Expert system for dispatch control in restoration of ehv power system after complete blackout

Present-day power systems operate with high reliability, and it is rare that a blackout will extend over an entire system swiftly and securely. This paper considers automatic power supply to loads after a complete blackout of a system. First, taking into account characteristics of generators, loads, and initial power sources, a method is proposed of allocating several generators to each load in parallel to the system and supplying power to the load sequentially. Second, to remove the imbalance between supply and demand of power, a method is proposed of adjusting the amount of supply and generation according to a present imbalance and the sum of past ones. Third, to automatically issue orders for start-up, parallel, follow-up, stand-by, and stoppage of generators, several rules for each power station are set and an expert system is made based on them. Finally, the expert system is applied to a model power system, and it is verified that it can restore loads without any trouble for a complete blackout which occur at any time of a day and in any restoration pattern.     

New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

FLASK-SG: A program to compute chemical equilibria in metamorphic petrology

Chemical equilibrium calculation program for metamorphic petrology, FLASK-SG, was written for Unix variants (Linux, IRIX, Tru64 UNIX). It is also ported to Windows 95/98. The user specifies a temperature, pressure, and substance amounts (in moles of any chemical formula in C–H–O–Si–Al–Ti–Fe–Mn–Mg–Ca–Na–K system) to this program, then it calculates the stable mineral assemblage, mineral amounts, and gas composition under the given conditions using Gibbs free energy minimization method with the Holland and Powell (1990) data set. Searching algorithm for the stable mineral assemblage is the Metropolis Monte Carlo method. The coding language is C++, and experimental object oriented programming style is adopted to make the main program part as a class library. Model-dependent functions such as fugacity coefficients and activities are implemented as virtual methods of the “systems” class, so they can be easily changed as methods of inherited class from the “systems” class. These characteristics are aimed for a future “simulation kit”.     

Mechanism of simultaneous tripping of ground directional relays in a 6.6‐kV distribution system

In Kyushu Electric Power's 6.6‐kV distribution system, after a single‐phase ground fault occurred in the circuit of a distribution line, we experienced a phenomenon in which the analogue ground directional relays of the other circuits linked to the same bank were simultaneously tripped. In this paper, focus is placed on the mechanism and possibility of simultaneous tripping of ground directional relays. This mechanism was examined in an experiment carried out using an analogue simulator. The results of the test revealed that such simultaneous tripping was attributable to the neutral instability phenomenon of grounding potential transformers installed in an isolated neutral system. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(2): 23–30, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20919     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Modeling method of fast transient for unsymmetrical stray capacitance to ground

Transient characteristic of power system apparatus in a high‐frequency region should be modeled with stray capacitors. Pi‐type circuit is commonly used to represent the stray capacitors between terminals and those to the ground. A modeling method for the pi‐type circuit with unsymmetrical stray capacitances to ground is proposed in this paper. To obtain the unsymmetrical stray capacitances to ground, a couple of differential‐mode measurements are interchangeably applied. The parameters of the pi‐type circuit can be determined by the measurements with a common‐mode measurement. A nonlinear least‐squares method is used to estimate the capacitances. The method is applied to compose an equivalent circuit of a miniature circuit breaker (MCB), which has unsymmetrical stray capacitances to ground. The application is not only for the MCB but also for a scaled model of a high‐voltage circuit breaker. A gas‐filled arrester is used as a voltage sensor for the test because the voltage across the stray capacitor cannot be directly measured due to the input capacitance of a voltage probe. A transient response of the MCB with the gas‐filled arresters is numerically simulated to show the usefulness of the equivalent circuit. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Influence of Tip Clearance on Blade Vibration of Vaneless Radial Turbine

With the increasing demand of turbochargers with high performance and low turbo lag, high cycle fatigue (HCF) of radial turbine blades has become the most commo...