An integrated modeling approach to predict flooding on urban basin.

Correct prediction of flood extents in urban catchments has become a challenging issue. The traditional urban drainage models that consider only the sewerage-network are able to simulate the drainage system correctly until there is no overflow from the network inlet or manhole. When such overflows exist due to insufficient drainage capacity of downstream pipes or channels, it becomes difficult to reproduce the actual flood extents using these traditional one-phase simulation techniques. On the other hand, the traditional 2D models that simulate the surface flooding resulting from rainfall and/or levee break do not consider the sewerage network. As a result, the correct flooding situation is rarely addressed from those available traditional 1D and 2D models. This paper presents an integrated model that simultaneously simulates the sewerage network, river network and 2D mesh network to get correct flood extents. The model has been successfully applied into the Tenpaku basin (Nagoya, Japan), which experienced severe flooding with a maximum flood depth more than 1.5 m on September 11, 2000 when heavy rainfall, 580 mm in 28 hrs (return period > 100 yr), occurred over the catchments. Close agreements between the simulated flood depths and observed data ensure that the present integrated modeling approach is able to reproduce the urban flooding situation accurately, which rarely can be obtained through the traditional 1D and 2D modeling approaches.     

Graft polymerization of some vinyl monomers onto acrylic rubber. II. Mechanical properties of graft polymers

Some mechanical properties of styrene and acrylonitrile copolymers grafted onto acrylic rubber are investigated. The impact strength of graft polymers depended upon the nature and the concentration of the catalyst, the composition and the intrinsic viscosity of the rubber, and the acrylonitrile content in the rigid matrix. The most desirable result was obtained when benzoyl peroxide as the catalyst, n-butyl acrylate–acrylonitrile copolymer of 7–10% acrylonitrile content, and about 0–5% acrylonitrile in the rigid matrix were used. Dynamic mechanical tests show the increase in efficiency of rubber modification by the grafted chains. The better weathering resistance of these graft polymers, as compared with commercial ABS plastics, was confirmed.     

Unkeito Suppresses RANKL-Mediated Osteoclastogenesis via the Blimp1–Bcl6 and NF-κB Signaling Pathways and Enhancing Osteoclast Apoptosis

Osteoporosis is a common bone disease, particularly in menopausal women. Herein, we screened four Kampo medicines (Unkeito (UKT), Kamishoyosan (KSS), Kamikihito (KKT), and Ninjinyoeito (NYT)), frequently used to treat menopausal syndromes, for their effects on receptor activator of nuclear factor-kappaB ligand (RANKL)-induced osteoclast differentiation in RAW 264 cells. Considering that UKT exhibited the most potent effect, we examined its effect on RANKL-induced osteoclastogenesis, the induction of osteoclast apoptosis, and the mechanisms underlying its effects. UKT inhibits RANKL-induced osteoclast differentiation in the early stage and decreases osteoclast-related genes, including tartrate-resistant acid phosphatase (Trap), dendritic cell-specific transmembrane protein (Dcstamp), matrix metalloproteinase-9 (Mmp9), and cathepsin K (Ctsk). Specifically, UKT inhibits the nuclear factor of activated T cells 1 (NFATc1), which is essential for osteoclastogenesis. UKT increases Bcl6, which antagonizes NFATc1 and Dc-stamp, thereby blocking the progression of osteoclasts to maturation. UKT also decreased nuclear translocation by downregulating the activity of p65/NF-κB. In addition, UKT enhances mononuclear osteoclast apoptosis via activation of caspase-3. Herein, we demonstrate that UKT suppresses RANKL-mediated osteoclastogenesis via the Blimp1–Bcl6 and NF-κB signaling pathways and enhances mononuclear osteoclast apoptosis. Furthermore, UKT prevents bone loss in OVX mice. Thus, UKT might be a potential therapeutic agent for postmenopausal osteoporosis.     

