An Example of Human-Centric Sensor Network: Be Responsible Platform

The paper addresses the Be Responsible platform, a representative example of human-centric sensing network which, relying on the Info-Communication and Internet of Things concepts, aims to improve the communication between citizens, on one side, and government authorities, on the other side, with the purpose of resolving various problems encountered in a modern society. A widespread network of human-centric smartphone devices and PCs has been used as a valuable source of data collected and processed in order to trigger adequate actions upon problem resolving. In this way, humans acting as sensor operators and data sources become a powerful factor in improving their society. The Be Responsible platform enables the people to report the irregularities in various aspects of their social life (grey economy, misuse of government vehicles, ecology, traffic), and hence to take active part in resolving them. It also promotes positive and responsible social and institutional behavior, which has to be nurtured in any society seeking progress. The number of submitted reports as well as the money collected from the fine revenues and subsequently invested in projects of social good, undoubtedly prove that what could not be achieved through years of traditional government-led policy approach, was achieved in months of citizen engagement.     

A multimodal hand-based verification system with an aliveness-detection module

This paper presents a multimodal biometrie verification system based on the following hand features: palmprint, four digitprints and four fingerprints. The features are obtained using the Karhunen-Loève transform based approach, and information fusion at the matching-score level was applied. We experimented with different resolutions of the regions of interest, different numbers of features and several normalization and fusion techniques at the matching-score level. To increase the reliability of the system to spoof attacks we included an aliveness-detection module based on thermal images of the hand dor sa. The verification performance when using a system configuration with optimum parameters, i.e., resolution, number of features, normalization and fusion technique, showed an equal error rate (EER) of 0.0020%, which makes the system appropriate for the implementation of high-security biometric systems.     

A parametric method for non-stationary interference suppression in direct sequence spread-spectrum systems

The problem of non-stationary interference suppression in direct sequence spread-spectrum (DS-SS) systems is considered. The phase of interference is approximated by a polynomial within the considered interval. According to the local polynomial Fourier transform (LPFT) principle, the received signal is dechirped by using the obtained phase approximation and the interference is, in turn, suppressed by excising the corrupted low-pass frequency band. For the estimation of polynomial coefficients, we use the product high-order ambiguity function (PHAF), known for its capability to successfully resolve components of a multicomponent polynomial-phase signal (PPS). The proposed method can suppress interferences with both polynomial and non-polynomial phase. In addition, it can suppress both monocomponent and multicomponent interferences. The simulations show that the proposed method outperforms time-frequency (TF) methods, that successfully deal with multicomponent interferences, in terms of the error probability and computational complexity.     

Composition of the Defensive Secretion in Three Species of European Millipedes

Three European julid species, Cylindroiulus boleti, Leptoiulus trilineatus, and Megaphyllum bosniense, secrete mixtures of up to 12 different quinones. The major components in these species are 2-methoxy-3-methyl-1,4-benzoquinone and 2-methyl-1,4-benzoquinone. 2-Methoxy-5-methylhydroquinone is detected for the first time in the Class Diplopoda. 2-Hydroxy-3-methyl-1,4-benzoquinone, 2,3-dimethoxyhydroquinone, 2-methyl-3,4-methylendioxyphenol, and 2,3-dimethoxy-5-methylhydroquinone are registered for the first time in representatives of the family Julidae. The similar chemical composition of defense secretions in all analyzed European julids and Pacific spirobolids supports the idea of the chemical consistency of defensive compounds in juliform millipedes.     

A comparative study of photocatalytically active nanocrystalline tetragonal zyrcon-type and monoclinic scheelite-type bismuth vanadate

Monoclinic scheelite-type BiVO₄ is currently considered as one of the most promising non-titania photocatalysts, wheras tetragonal zircon-type BiVO₄ is still poorly understood. Herein, a new and simple synthetic approach was applied and nanostructured single-phase zircon-type BiVO₄ was successfully prepared by a controllable ethylene-glycol colloidal route. In addition, nanostructured monoclinic scheelite-type BiVO₄ powders were also fabricated through annealing of the as-prepared samples. A comparative study of the two BiVO₄ polymorphs was conducted and it turned out that the novel synthetic approach had a significant impact on porosity and photocatalytic performance of zircon-structured BiVO₄. All the prepared materials, as-prepared and annealed, were mesoporous, while measured values of specific surface area of some zircon-structured samples (～34?m²/g) were ～7 times higher than those reported thus far for this phase. Interestingly, for the first time, zircon-type BiVO₄, previously considered to be a poor photocatalyst, exhibited a better overall performance in degradation of methyl orange compared to monoclinic scheelite-type BiVO₄. Hence, it could be expected that the here-presented synthesis and observations will both arouse interest in scarcely studied tetragonal zircon-type BiVO₄ and facilitate as well as speed up further research of its properties.     

