Measurement of AC conductivity and dielectric properties of flexible conductive styrene–butadiene rubber‐carbon black composites

Flexible conductive polymer composites were prepared using styrene–butadiene rubber (SBR) as a matrix and conductive carbon black as filler. The filler loading was varied from 10 to 60 phr. The effect of frequency, filler loading, temperature, and applied pressure on the AC conductivity, permittivity, and loss factor of the composites was studied. The AC conductivity of low and high loaded composites was found to be frequency dependent and independent respectively. The permittivity and the loss factor were continuously decreasing with increasing frequency. The increase in filler loading increased the AC conductivity, dielectric constant, and loss factor of the composites. Increase in temperature imposed increase in conductivity and permittivity of the composites. With increasing applied pressure the properties showed exponential increase. The effect of time under a constant compressive stress was studied and dielectric relaxation times were evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 986–995, 2007     

Physical and mechanical characterization of oriented polyoxymethylene produced by die-drawing and hydrostatic extrusion

The mechanical properties and structure of uniaxially oriented polyoxymethylene (POM) produced by two solid-state processes, hydrostatic extrusion and die-drawing, are compared. In the former process there is no net component of tensile stress whereas in the latter case the sample is subjected to axial tensile stresses at the die-exit. The tensile nature of the stresses in die-drawing causes void formation and growth in the oriented sample whereas, in the case of hydrostatic extrusion, voids are suppressed due to the compressive stress fields. The mechanical properties of the oriented samples are compared together with relevant structural data, and their differences discussed.     

Scalable Lanthanum Titanate (La2Ti2O7) nanostructures as UV photodetectors

Thermally and chemically stable perovskite-like layer structures have attracted extensively in the field of energy and environmental applications. In this study, La₂Ti₂O₇ was synthesized by the solvothermal method at 180 °C. This method provides high pure and homogeneously dispersed nanorods of orthorhombic phase having length of 250 nm and width of 70 nm. Even though this is a low-temperature synthesis method, it yields high crystalline nature after calcination. The novelty of this work is its synthesis methodology by the solvothermal route to achieve lower weight loss of La₂Ti₂O₇. Furthermore, they exhibit narrow absorption in the UV-region from 200 to 350 nm, makes it possible to fabricate it as UV photodetector at ambient condition. In presence of UV illumination at 390 nm, it shows sharp photocurrent response with the decay time of 1.7 s.

     

Microstructural,Optical, Morphological,Luminescence and Electrical Properties of a CdO Nanocomposite Synthesized by a Chemical Route Assisted Microwave Irradiation Technique

This article reports a CdO nanocomposite successfully synthesized by a chemical route assisted microwave irradiation technique. Sodium dodecyl benzene sulfonate (SDBS) is a good surfactant and it is used in forming the nanocomposite. The microwave irradiation technique is simple and less time consuming for preparing a nanocomposite. The obtained products were characterized by different techniques such as X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), UV-Vis DRS, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), room temperature photoluminescence (PL), and DC electrical conductivity. The grain size determined by the XRD pattern was found to be 20–40 nm. The lattice fringes and nanocomposite morphology particle size were obtained by TEM. The room temperature PL spectra reveal blue and red emissions. The calculated average electrical conductivity was around 5.1 × 10⁻⁸ to 2.02 × 10⁻⁸ S/cm.

     

Evaluation of realtime people tracking for indoor environments using ubiquitous motion sensors and limited wireless network infrastructure

We present the development and evaluation of a realtime indoor localisation system for tracking people. Our aim was to track a person’s indoor position using dead-reckoning, while limiting position error without depending on extensive wireless network infrastructure. The Indoor People Tracker used wearable motion sensors, a floor-plan map and a limited wireless sensor network for proximity ranging. We evaluated how the position accuracy of the Indoor People Tracker was affected by floor-plan map features, wireless proximity range and motion information. The advantage of the Indoor People Tracker was found; it was able to achieve accurate position resolution with minimal error, while not depending on wireless proximity.     

Adsorption of Chrysoidine R by using fly ash in batch process

This investigation deals with effective utilization of fly ash as adsorbent for the removal of Chrysoidine R from the aqueous solution. The fly ash is a major byproduct generated in coal-based thermal power plants and has good potential for use as an adsorbent. A series of experiments were carried out in a batch adsorption technique to obtain the effect of process variables viz. contact time, pH (2, 4, 6 and 8) initial concentration of the dye (400, 600, 800 and 1000mgL(-1)), amount of the adsorbent (125, 250, 375 and 500mgL(-1)), and temperature (303, 313, 323 and 333K) on adsorption. The concentration of dye was determined by spectrophotometer. The results showed that as the amount of the adsorbent was increased, the percentage of dye removal increased accordingly; higher adsorption percentage was observed at lower concentration of chrysoidine. The adsorption data were analyzed using Langmuir and Freundlich isotherms. The adsorption was found to obey pseudo-first order kinetics. An intra particle diffusion model was used to fit the experimental data. The thermodynamic parameters such as standard change in free energy, enthalpy and entropy of adsorption have been calculated. Adsorption of Chrysoidine R on fly ash was found to be an exothermic reaction.     

