Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.     

A reverse osmosis desalting plant operated by gas turbines

Power plants in Kuwait use gas turbines (GT) only for a few hours to produce power at peak load times. Peak loadoccurs in the summer due to the air-conditioning load. As an example, the average number of operating hours for six gas turbines in the Doha East power plant was 16 in the summer of 2001. There is little concern about efficiency of these GT since they work for a very short time during the year. However, a recent increase in desalted seawater demand suggests the use of these GT to operate reverse osmosis (RO) desalting systems all year around. The summer outside design temperature in Kuwait for air-conditioning calculations is 48°C dry bulb temperature (DBT), and 28°C wet bulb temperature (WBT); but the ambient temperature can easily reach 60°C. Gas turbine power output and efficiency are drastically reduced by the increase in temperature of intake air to the gas turbine's compressor, especially during harsh Kuwaiti summer conditions. Thus, it is essential to investigate cooling of air intake to the GT compressor. The performance of a typical GT unit and its ability to produce desalted waterby a RO desalting system at different ambient temperatures are presented. Calculation of needed capacities for the cooling of intake air to the GT compressor was performed for evaporative cooling, single and multiple mechanical vapor compression cycles, and combined indirect evaporation cooling with the refrigeration system. The improvements of power output and efficiency due to the cooling of air intake of the GT and the resulting increase in desalted water are also presented.     

The MORPHEUS Heterogeneous Dynamically Reconfigurable Platform

Reconfigurable computing offers a wide range of low cost and efficient solutions for embedded systems. The proper choice of the reconfigurable device, the granularity of its processing elements and its memory architecture highly depend on the type of application and their data flow. Existing solutions either offer fine grain FPGAs, which rely on a hardware synthesis flow and offer the maximum degree of flexibility, or coarser grain solutions, which are usually more suitable for a particular type of data flow and applications. In this paper, we present the MORPHEUS architecture, a versatile reconfigurable heterogeneous System-on-Chip targeting streaming applications. The presented architecture exploits different reconfigurable technologies at several computation granularities that efficiently address the different applications needs. In order to efficiently exploit the presented architecture, we implemented a complete software solution to map C applications to the reconfigurable architecture. In this paper, we describe the complete toolset and provide concrete use cases of the architecture.     

Tolerance to transient faults in microprogrammed control units

The detection of and recovery from transient faults that cause errors in microprogrammed control units are addressed. Error detection is based upon a particular form of signature analysis, namely the run-time computation of a value (the signature) that depends strictly on the microprogram path (the sequence) under execution. The microprogram is statistically segmented (sequences are defined in a fixed way, at design time), and an anticipated signature is associated with each sequence. At run time, at the start of each sequence the computation of the signature is restarted, whereas at the end the computed signature is compared with the anticipated signature of the sequence. If the check is passed, the status of the control unit is saved in suitable registers, and the previously saved status is discarded. If the check fails, the last-saved status is restored (rolled back) and microprogram execution restarts from this last-saved point     

Enhancement of Return Routability Mechanism for Optimized‐NEMO Using Correspondent Firewall

Network Mobility (NEMO) handles mobility of multiple nodes in an aggregate manner as a mobile network. The standard NEMO suffers from a number of limitations, such as inefficient routing and increased handoff latency. Most previous studies attempting to solve such problems have imposed an extra signaling load and/or modified the functionalities of the main entities. In this paper, we propose a more secure and lightweight route optimization (RO) mechanism based on exploiting the firewall in performing the RO services on behalf of the correspondent nodes (CNs). The proposed mechanism provides secure communications by making an authorized decision about the mobile router (MR) home of address, MR care of address, and the complete mobile network prefixes underneath the MR. In addition, it reduces the total signaling required for NEMO handoffs, especially when the number of mobile network nodes and/or CNs is increased. Moreover, our proposed mechanism can be easily deployed without modifying the mobility protocol stack of CNs. A thorough analytical model and network simulator (Ns‐2) are used for evaluating the performance of the proposed mechanism compared with NEMO basic support protocol and state‐of‐the‐art RO schemes. Numerical and simulation results demonstrate that our proposed mechanism outperforms other RO schemes in terms of handoff latency and total signaling load on wired and wireless links.     

Performance evaluation of OFDM and single‐carrier systems using frequency domain equalization and phase modulation

In this paper, we study the performance of the continuous phase modulation (CPM)‐based orthogonal frequency division multiplexing (CPM‐OFDM) system. Also, we propose a CPM‐based single‐carrier frequency domain equalization (CPM‐SC‐FDE) structure for broadband wireless communication systems. The proposed structure combines the advantages of the low complexity of SC‐FDE, in addition to exploiting the channel frequency diversity and the power efficiency of CPM. Both the CPM‐OFDM system and the proposed system are implemented with FDE to avoid the complexity of the equalization. Two types of frequency domain equalizers are considered and compared for performance evaluation of both systems; the zero forcing (ZF) equalizer and the minimum mean square error (MMSE) equalizer. Simulation experiments are performed for a variety of multipath fading channels. Simulation results show that the performance of the CPM‐based systems with multipath fading is better than their performance with single path fading. The performance over a multipath channel is at least 5 and 12 dB better than the performance over a single path channel, for the CPM‐OFDM system and the proposed CPM‐SC‐FDE system, respectively. The results also show that, when CPM is utilized in SC‐FDE systems, they can outperform CPM‐OFDM systems by about 5 dB. Copyright © 2010 John Wiley & Sons, Ltd.     

Rigorous Full-Wave Analysis of Rectangular Microstrip Patch Antenna on Suspended and Composite Substrates

In this paper, Galerkin’s method in the Fourier transform domain is applied to the determination of the resonant frequencies and half-power bandwidth of rectangular microstrip patch on composite and suspended substrates. Using Galerkin’s method in solving the integral equation numerically, the complex resonant frequency of the microstrip antenna on suspended and composite substrates is studied with sinusoidal functions as basis functions, which show fast numerical convergence. The validity of the solution is tested by comparison of the computed results with experimental data. Finally, numerical results for the effects of suspended and composite substrates on the resonant frequency and half-power bandwidth are also presented.