Thermodynamic modeling of vapor-liquid equilibria and excess properties of the binary systems containing diethers and n-alkanes by cubic equation of state

A comparison of the performances of two different approaches of cubic equations of state models, based on a classical van der Waals and mixing rules incorporating theG ^E equation, was carried out for correlation of Vapor-Liquid Equilibria (VLE), H^E and C _P ^E data alone, and simultaneous correlation of VLE+H^E, VLE+C _P ^E , H^E +C _P ^E and VLE+H^E +C _P ^E data for the diethers (1,4-dioxane or 1,3-dioxolane) with n-alkane systems. For all calculations the Peng-Robinson-Stryjek-Vera cubic equation of state (PRSV CEOS) was used. A family of mixing rules for the PRSV CEOS based on the Modified van der Waals one-fluid mixing rule (MvdW1) and two well-known CEOS/G^E mixing rules (MHV1 and MHV2), was considered. The NRTL equation, as the G^E model with linear or reciprocal temperature dependent parameters, was incorporated in the CEOS/G^E models. The results obtained by the CEOS/G^E models exhibit significant improvement in comparison to the MvdW1 models.     

Raman spectra of high‐density,low‐density,and linear low‐density polyethylene pellets and prediction of their physical properties by multivariate data analysis

Raman spectra have been measured for pellets of five samples of high‐density polyethylene (HDPE), seven samples of low‐density polyethylene (LDPE), and six samples of linear low‐density polyethylene (LLDPE). The obtained Raman spectra have been compared to find out characteristic Raman bands of HDPE, LDPE, and LLDPE. Principal component analysis (PCA) was applied to the Raman spectra in the 1600–650 cm^?1 region after multiplicative scatter correction (MSC) to discriminate the Raman spectra of the three different PE species. They are classified into three groups by a score plot of PCA factor 1 vs. 2. HDPE with high density and high crystallinity gives high scores on the factor 1 axis, while LDPE with low density and low crystallinity yields negative scores on the same axis. It seems that factor 1 reflects the density or crystallinity. A PC weight loadings plot for factor 1 shows six upward peaks corresponding to the bands arising from the crystalline parts or all‐trans ? (CH₂)_n? groups and seven downward peaks ascribed to the bands of the amorphous or anisotropic regions and those arising from the short branches. Partial least‐squares (PLS‐1) regression was applied to the Raman spectra after MSC to propose calibration models that predict the density, crystallinity, and melting points of the polyethylenes. The correlation coefficient was calculated to be 0.9941, 0.9800, and 0.9709 for the density, crystallinity, and melting point, respectively, and their root‐mean‐square error of cross validation (RMSECV) was found to be 0.0015, 3.3707, and 2.3745, respectively. The loadings plot of factor 2 for the prediction of melting point is largely different from those for the prediction of density and crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 443–448, 2002     

A Mathematical Model for the Calculation of the Adhesion of a Flame Sprayed Coating of Aluminum on S 235 JR Steel

In this work the method of response surfaces was used for the purpose of drawing up a mathematical model for the calculation (forecasting) of the adhesion of a flame sprayed coating of powdered aluminum on S 235 JR steel. Experimental work was conducted according to a fractional central-composite design at three levels. The adhesion of the coatings made with combinations of input parameters of the procedure according to the experiment plan mentioned is measured in line with the EN 582 standard. A mathematical model was derived describing the dependence of the experimentally obtained adhesion values on the input parameters of the procedure. The possibility of analyzing the influence of the parameters on the adhesion for a certain combination of input parameters has been presented with the use of perturbation plots.     

Lipids and Antiplatelet Therapy: Important Considerations and Future Perspectives

Lipids play an essential role in platelet functions. It is known that polyunsaturated fatty acids play a role in increasing platelet reactivity and that the prothrombotic phenotype plays a crucial role in the occurrence of major adverse cardiovascular events. The ongoing increase in cardiovascular diseases’ incidence emphasizes the importance of research linking lipids and platelet function. In particular, the rebound phenomenon that accompanies discontinuation of clopidogrel in patients receiving dual antiplatelet therapy has been associated with changes in the lipid profile. Our many years of research underline the importance of reduced HDL values for the risk of such a rebound effect and the occurrence of thromboembolic events. Lipids are otherwise a heterogeneous group of molecules, and their signaling molecules are not deposited but formed “on-demand” in the cell. On the other hand, exosomes transmit lipid signals between cells, and the profile of such changes can be monitored by lipidomics. Changes in the lipid profile are organ-specific and may indicate new drug action targets.     

The Use of Object-Oriented Modeling for Water Resources Planning in Egypt

Water problems are omnipresent and are already becoming a limiting factor in the development of many countries. Currently the balance between the available and required water in Egypt is fragile. Any movement away from the balancing point means either less ambitious economic development or depletion of the resources and degradation of the environment. The continuing revolution in computer hardware and software is expected to provide more insight into the water problems and to alleviate some of the future water crises. In this paper we have investigated potential benefits which can be accrued from the application of object-oriented modeling in water resources.