Erosion-corrosion behavior of SiC particle-reinforced Al-Si alloy in NaOH slurry

The erosion-corrsosion behavior of SiC particle-reinforced Al-Si alloy has been studied in NaOH slurry simulating the mining atmosphere. The study was performed at two different sand concentrations, namely, 20 and 30 wt pct, and at a speed of 900 rpm. It is depicted that the wear rates decreased with increasing sand content, indicating that corrosion is the dominating mode of material removal. Further composite exhibited lower wear resistance than the laloys irrespective of the sand concentration. Scanning electron microscope (SEM) observations indicated the dissolution of dendrites of Al due to severe corrosion, leaving behind the network of Si. This ultimately results in the falling of Si particles from the matrix, leaving behind voids. This also results in the formation of voids around the SiC particles and leads to pullout of SiC particles from the matrix during the wear process.     

Plasmon‐Induced Hot Carrier Separation across Dual Interface in Gold–Nickel Phosphide Heterojunction for Photocatalytic Water Splitting

Precise control of the topology of metal nanocrystals and appropriate modulation of the metal–semiconductor heterostructure is an important way to understand the relationship between structure and material properties for plasmon‐induced solar‐to‐chemical energy conversion. Here, a bottom‐up wet chemical approach to synthesize Au/Ni₂P heterostructures via Pt‐catalyzed quasi‐epitaxial overgrowth of Ni on Au nanorods (NR) is presented. The structural motif of the Ni₂P is controlled using the aspect ratio of the Au NR and the effective micelle concentration of the C₁₆TAB capping agent. Highly ordered Au/Pt/Ni₂P nanostructures are employed as the photoelectrocatalytic anode system for water splitting. Electrochemical and ultrafast absorption spectroscopy characterization indicates that the structural motif of the Ni₂P (controlled by the outer‐shell deposition of Ni) helps to manipulate hot electron transfer during surface plasmon decay. With optimized Ni₂P thickness, Pt‐tipped Au NR with an aspect ratio of 5.2 exhibits a geometric current density of 10 mA cm^?2 with an overpotential of 140 mV. The photoanode displays unprecedented long‐term stability with continuous chronoamperometric performance of 50 h at an input potential of 1.5 V with over 30 days. This work provides definitive guidance for designing plasmonic–catalytic nanomaterials for enhanced solar‐to‐chemical energy conversion.     

Transition‐Metal Dichalcogenide NiTe2: An Ambient‐Stable Material for Catalysis and Nanoelectronics

By means of theory and experiments, the application capability of nickel ditelluride (NiTe₂) transition‐metal dichalcogenide in catalysis and nanoelectronics is assessed. The Te surface termination forms a TeO₂ skin in an oxygen environment. In ambient atmosphere, passivation is achieved in less than 30 min with the TeO₂ skin having a thickness of about 7 Å. NiTe₂ shows outstanding tolerance to CO exposure and stability in water environment, with subsequent good performance in both hydrogen and oxygen evolution reactions. NiTe₂‐based devices consistently demonstrate superb ambient stability over a timescale as long as one month. Specifically, NiTe₂ has been implemented in a device that exhibits both superior performance and environmental stability at frequencies above 40 GHz, with possible applications as a receiver beyond the cutoff frequency of a nanotransistor.     

Comparative Study on the Properties of Galvanically Deposited Nano- and Microcrystalline Thin Films of PbSe

Thin films of PbSe having both nano- and microstructures have been deposited on transparent conducting oxide (TCO)-coated glass substrates electrochemically, from an aqueous solution of Pb(OAc)₂, ethylenediamine tetraacetic acid (EDTA), and SeO₂. A Pb strip acted as the sacrificial anode, while the TCO glass was the cathode. No external bias was applied. The formation of PbSe was pH sensitive, and pH ~3 was found to be optimum for film deposition. Films grown at room temperature (25°C) were nanocrystalline (~25 nm), while those deposited at 80°C were microcrystalline (~150 nm). Films were characterized by x-ray diffraction studies, field-emission scanning electron microscope image analysis, infrared spectral analysis, and by both alternating-current (a.c.) and direct-current (d.c.) electrical measurements. A blue-shift was observed for the nanocrystalline films. Film resistivity and junction properties were obtained from electrical measurements.     

Channel Adaptive Quantization for Limited Feedback MIMO Beamforming Systems

Multiple-input multiple-output (MIMO) wireless systems can achieve significant diversity and array gain by using transmit beamforming and receive combining techniques. In the absence of full channel knowledge at the transmitter, the transmit beamforming vector can be quantized at the receiver and sent to the transmitter using a low-rate feedback channel. In the literature, quantization algorithms for the beamforming vector are designed and optimized for a particular channel distribution, commonly the uncorrelated Rayleigh distribution. When the channel is not uncorrelated Rayleigh, however, these quantization strategies result in a degradation of the receive signal-to-noise ratio (SNR). In this paper, switched codebook quantization is proposed where the codebook is dynamically chosen based on the channel distribution. The codebook adaptation enables the quantization to exploit the spatial and temporal correlation inherent in the channel. The convergence properties of the codebook selection algorithm are studied assuming a block-stationary model for the channel. In the case of a nonstationary channel, it is shown using simulations that the selected codebook tracks the distribution of the channel resulting in improvements in SNR. Simulation results show that in the case of correlated channels, the SNR performance of the link can be significantly improved by adaptation, compared with nonadaptive quantization strategies designed for uncorrelated Rayleigh-fading channels     

MESFET MMIC Ka-band transmitter performance forhigh-volume system applications

An MMIC transmitter for high-volume smart munition applications in Ka band is developed using 0.25 μm MESFET technology. The transmitter, consisting of a voltage-controlled oscillator (VCO) and power amplifier (PA), delivers more than 100 mW of power with an overall efficiency of 10% and a linear tuning range of more than 700 MHz around 35 GHz     

