Preliminary studies using hybrid mediated electrochemical oxidation (HMEO) for the removal of persistent organic pollutants (POPs).

This study investigates the hybrid mediated electrochemical oxidation (HMEO) technology, which is a newly developed non thermal electrochemical oxidation process for organic destruction. A combination of ozone and ultrasonication processes to the mediated electrochemical oxidation (MEO) process is termed as hybrid mediated electrochemical oxidation. The electrochemical cell was developed in this laboratory. In the present study, several organic compounds, such as phenol, benzoquinone and ethylenediaminetetraacetic acid (EDTA), were chosen as the model organic pollutants to be destructed by the hybrid process. The organic destruction was monitored based on the CO2 generation and total organic carbon (TOC) reduction. The HMEO process was found to be extremely effective in the destruction of all the target organics chosen in this study. The information obtained from this study will provide an insight in adopting this technique for dealing with more recalcitrant organics (POPs).     

Supporting real-time and multimedia applications on the Mercuritestbed

This paper describes the distributed system, network and software architecture, the application development environment, the performance, and the early lessons learned on the ATM LAN testbed Mercuri established at the Honeywell Technology Center, to develop distributed multimedia technologies for real-time control applications. We have developed a client-server-based software architecture on Sun Sparcstation-2s connected by a Fore Systems' ASX-100 ATM switch, with video processing handled by Parallax's X Video cards. The architecture enables network-transparent applications and provides simple primitives for multimedia capture, display, transmission, storage, and retrieval. A real-time multimedia-in-the-loop control application was developed as the vehicle for testing the capabilities and performance of the network. Our test measurements focus on the end-user-level performance metrics such as message throughput and round-trip delay as well as video-frame jitter under no-load and load conditions. Our results show that the maximum burst throughput that can be supported at the user level is 48 Mb/s using AAL 5, while round-trip delays for 4-kbyte messages are about 3 ms. Our experience reveals a number of performance bottlenecks and open issues in using commercial ATM switches for practical applications. Our conclusions are outlined     

Anaerobic co-digestion of sludge with other organic wastes in small wastewater treatment plants: an economic considerations evaluation.

This paper deals with an economic comparison between costs and incomes in small wastewater treatment plants where the anaerobic co-digestion process of sludge and biowaste with energy recovery is operated. Plants in the size range 1,000-30,000 persons equivalent (pe) were considered in the study: typical costs, comprehensive of capital and operating costs, were in the range euro69-105 per person per year depending on the plant size: the smaller the size the higher the specific cost. The incomes deriving from taxes and fees for wastewater treatment are generally in the range euro36-54 per person per year and can only partially cover costs in small wastewater treatment plants. However, the co-treatment of biowaste and the use of produced energy for extra credits (green certificates) determine a clear improvement in the possible revenues from the plant. These were calculated to be euro23-25 per person per year; as a consequence the costs and incomes can be considered comparable for wastewater treatment plants (WWTPs) with size larger than 10,000 pe. Therefore, anaerobic co-digestion of biowaste and sludge can also be considered a sustainable solution for small wastewater treatment plants in rural areas where several different kinds of biowaste are available to enhance biogas production in anaerobic reactors.     

Characterization of poly(vinyl alcohol)/sodium bromide polymer electrolytes for electrochemical cell applications

Sodium‐ion conducting polymer electrolytes based on poly(vinyl alcohol) complexed with sodium bromide were prepared with a solution‐casting technique. The structure of these films was determined with X‐ray diffraction, and the complexation of the salt with the polymer was confirmed with Fourier transform infrared spectroscopy studies. Electrical conductivity was measured with an alternating‐current impedance analyzer in the frequency range of 100 Hz to 1 MHz and in the temperature range of 303–373 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. The nature of the charge transport in these polymer electrolyte films was determined with both Wagner's polarization technique and the Watanabe technique. The dominant conducting species were found to be ions, particularly anions. Optical absorption studies were performed in the wavelength range of 200–600 nm, and the absorption edge, direct band gap, and indirect band gap values were evaluated. Electrochemical cells were fabricated, and their discharge characteristics were studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Inverse Analysis of Impact Test Data: Experimental Study on Polymeric Materials Displaying Brittle Behaviour

This paper deals with the influence of the testing equipment on impact load measurements. A previously developed method of analysis and processing of the experimental data based on a refined analogical model of the impact event and inverse problem techniques is used. This method makes it possible to obtain the mechanical response of the material, notwithstanding the disturbance of the dynamic effects associated to the test. Results from tests carried out both on falling weight and swing pendulum instrumented testing machines are compared. It is shown that this method can give an accurate estimation of the actual bending force in impact testing independent of the testing equipment.     

