Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.     

Recurrent erosion after photorefractive keratectomy

Recurrent erosion of the corneal epithelium has been treated successfully by phototherapeutic keratectomy when convention therapy has failed. We present a case of recurrent corneal erosion occurring 1 year after photorefractive keratectomy in a 55-year-old myopic woman. No corneal abnormalities were previously identified in either the affected or the fellow eye. This case demonstrates the potential for ineffective healing of the corneal epithelial basement membrane complex after excimer laser photorefractive keratectomy.     

Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Eine allgemeine Berechnungsmethode für Wärmeübertragerschaltungen

A general method for calculating any heat exchanger network is presented. As heat exchanger networks can be considered as coupled heat exchangers, that are supplied in a predetermined order, it is convenient to consider even a single heat exchanger with complicated flow patterns as a network composed of several ideally-supplied, coupled devices. The advantage of this method lies in its higher accuracy and the use of a simpler calculation formula for an ideal device model. These advantages far outweigh the disadvantages of the arduous iterative type of calculation used to establish the temperature between ideal devices. The presented method allows, for the first time, without using the iterative method, a calculation of heat exchanger networks based upon the principle of coupled matrix equations. These equations are for any given heat exchanger network simply allocated parameters, and therefore this method is especially suited for the calculation of any network modification. For the application of this method is no special software necessary. The solution of the model equations is obtained very easy and clear with mathematical standard software, e.g. Mathcad or Maple.     

Scarring trachoma is associated with polymorphism in the tumor necrosis factor alpha (TNF-alpha) gene promoter and with elevated TNF-alpha levels in tear fluid

Tumor necrosis factor alpha (TNF-alpha) may play a central role in the disease pathogenesis which occurs as a consequence of chlamydial infection. To investigate the importance of TNF-alpha gene promoter polymorphisms and TNF-alpha levels in tear fluid in scarring trachoma, a large matched-pair case-control study was performed in The Gambia. The -308A allele was present in a higher proportion of patients (28.4%) than controls (18.4%), with an increasing association for homozygotes (chi2 for trend, P = 0.032; allele frequency, 0.163 in patients and 0.099 in controls; chi2, P = 0.025). For the -238A allele, the association was similar but not significant. The disease association was highly significant when the number of either -308A or -238A sites in an individual was considered (P = 0.003). TNF-alpha promoter alleles are tightly linked to some HLA class I and II alleles, but multivariate analysis confirmed that the disease associations were independent of HLA, although a class I allele, A*6802, is also associated with disease. TNF-alpha was more frequently detected in tear samples from patients (27.6%) than from controls (15.9%), increasingly so for higher levels of detectable TNF-alpha (P = 0.015). Among patients, detectable TNF-alpha in tears was highly associated with the presence of ocular chlamydial infection (P < 0.001). The results indicate that TNF-alpha plays a major role in the tissue damage and scarring which occurs as a consequence of Chlamydia trachomatis infection.     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

Artefactual cleavage of E coli H-NS by OmpT

In the bacterium Escherichia coli, H-NS-(H1, H1a) is a heat-stable protein with a molecular mass of 15.5 kDa involved in nucleoid organisation and gene regulation linked to certain signal transduction pathways. We have shown that, following addition of preparations of everted inner membrane vesicles, heat-stable cleavage products of approximately 10 kDa of H-NS are formed in vitro from newly synthesised, radio-labelled H-NS and from purified H-NS. The 15.5 kDa protein and its cleavage products were also recovered from a minicell system. These results raised the possibility that cleavage of H-NS is physiologically significant. However, the cleavage of H-NS observed appears to occur during cell breakage and to depend on the method of protein extraction and the presence of the outer membrane protease, OmpT. Nevertheless, the results indicate that H-NS may contain at least two separate domains with cleavage occurring between these domains at a preferred OmpT site. Failure to take account of H-NS cleavage in sample preparation and analysis can lead to serious underestimation of H-NS levels.     

Combination of coating and heat treatment processes

For a proper use of coated tools and components excellent coating properties as well as excellent substrate properties of the coating/substrate composite are necessary. A well known example is the load support of hard steel substrates for thin wear resistant coatings. Therefore coating processes must be combined with heat treatment processes of the substrates, whereby several practical processing constraints like order and compatibility of the applied treatment procedures must be considered. The combination of CVD-coating plus laser beam hardening is an example of a post coating heat treatment. Applications may be possible for large forming tools made of high alloyed tool steels, which nowadays are usually through hardened after CVD-coating. Laser beam hardening offers the possibility, to harden only the highly loaded edges of the tools. The advantages of this combination are short process time, less distortion and compressive residual stresses in the substrate surface. CVD-coatings can endure laser beam hardening with suitable parameters. The influence of CVD TiN-coated steel substrates and laser beam hardening parameters on microstructures and properties of coating/substrate compounds have been investigated. Special attention was paid to overlapping hardening zones, which may occur at the start and end points of a laser hardened track. In summary, the combination of coating and heat treatment processes show a high potential to produce coating/substrate compounds with excellent coating properties as well as excellent substrate properties.     

阿维斯塔波莱瑞特厂炉卷轧机新技术

阿维斯塔波莱瑞特厂正在进行一个现代化改造项目，以提高炉卷轧机的生产能力，达到年产100万吨。但是，由于在阿维斯塔波莱瑞特厂炉卷轧机上的现有技术已达到极限，只有通过对轧机及自动化系统进行现代化的改造才有可能提高和增强轧机的利用率和易维护性。