Nonisothermal melt-crystallization kinetics of isotactic polypropylene synthesized with a metallocene catalyst and compounded with different quantities of an α nucleator

The nonisothermal crystallization kinetics of a metallocene-made isotactic polypropylene (m-iPP) and its compounds with 0.1 wt % and 0.3 wt % of a sorbitol derivative [1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS); an α nucleator] were investigated by differential scanning calorimetry at different cooling rates from the melt. The nucleation efficiency was proved by a significant increase in the crystallization temperatures (accompanied by a slight augmentation of the degree of crystallinity and a decrease in the crystal sizes). This increase in the crystallization temperatures led to higher amounts of fractional content in the γ polymorph, even though DMDBS was supposed to be a nucleator for the α form. The Avrami and Ozawa methods effectively described only the early stage of crystallization, whereas a combined Avrami–Ozawa method was valid for the whole crystallization process. The values of the exponent for this method decreased for nucleated samples in the later stage of crystallization, especially in the case of m-iPP with 0.3 wt % DMDBS added (m-iPP03). The activation energy of the process and the surface free energy were also estimated. The production of considerable proportions of the γ polymorph in m-iPP03 corresponded to higher values of the activation energy and lower values of the surface free energy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Using AVAL-1D to simulate avalanches in the eastern Pyrenees

The two friction parameters used in the numerical avalanche dynamics program AVAL-1D, were calibrated empirically with data from observed avalanches in the Swiss Alps. The implementation of the model with these friction parameters in other regions with different characteristics can lead to considerable uncertainty if a previous calibration is not performed. However, direct calibration for a specific avalanche path is often not possible since the data available are insufficient. Therefore, we back-calculated twelve well-documented avalanche events from the Catalan Pyrenees to calibrate the friction coefficients to be used in this mountain range. The result of the study reveals that there is a good fit between recorded and simulated avalanche events using the friction parameters originally calibrated for the Swiss Alps, despite the difference in snow climate between these two mountain ranges.     

Conductive-probe atomic force microscopy characterization of silicon nanowire

The electrical conduction properties of lateral and vertical silicon nanowires (SiNWs) were investigated using a conductive-probe atomic force microscopy (AFM). Horizontal SiNWs, which were synthesized by the in-plane solid-liquid-solid technique, are randomly deployed into an undoped hydrogenated amorphous silicon layer. Local current mapping shows that the wires have internal microstructures. The local current-voltage measurements on these horizontal wires reveal a power law behavior indicating several transport regimes based on space-charge limited conduction which can be assisted by traps in the high-bias regime (> 1 V). Vertical phosphorus-doped SiNWs were grown by chemical vapor deposition using a gold catalyst-driving vapor-liquid-solid process on higly n-type silicon substrates. The effect of phosphorus doping on the local contact resistance between the AFM tip and the SiNW was put in evidence, and the SiNWs resistivity was estimated.     

Fe–Nx/C electrocatalysts synthesized by pyrolysis of Fe(II)–2,3,5,6-tetra(2-pyridyl)pyrazine complex for PEM fuel cell oxygen reduction reaction

2,3,5,6-Tetra(2-pyridyl)pyrazine (TPPZ) was employed as a ligand to prepare an iron(II) complex (Fe–TPPZ) that served as a precursor to synthesize carbon-supported catalysts (Fe–N_x/C) through heat-treatment at 600, 700, 800 and 900 °C under N₂ atmosphere. Both the structure and composition of the synthesized Fe–N_x/C were analyzed by X-ray diffraction and energy-dispersive X-ray microanalysis, respectively. The rotating disk and ring-disk electrode measurements showed that these catalysts have strong ORR activity with an overall 4-electron transfer process through a (2 + 2)-electron transfer mechanism, which was assigned to the catalytic function of the Fe–N_x center. A study on the heat-treatment temperature on the ORR activity showed that 800 °C is the optimal temperature for the synthesized catalysts. Furthermore, the effect of both catalyst and Nafion^® ionomer loadings in the catalyst layer on the corresponding ORR activity was also investigated. The kinetic parameters such as the chemical reaction rate between O₂ and Fe–N_x/C (adduct formation reaction), the rate constant for the rate-determining step (RDS), and the electron numbers in the ORR, were obtained. The methanol tolerance of the catalyst was also tested. To validate the ORR activity, a membrane electrode assembly in which the cathode catalyst layer contained Fe–N_x/C was constructed and tested in a real fuel cell. The results obtained are encouraging when compared with similar non-noble catalysts.     