Distributed topology management for wireless multimedia sensor networks: exploiting connectivity and cooperation

In this paper, we propose a distributed topology management algorithm, named T‐Must, which orchestrates coalition formation game between camera and scalar sensor (SS) nodes, for use in wireless multimedia sensor networks. In the proposed solution, connectivity among the peer camera sensor (CS) nodes is maintained, and coverage is ensured between them. Only the scalar data are not sufficient to describe an event in a particular monitored area. In many cases, multimedia data (specifically, video data) are required to provide more precise information about the event. As the CS nodes, which sense and transmit multimedia data, are costlier than the SS nodes, the former are deployed in the monitored area in lesser numbers compared to the latter ones. In case of CS nodes, power consumption due to sensing is also significant, similar to power consumption for the transmission and reception of packets. Therefore, in this work, in order to increase the network lifetime, topology is controlled by forming coalition between the CS and SS nodes. Upon occurrence of an event, the SS nodes send scalar data to their associated CS nodes. If the scalar data received from SS nodes cross a preconfigured threshold, the associated CS node in the coalition starts sensing the event, captures the video data, and forwards the video data toward other coalitions or sink. Copyright © 2014 John Wiley & Sons, Ltd.     

Carbazole and benzimidazole/oxadiazole hybrids as bipolar host materials for sky blue,green, and red PhOLEDs

Two novel bipolar host materials (CBzIm and COxaPh) comprising of a hole-transport (HT) carbazole core functionalized with electron-transport (ET) moieties (benzimidazole/oxadiazole) at C3 and C6 positions have been synthesized. Their thermal, photophysical, electrochemical properties, and carrier mobilities were characterized. Theoretical calculations revealed that the HOMO orbitals were generally delocalized over the hole- and electron-transport moieties for both CBzIm and COxaPh, whereas the LUMO orbitals distribution only involved one benzimidazole moiety in CBzIm instead of fully delocalization over the whole polar moieties for COxaPh, which is consistent with the observation of good hole mobilities for both hosts and better electron mobility for COxaPh over CBzIm. CBzIm with high E_T (2.76 eV) is suitable to serve as a blue phosphor host, where a sky blue phosphor (DFPPM)₂Irpic exhibiting superior properties than those of popular blue emitter FIrpic was used to give highly efficient phosphorescent OLEDs, achieving a maximum external quantum efficiency (η_ext) of 15.7%. The better π-delocalization of COxaPh led to a lower triplet energy (E_T = 2.65 eV), which can be used to accommodate green and red phosphors, providing excellent device performance with η_ext as high as 17.7% for green [(ppy)₂Ir(acac)] and 20.6% for red [Os(bpftz)₂(PPh₂Me)₂], respectively.     

Preprogramming Floating Time of Liquid Marble

Non-sticking droplets wrapped with fine hydrophobic particles, namely liquid marbles, can be transported both on solid and water pool without an undesired spill of the inner encapsulated liquid. While the stimuli-responsive release of the inner liquid in the target area is proposed, the time-programmed release is not yet achieved. Herein, the hydrophobicity of nanoclay is modulated via a catalyst-free 1,4-conjugate addition reaction to form liquid marbles. This nanoclay liquid marble is robust and stable in air but collapses on the liquid pool with a specific lifetime. The lifetime of the liquid marble can be modulated over seconds to hours scale depending on the selection of chemically modulated wettability of the nanoclay. The critical mechanism of lifetime modulation is responsible for controlling the coalescence kinetics between the water pool and inner liquid by nanoclays’ high diffusion length and chemically varied water spreading potential. The NC liquid marble's programmable lifetime to ‘time-bomb’ type drug release and cascade chemical reaction is applied—without requiring any external intervention.     

Fluorene‐Based Asymmetric Bipolar Universal Hosts for White Organic Light Emitting Devices

Two new bipolar host molecules composed of hole‐transporting carbazole and electron‐transporting cyano ( CzFCN ) or oxadiazole ( CzFOxa )‐substituted fluorenes are synthesized and characterized. The non‐conjugated connections, via an sp³‐hybridized carbon, effectively block the electronic interactions between electron‐donating and ‐accepting moieties, giving CzFCN and CzFOxa bipolar charge transport features with balanced mobilities (10^?5 to 10^?6 cm² V^?1 s^?1). The meta–meta configuration of the fluorene‐based acceptors allows the bipolar hosts to retain relatively high triplet energies [E_T = 2.70 eV ( CzFOxa ) and 2. 86 eV ( CzFCN )], which are sufficiently high for hosting blue phosphor. Using a common device structure – ITO/PEDOT:PSS/DTAF/TCTA/host:10% dopants (from blue to red)/DPPS/LiF/Al – highly efficient electrophosphorescent devices are successfully achieved. CzFCN ‐based devices demonstrate better performance characteristics, with maximum η_ext of 15.1%, 17.9%, 17.4%, 18%, and 20% for blue (FIrpic), green [(PPy)₂Ir(acac)], yellowish‐green [m‐(Tpm)₂Ir(acac)], yellow [(Bt)₂Ir(acac)], and red [Os(bpftz)₂(PPhMe₂)₂, OS1], respectively. In addition, combining yellowish‐green m‐(Tpm)₂Ir(acac) with a blue emitter (FIrpic) and a red emitter (OS1) within a single emitting layer hosted by bipolar CzFCN , three‐color electrophosphorescent WOLEDs with high efficiencies (17.3%, 33.4 cd A^?1, 30 lm W ^?1), high color stability, and high color‐rendering index (CRI) of 89.7 can also be realized.