Nuclear magnetic resonance spectral analysis of polymer-supported reagents and catalysts

High resolution and cross-polarisation/magic angle spinning nuclear magnetic resonance spectroscopy of crosslinked polystyrene and of reagents and catalysts supported on crosslinked polystyrene and silica gel are reviewed. The materials studied include ionexchange resins, resins in solid phase peptide synthesis, organic synthetic reagents, phase transfer catalysts, transition metal catalysts, and liquid chromatography column packings. ¹³C and ³¹P n.m.r. spectra have been used to identify structures and to study macromolecule and micromolecule dynamics. New spectra of crosslinked polystyrenes and supported reagents are reported. Procedure to obtain qualitative and quantitative spectra are recommended.     

Computer‐aided design of tailor‐made ionic liquids

Ionic liquids (IL), with their negligible vapor pressure, have the potential to replace volatile organic solvents in several processes. They also exhibit other unique characteristics, such as high thermal stability, wide liquid range, and wide electrochemical window, which make them attractive for many important applications. In addition, millions of ILs can be formed through different combination of cations, anions, and other functional groups. Till now, majority of work on IL selection, for a given application, is guided by trial and error experimentation. In this article, we present a computer‐aided IL design framework, based on semiempirical structure‐property models and optimization methods, which can consider several IL candidates and design optimal structures for a given application. This powerful methodology has great potential to act as a knowledge‐based framework to aid synthetic chemists and engineers develop new ILs. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4627–4640, 2013     

Statistical analysis of effects of experimental variables on mass transfer coefficient in a novel hybrid bubble column using Box–Behnken design

Statistical analysis of effects of experimental variables on volumetric mass transfer coefficient in a novel hybrid rotating and reciprocating perforated plate bubble column is studied. The novel bubble column is designed indigenously using bevel gear arrangement. Agitation level, superficial gas velocity, superficial liquid velocity, perforation diameter and plate spacing are the experimental variables. Air–sodium sulphite solution system is used in this investigation. The Box–Behnken design in response surface methodology is employed for statistical analysis. The relationship between experimental variables and the desired response of volumetric mass transfer coefficient is established for this novel hybrid column. The linear, quadratic and interactive effects of experimental variables are found to be significant on the desired response of volumetric mass transfer coefficient. Results show that the data adequately fit into the second‐order polynomial model. An F‐test and P‐value show the significance of parameters on volumetric mass transfer coefficient. © 2012 Canadian Society for Chemical Engineering     

Impact of conditioning regimens and time on adhesion of a fiber post to root dentin using two resin cements

The aim of this study was to evaluate the influence of irrigation protocols on the bond strength of a glass fiber post bonded to dentin using two resin cements. In 200 root-filled teeth, post space was prepared and divided into five groups (n?=?40) based on the irrigation protocol: group 1 (3% sodium hypochlorite), group 2 (3% sodium hypochlorite – 17% Ethylene diamine tetraacetic acid), group 3 (a mixture of sodium hypochlorite and etidronic acid), group 4 (sodium hypochlorite – QMix), and group 5 (distilled water). Samples were subdivided into two subgroups (n?= 10) and fiber posts were cemented using subgroup A (Self-adhesive dual-cure resin cement; SEA) or B (dual-cure resin cement following an etch-and-rinse protocol, ER). Push-out bond strength was performed after 24 h and four months (n?= 10) and failure modes were categorized. Statistical analysis of data was carried out by appropriate analyses (p < 0.05). The irrigation protocol and the resin cement had a significant impact on push-out bond strength. Subgroup A group showed lower bond strength than B at both time periods when 3% NaOCl–17% EDTA and 1:1 mixture of 6% NaOCl + 18%EA protocols were used. Three percent NaOCl used in combination with 17% EDTA or QMix significantly decreased the push-out bond strength of ER at the end of four months (p < 0.05). In conclusion, dual-cure resin cements bonded with etch-and-rinse protocol showed highest bond strength when a mixture of NaOCl and etidronic acid was used as root canal irrigant. These values were differentially influenced by time.