Dirac Cone Spin Polarization of Graphene by Magnetic Insulator Proximity Effect Probed with Outermost Surface Spin Spectroscopy

The effects of the proximity contact with magnetic insulator on the spin‐dependent electronic structure of graphene are explored for the heterostructure of single‐layer graphene (SLG) and yttrium iron garnet Y₃Fe₅O₁₂ (YIG) by means of outermost surface spin spectroscopy using a spin‐polarized metastable He atom beam. In the SLG/YIG heterostructure, the Dirac cone electrons of graphene are found to be negatively spin polarized in parallel to the minority spins of YIG with a large polarization degree, without giving rise to significant changes in the π band structure. Theoretical calculations reveal the electrostatic interfacial interactions providing a strong physical adhesion and the indirect exchange interaction causing the spin polarization of SLG at the interface with YIG. The Hall device of the SLG/YIG heterostructure exhibits a nonlinear Hall resistance attributable to the anomalous Hall effect, implying the extrinsic spin–orbit interactions as another manifestation of the proximity effect.     

Microstructure Development and Dielectric Properties of Potassium Strontium Niobate Ceramics

Sintering of a KSr₂Nb₅O₁₅ powder compact at 1350°C resulted in a duplex structure. Prefiring of the compact between 1200° and 1300°C inhibited the abnormal grain growth responsible for the duplex structure. The Curie temperature and dielectric constant were dependent on the microstructure.     

A Fast and Accurate Method of Redesigning Analog Subcircuits for Technology Scaling

In this paper, we present an efficient approach for technology scaling of MOS analog circuits by using circuit optimization techniques. Our new method is based on matching equivalent circuit parameters between a previously designed circuit and the circuit undergoing redesign. This method has been applied to a MOS operational amplifier. We were able to produce a redesigned circuit with almost the same performance in under 4 h, making this method 5 times more efficient than conventional methods.     

Partial scan design and test sequence generation based on reduced scan shift method

This paper presents a partial scan algorithm, calledPARES (PartialscanAlgorithm based onREduced Scan shift), for designing partial scan circuits. PARES is based on the reduced scan shift that has been previously proposed for generating short test sequences for full scan circuits. In the reduced scan shift method, one determines proch FFs must be controlled and observed for each test vector. According to the results of similar analysis, PARES selects these FFs that must be controlled or observed for a large number of test vectors, as scanned FFs. Short test sequences are generated by reducing scan shift operations using a static test compaction method. To minimize the loss of fault coverage, the order of test vectors is so determined that the unscanned FFs are in the state required by the next test vector. If there are any faults undetected yet by a test sequence derived from the test vectors, then PARES uses a sequential circuit test generator to detect the faults. Experimental results for ISCAS'89 benchmark circuits are given to demonstrate the effectiveness of PARES.     

Removal of Interlayer Water of two Ti3C2Tx MXenes as a Versatile Tool for Controlling the Fermi-Level Pinning-Free Schottky Diodes with Nb:SrTiO3

Striving for the sixth-generation communication technology discovery, semiconductors beyond Si with wider bandgaps as well as non-conventional metals are actively being sought to achieve high speeds whilst maintaining devices miniaturization. 2D materials may provide the potential for downsizing, but their functional advantage over existing counterparts still longs to be discovered. Along that path, surface-adsorbed or bulk-intercalated water molecules remaining after wet-chemical synthesis of 2D materials are generally seen as obstacles to high-performance achievement. Herein, the control of such water within the interlayers of solution-processed metallic 2D titanium carbide (MXene) by vacuum annealing duration is demonstrated. Moreover, the impact of water removal on work function (WF) and functional terminations is unveiled for the first time. Furthermore, the usefulness of such water for controlling a novel Schottky diode in contact with an n-type oxide semiconductor, niobium-doped strontium titanate (Nb:SrTiO₃) is observed. The advantage of MXene compared to conventional gold as facile processing, WF tunability, and lower turn-on voltage in the Schottky anode application is highlighted. This fundamental study shows the way for a novel Schottky diode preparation in atmospheric conditions and provides implications for further research directions aiming at commercialization.     

Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.