Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Studies on the nuclear magnetic resonance spectra of olefinic protons of conjugated fatty acid methyl esters

The NMR spectra of olefinic protons in the four representative conjugated fatty acid methyl esters, methylcis-9,trans-11-octadecadienoate, methyltrans-9,trans-11-octadecadienoate, methyl α eleostearate, and methyl β eleostearate, were studied. The chemical shift of each olefinic proton in these compounds was determined by considering their intramolecular environment. Coupling constants were also obtained as the results of spectral analysis.     

Thermal Expansion of Solid Solutions in the ZrTiO4—In2O3—M2O5 (M = Sb, Ta) System

Axial and dilatometric thermal expansions and phase transformations were studied for solid solutions having the α-PbO₂ structure in the ZrTiO₄—In₂O₃—M₂O₅ (M = Sb, Ta) system with nominal formulas of Zr _x Ti _y In _z Sb _z O₄ and Zr _x Ti _y In _z Ta _z O₄ where x + y + 2 z = 2. With increased substitution of z , the cell volume increased, the difference in the b parameters at room temperature between those quenched from 1400° and 1000°C decreased, and the thermal expansion decreased. The axial thermal expansion of ZrTi _y In _z · Ta _z O₄ with z = 0.3 was almost identical with that of HfTiO₄, and those with z = 0.4 and z = 0.45 were smaller than that of HfTiO₄. Unit-cell volumes of these compound were compared with those of single oxides to make it clear that the unit-cell volume of ZrTiO₄ was small anomalously and to distinguish the normal and abnormal substitution systems. These results were explained by the working hypothesis proposed for these compounds.     

Spatiotemporal conversion of auditory information for cochleotopic mapping

Auditory communication signals such as monkey calls are complex FM vocal sounds and in general induce action potentials in different timing in the primary auditory cortex. Delay line scheme is one of the effective ways for detecting such neuronal timing. However, the scheme is not straightforwardly applicable if the time intervals of signals are beyond the latency time of delay lines. In fact, monkey calls are often expressed in longer time intervals (hundreds of milliseconds to seconds) and are beyond the latency times observed in the brain (less than several hundreds of milliseconds). Here, we propose a cochleotopic map similar to that in vision known as a retinotopic map. We show that information about monkey calls could be mapped on a cochleotopic cortical network as spatiotemporal firing patterns of neurons, which can then be decomposed into simple (linearly sweeping) FM components and integrated into unified percepts by higher cortical networks. We suggest that the spatiotemporal conversion of auditory information may be essential for developing the cochleotopic map, which could serve as the foundation for later processing, or monkey call identification by higher cortical areas.     

Interdiffusion in Co-Mn alloys

Interdiffusion coefficient in cobalt-manganese alloys has been determined by Matano's method in the temperature range between 1133 and 1423 K on (pure Co)-(Co-30.28 at. pct Mn alloy) and (pure Co)-(Co-51.76 at. pct Mn alloy) couples. This, ∼D, has been found to increase with the increase of manganese content. However, the activation energy (∼Q) and frequency factor ( ₀) show a maximum at about 10 at. pct Mn. The concentration dependence of and has been discussed taking into account the thermodynamic properties of the alloy. The difference in between the ferro- and paramagnetic phases in Co-5 at. pct Mn alloy has been found to be 24 kJ/mol, which is larger, than that for the diffusion of Mn⁵⁴ in this alloy. Further it has been found that the Kirkendall marker moves toward manganese-rich side, showing that manganese atoms diffuse faster than cobalt atoms. From the marker shift, the intrinsic diffusion coefficients,D _Co andD _Mn, at 33 at. pct Mn have been determined as follows:D _Co=0.22×10⁻⁴ exp(−263 kJ mol⁻¹/RT) m²/s, andD _Mn=0.98×10⁻⁴ exp(−229 kJ mol⁻¹/RT) m²/s.     

