of the curing behavior was investigated with a multiple‐rate method. The activation energy of the curing reaction as determined in accordance with Ozawa's method was found dependent on the structure of the anhydride and on the ratio of amines to anhydrides. The activation energy was highest with sample DP3 (0.25 : 0.75) and DM3 (0.25 : 0.75). We evaluated the thermal stability of epoxy resin, cured isothermally, by recording thermogravimetric traces in a nitrogen atmosphere. The char yield was highest for resins cured with a mixture of DDS and PA (0.5 : 0.5) and a mixture of DDS and pyromellitic dianhydride (0.25 : 0.75). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3919–3925, 2006     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Effects of Hall current and two temperatures in transversely isotropic magnetothermoelastic with and without energy dissipation due to ramp-type heat

The present article is concerned with the investigation of disturbances in a homogeneous transversely isotropic thermoelastic rotating medium with two temperatures, in the presence of the combined effects of Hall currents and magnetic field. The formulation is applied to the thermoelasticity theories developed by Green-Naghdi theories of type-II and type-III. Laplace and Fourier transform techniques are applied to solve the problem. The analytical expressions of displacements, stress components, temperature change, and current density components are obtained in the transformed domain. A numerical inversion technique has been applied to obtain the results in the physical domain. Numerical simulated results are depicted graphically to show the effect of Hall current and two temperatures on resulting quantities. Some special cases are also deduced from the present investigation.     

Analysis of DC and AC properties of a humidity sensor based on polyaniline–chromium oxide composites

Polyaniline–Chromia (PANI–Cr₂O₃) composites were synthesized by in situ polymerization. The prepared composites were characterized by scanning electron microscopy, X-ray diffraction and Fourier transforms infrared spectroscopy. The structural studies confirm the polymerization of aniline over Cr₂O₃ particles which results into strong interaction between PANI and Cr₂O₃ particles. Direct current conductivity of composites increases with increase in temperature. Among all composites, 30 wt% shows high conductivity. The humidity sensing mechanism of the PANI–Cr₂O₃ composites is studied and change in its resistance with respect to percentage relative humidity ranging from 20 to 95 % is recorded. The humidity sensing studies shows that the change in the resistance is due to the uncurling of polymer chains by the absorption of water vapor which leads to increase in conduction paths. The results indicate better humidity sensing response by the addition of Cr₂O₃ particles to PANI, among all the composites, 30 wt% composite shows higher sensitivity.     

Generalized Filter Topology Using Grounded Components and Single Novel Active Element

This paper introduces a new active element combining the useful features of differential voltage, dual-X and first generation current conveyors. The new proposed active element is further utilized to introduce a new generalized filter topology employing grounded components only. The proposed single active element-based topology benefits from first-order and second-order filter realization by appropriate impedance specialization. The circuit topology with single current input provides two output currents and voltages in each case. A thorough study of proposed active element along with extensive simulations is carried out to validate the filter topology. A detailed non-ideal study is also given. To further support the usefulness of filter topology, higher-order filters are also realized. The new active element and the new filter structure provide advancement to the existing knowledge; with the scope of active element being further exploited for analog signal processing applications in general. The proposed differential voltage dual-X first generation current conveyor (DV-DXCCI) and its filtering applications are simulated using TSMC 0.25  \(\upmu \) m technology.     

NSGA-II-Based Design Space Exploration for Energy and Throughput Aware Multicore Architectures

Multicore architectures are mainstream due to ever increasing demand of throughput by modern applications. However, the suboptimal utilization of available resources in these architectures may imply an inevitable energy overhead. This energy overhead can only be avoided if the multicore systems support reconfiguration of available resources as per application demand. To achieve the target objectives (i.e., Energy efficiency with Throughput maximization) in multicore systems, many decision variables need to be optimized or analyzed to find the better trade-off. Heuristic-based approaches are aimed to provide a good-enough solution instead of a lengthy exhaustive search. This paper presents an Evolutionary Algorithm (EA)-based approach, i.e., Nondominated Sorting Genetic Algorithm-II (NSGA-II). Three decision variables, i.e., number of cores, cache size and frequency are used to find best solution. The proposed approach is validated over a set of parallel benchmarks using a cycle accurate simulator. The results show a significant amount of energy saving along with minimal impact on the throughput of the system.     

Effect of bandwidth modifications on the quality of speech imitated by Alexandrine and Indian Ringneck parrots

Alexandrine and Indian Ringneck parrots are known for imitating the voice of other animals. The objective of this paper is to estimate the spectral limits of the imitated sounds produced by parrots and quantify the quality. The investigations showed that 500–3000 Hz spectral band is adequate for retaining the important perceptual information in the phrases uttered by human speakers and imitated by parrots. Investigations confirmed that the Indian Ringneck parrots are capable of following the formant structure and pitch contour of the phrases uttered by the human subjects. The dynamic range of the pitch of Indian Ringneck parrots was observed as higher than that of the human subjects. A rise of about 1000 Hz in the formant F1 of the parrots was observed, indicating the tongue height small and beak opening, relatively large, as compared to that of human subjects. The quality of some of the synthesized and processed phrases was found slightly better as compared to that of the original phrases because of the inherent enhancement capability of the Harmonic plus noise model (HNM). The average Mean opinion score (MOS) score of the Indian Ringnech parrots for the original, synthesized, and processed phrases was observed as 2.65, 2.59, and 2.77, respectively. The investigations may be beneficial for studying the behavior of endangered birds, defense related activities, safeguarding the crashes with aero planes, and safeguard of the birds from wind power generator etc.