TP53-Induced Glycolysis and Apoptosis Regulator (TIGAR) Is Upregulated in Lymphocytes Stimulated with Concanavalin A

The glycolytic modulator TP53-Inducible Glycolysis and Apoptosis Regulator (TIGAR) is overexpressed in several types of cancer and has a role in metabolic rewiring during tumor development. However, little is known about the role of this enzyme in proliferative tissues under physiological conditions. In the current work, we analysed the role of TIGAR in primary human lymphocytes stimulated with the mitotic agent Concanavalin A (ConA). We found that TIGAR expression was induced in stimulated lymphocytes through the PI3K/AKT pathway, since Akti-1/2 and LY294002 inhibitors prevented the upregulation of TIGAR in response to ConA. In addition, suppression of TIGAR expression by siRNA decreased the levels of the proliferative marker PCNA and increased cellular ROS levels. In this model, TIGAR was found to support the activity of glucose 6-phosphate dehydrogenase (G6PDH), the first enzyme of the pentose phosphate pathway (PPP), since the inhibition of TIGAR reduced G6PDH activity and increased autophagy. In conclusion, we demonstrate here that TIGAR is upregulated in stimulated human lymphocytes through the PI3K/AKT signaling pathway, which contributes to the redirection of the carbon flux to the PPP.     

Optogenetics Comes of Age: Novel Inhibitory Light‐Gated Anionic Channels Allow Efficient Silencing of Neural Function

Optogenetics, the developing field of research that uses light‐switchable biochemical tools in a sophisticated technological approach to monitor or control neural function, is rapidly evolving with the discovery and development of novel microbial rhodopsins. Light‐absorbing membrane proteins, as tools for brain research, are promoting new applications within the discipline of optogenetics. Light‐gated rhodopsin ion channels with better intrinsic light sensitivity and improved resolution are needed to overcome some of the current limitations of existing molecules. The recent discovery of light‐gated inhibitory anion channels opens new opportunities for studying physiological neural processes and, at the same time, represent a powerful approach for elucidating the mechanisms of neurological and mental disorders that could benefit from this approach.     

Absorbing photonic crystals for silicon thin-film solar cells: Design,fabrication and experimental investigation

In this paper, we present the integration of an absorbing photonic crystal within a thin-film photovoltaic solar cell. Optical simulations performed on a complete solar cell revealed that patterning the hydrogenated amorphous silicon active layer as a 2D photonic crystal membrane enabled to increase its integrated absorption by 28 % between 300 and 720 nm, comparing to a similar but unpatterned stack. In order to fabricate such promising cells, we developed a high throughput process based on holographic lithography and reactive ion etching. The influences of the parameters taking part in those processes on the obtained patterns are discussed. Optical measurements performed on the resulting “photonized” solar cell structures underline the regularity of the 2D pattern and a significant absorption increase above 550 nm, similarly to what is observed on the simulated absorption spectra. Moreover, our patterned cells are found to be robust with regards to the angle of incidence of the light.     

The Utility of Land-Surface Model Simulations to Provide Drought Information in a Water Management Context Using Global and Local Forcing Datasets

Drought diagnosis and forecasting are fundamental issues regarding hydrological management in Spain, where recurrent water scarcity periods are normal. Land-surface models (LSMs) could provide relevant information for water managers on how drought conditions evolve. Here, we explore the usefulness of LSMs driven by atmospheric analyses with different resolutions and accuracies in simulating drought and its propagation to precipitation, soil moisture and streamflow through the system. We perform simulations for the 1980-2014 period with SASER (5 km resolution) and LEAFHYDRO (2.5 km resolution), which are forced by the Spanish SAFRAN dataset (at 5km and 30km resolutions), and the global eartH2Observe datasets at 0.25 degrees (including the MSWEP precipitation dataset). We produce standardized indices for precipitation (SPI), soil moisture (SSMI) and streamflow (SSI). The results show that the model structure uncertainty remains an important issue in current generation large-scale hydrological simulations based on LSMs. This is true for both the SSMI and SSI. The differences between the simulated SSMI and SSI are large, and the propagation scales for drought regarding both soil moisture and streamflow are overly dependent on the model structure. Forcing datasets have an impact on the uncertainty of the results but, in general, this impact is not as large as the uncertainty due to model formulation. Concerning the global products, the precipitation product that includes satellite observations (MSWEP) represents a large improvement compared with the product that does not.