Development and Evaluation of a Robust Sandwich Immunoassay System Detecting Serum WFA-Reactive IgA1 for Diagnosis of IgA Nephropathy

Aberrant glycosylation of IgA1 is involved in the development of IgA nephropathy (IgAN). There are many reports of IgAN markers focusing on the glycoform of IgA1. None have been clinically applied as a routine test. In this study, we established an automated sandwich immunoassay system for detecting aberrant glycosylated IgA1, using Wisteria floribunda agglutinin (WFA) and anti-IgA1 monoclonal antibody. The diagnostic performance as an IgAN marker was evaluated. The usefulness of WFA for immunoassays was investigated by lectin microarray. A reliable standard for quantitative immunoassay measurements was designed by modifying a purified IgA1 substrate. A validation study using multiple serum specimens was performed using the established WFA-antibody sandwich automated immunoassay. Lectin microarray results showed that WFA specifically recognized N-glycans of agglutinated IgA1 in IgAN patients. The constructed IgA1 standard exhibited a wide dynamic range and high reactivity. In the validation study, serum WFA-reactive IgA1 (WFA+-IgA1) differed significantly between healthy control subjects and IgAN patients. The findings indicate that WFA is a suitable lectin that specifically targets abnormal agglutinated IgA1 in serum. We also describe an automated immunoassay system for detecting WFA+-IgA1, focusing on N-glycans.     

Properties of Bi-doped PbTe layers grown by liquid phase epitaxy under controlled Te vapor pressure

Effects of Bi doping in PbTe liquid-phase epitaxial layers grown by the temperature difference method under controlled vapor pressure (TDM-CVP) are investigated. For Bi concentrations in the solution, x_Bi, lower than 0.2 at.%, an excess deep-donor level (activation energy E_d≈0.03–0.04 eV) appears, and Hall mobility is low. In contrast, for x_Bi>0.2 at.%, Hall mobility becomes very high, while carrier concentration is in the range of 10¹⁷ cm⁻³. Inductive coupled plasma (ICP) emission analysis shows that, for x_Bi=1 at.%, Bi concentration in the epitaxial layer is as high as N_Bi=2.3–2.7 × 10¹⁹ cm⁻³. These results indicate that Bi behaves not only as a donor but also as an acceptor, and the nearest neighbor or very near donor-acceptor (D-A) pairs are formed, so that strong self-compensation of Bi takes place. Carrier concentration for highly Bi-doped layers shows a minimum at a Te vapor pressure of 2.2 × 10⁻⁵ torr for growth temperature 470°C, which is coincident with that of the undoped PbTe.     

100 Å-thick tunnel junction by double impurity doping liquid phase epitaxy for V-band TUNNETT oscillation

The tunnel injection transit time (TUNNETT) diodes with p⁺p⁺n⁺n⁻n⁺ structure were fabricated by liquid phase epitaxy (LPE). About 100 Å tunnel junction (p⁺n⁺) was successfully prepared by the double impurity diffusion of Ge and S during LPE growth. Continuous wave (CW) oscillation was realized at 51.520 GHz in the V-band cavity with the phase noise of −60 dBc/Hz at 1 kHz bandwidth.     

SIR Weighting Combining Diversity Using Matched Filter for Personal Communication Systems

We propose a novel SIR weighting postdetection combining diversity scheme with a new accurate SIR estimation method. The SIR is estimated and used as the weighting factor to compensate severe cochannel interference, one of the most important issues for PCS in terms of frequency utilization. Theimprovement offered by the proposal depends on SIR estimation accuracy.The SIR is, in this paper, estimated by a matched filter where theauto-correlation between received signal and unique word is calculated. Computer simulationsconfirm that the SIR of each diversity branch can be estimated easily andaccuratelyby the proposed SIR estimation method. The proposed diversity scheme achievesaperformance very close to that of ideal SINR weighting diversity underRayleighfading with severe cochannel interference. When average SIR = 10 dB and thenumber of branches(L)=4, the proposed diversity scheme lowers the requiredE_b/N₀ by 5 dB at BER = 1×10^-3compared to conventional maximal ratio combining diversity. This paper alsopresentsthe unique word length required to realize adequate performance, i.e.,robustnessagainst high-pitch Rayleigh fading.     

Overview on Technical Issues for Future Mobile Network and a Proposal of DLC Scheme in Wireless Link

This paper gives an overview on technical issues for future mobile networks. the QoS control for multimedia services, security function, expansion of network capacity, expansion of address space, multicast function, radio link quality and mobility control of terminals are taken up as technical issues.Then, a novel DLC scheme in wireless link named EREP-ARQ (Estimation and Report of Error Pattern ARQ) which can reduce the retransmission ratio is proposed. In this scheme, error pattern generated in the radio link is estimated at the receiver side and the estimated error pattern is returned to the transmission side. If the estimation is correct, no retransmission is needed. Compared to conventional SR-ARQ, throughput can be improved by17% and Cell Loss Ratio (or Packet Loss Rate) can be reduced to less than 1/10 by the proposed EREP-ARQ.