MIL-100(Fe) Sub-Micrometric Capsules as a Dual Drug Delivery System

Nanoparticles of metal–organic frameworks (MOF NPs) are crystalline hybrid micro- or mesoporous nanomaterials that show great promise in biomedicine due to their significant drug loading ability and controlled release. Herein, we develop porous capsules from aggregate of nanoparticles of the iron carboxylate MIL-100(Fe) through a low-temperature spray-drying route. This enables the concomitant one-pot encapsulation of high loading of an antitumor drug, methotrexate, within the pores of the MOF NPs, and the collagenase enzyme (COL), inside the inter-particular mesoporous cavities, upon the formation of the capsule, enhancing tumor treatment. This association provides better control of the release of the active moieties, MTX and collagenase, in simulated body fluid conditions in comparison with the bare MOF NPs. In addition, the loaded MIL-100 capsules present, against the A-375 cancer cell line, selective toxicity nine times higher than for the normal HaCaT cells, suggesting that MTX@COL@MIL-100 capsules may have potential application in the selective treatment of cancer cells. We highlight that an appropriate level of collagenase activity remained after encapsulation using the spray dryer equipment. Therefore, this work describes a novel application of MOF-based capsules as a dual drug delivery system for cancer treatment.     

Adaptive epileptic seizure prediction system

Current epileptic seizure "prediction" algorithms are generally based on the knowledge of seizure occurring time and analyze the electroencephalogram (EEG) recordings retrospectively. It is then obvious that, although these analyses provide evidence of brain activity changes prior to epileptic seizures, they cannot be applied to develop implantable devices for diagnostic and therapeutic purposes. In this paper, we describe an adaptive procedure to prospectively analyze continuous, long-term EEG recordings when only the occurring time of the first seizure is known. The algorithm is based on the convergence and divergence of short-term maximum Lyapunov exponents (STLmax) among critical electrode sites selected adaptively. A warning of an impending seizure is then issued. Global optimization techniques are applied for selecting the critical groups of electrode sites. The adaptive seizure prediction algorithm (ASPA) was tested in continuous 0.76 to 5.84 days intracranial EEG recordings from a group of five patients with refractory temporal lobe epilepsy. A fixed parameter setting applied to all cases predicted 82% of seizures with a false prediction rate of 0.16/h. Seizure warnings occurred an average of 71.7 min before ictal onset. Similar results were produced by dividing the available EEG recordings into half training and testing portions. Optimizing the parameters for individual patients improved sensitivity (84% overall) and reduced false prediction rate (0.12/h overall). These results indicate that ASPA can be applied to implantable devices for diagnostic and therapeutic purposes.     

Characterization and Formation Mechanism of Six Pointed Star-Type Stacking Faults in 4H-SiC

Synchrotron white-beam x-ray topography (SWBXT) studies of defects in 100-mm-diameter 4H-SiC wafers grown using physical vapor transport are presented. SWBXT enables nondestructive examination of thick and large-diameter SiC wafers, and defects can be imaged directly. Analysis of the contrast from these defects enables determination of their configuration, which, in turn, provides insight into their possible formation mechanisms. Apart from the usual defects present in the wafers, including micropipes, threading edge dislocations, threading screw dislocations, and basal plane dislocations, a new stacking fault with a peculiar configuration attracts our interest. This fault has the shape of a six-pointed star, comprising faults with three different fault vectors of Shockley type. Transmission and grazing topography of the fault area are carried out, and detailed contrast analysis reveals that the outline of the star is confined by 30° Shockley partial dislocations. A micropipe, which became the source of dislocations on both the basal plane slip system and the prismatic slip system, is found to be associated with the formation of the star fault. The postulated mechanism involves the reaction of 60° dislocations of a/3 〈 $ \bar{2}110 $ 〉 Burgers vector on basal plane and pure screw dislocations of a/3 〈 $ 11\bar{2}0 $ 〉 Burgers vector on prismatic plane and cross slip of the partial dislocation from prismatic plane to basal plane leading to expansion of the faults.     

Prediction of impact-ionization-induced snap-back in advanced Sin-p-n BJT's by means of a nonlocal analytical model for the avalanchemultiplication factor

The authors point out that when a triangular shape for the electric field in the base-collector space-charge region of an n-p-n Si BJT (bipolar junction transistor) is assumed, the electron mean energy can be calculated analytically from a simplified energy-balance equation. On this basis a nonlocal-impact-ionization model, suitable for computer-aided circuit simulation, has been obtained and used to calculate the output characteristics at constant emitter-base voltage (grounded base) of advanced devices. Provided the experimental bias-dependent value of the base parasitic resistance is accounted for in the device model, the base-collector voltage at which impact-ionization-induced snap-back occurs can be accurately predicted     

Fundamental Limitations of Continuous-Time Delta–Sigma Modulators Due to Clock Jitter

We examine noise due to clock jitter in single-loop low-pass continuous-time delta-sigma (Delta Sigma) modulators (CT-DSMs) employing nonreturn to zero (NRZ) feedback digital-to-analog converters (DACs). Using the discrete-time version of the Bode sensitivity integral, we derive a lower bound on jitter noise and its relationship to the noise transfer function (NTF) of the modulator. We show that NTFs with optimized zeros result in lower jitter noise than those with all zeros at the origin. We give intuition to a recent observation (arrived through numerical optimization) that NTFs with peaking in their passbands have lower jitter noise than maximally flat NTFs. We propose a design procedure that minimizes the sum of the quantization and jitter noise. The arguments regarding Delta Sigma analog-to-digital converters are extended to Delta Sigma DACs and measurement results are presented.