A method of estimating the standard gibbs free energy of formation

Standard Gibbs free energy of formation (ΔG_f⁰), an important property needed in design calculations has been estimated using molar refraction, R_M. The linear relationships derived between ΔG_f⁰ and R_M tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy.     

Evaporated Thin Films of CdS and CdTe: Optimization for Photovoltaic Applications

Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper     

IP address allocation protocols in vehicular ad hoc networks

In vehicular ad hoc networks (VANETs), communication takes place between vehicles to vehicles, the vehicles to the road side units, and vice-versa. The basic purpose of these communications is to share and exchange tremendous amount of data and information. For efficient information sharing, a systematic and structured connection establishment algorithm is needed. In VANETs, each connected node of the network need to be assigned a unique address. Hence, an algorithm is needed for the proper assignment of unique address to all nodes in the network. This paper explains different types of IP address protocols in VANETs. We have also explained advantage and disadvantage of existing IP address allocation protocols in VANETs.     

The effect of hydrogen in the mechanism of aluminum-induced crystallization of sputtered amorphous silicon using scanning Auger microanalysis

The metal-induced crystallization (MIC) of hydrogenated sputtered amorphous silicon (a-Si:H) using aluminum has been investigated using X-ray diffraction (XRD) and scanning Auger microanalysis (SAM). Hydrogenated, as well as non-hydrogenated, amorphous silicon (a-Si) films were sputtered on glass substrates, then capped with a thin layer of Al. Following the depositions, the samples were annealed in the temperature range 200 °C to 400 °C for varying periods of time. Crystallization of the samples was confirmed by XRD. Non-hydrogenated films started to crystallize at 350 °C. On the other hand, crystallization of the samples with the highest hydrogen (H₂) content initiated at 225 °C. Thus, the crystallization temperature is affected by the H₂ content of the a-Si. Material structure following annealing was confirmed by SAM. In this paper, a comprehensive model for MIC of a-Si is developed based on these experimental results.     

Rice-like CuO nanostructures for sensitive electrochemical sensing of hydrazine

In this work, a low temperature aqueous chemical growth methodology was used for the fabrication of CuO nanostructures. The as-synthesised nanostructures were then elaborately characterised by number of analytical techniques such as scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The obtained nanostructures were observed to possess interlaced rice-shaped structural features with the length and width of individual rice determined to be in the range of 200–300 nm and 50–100 nm respectively. The unique nanostructures when utilised as electrode material exhibited excellent electro-catalytic potential towards oxidation of hydrazine in alkaline media. The excellent conductive of CuO added by the high surface area of obtained nanorice-like structures enabled development of highly sensitive (3087 µA mM⁻¹ cm⁻²), selective and stable electrochemical sensor for hydrazine. In addition, the successfully application of the developed sensor in spiked tap, bottled and industrial water samples for the detection of hydrazine suggested its feasibility for practical environmental application.

     

Structural characterization of octadecyl modified MCM-41 silica by NMR and FTIR

Mesoporous MCM-41 silica spheres were prepared via the pseudomorphic route, using commercial prontosil silica spheres. Surface modification offers a great opportunity to adjust both the pore structure and surface properties of MCM-41 type materials which results in materials of improved hydrothermal and mechanical stability to make them promising candidates for chromatographic applications. In the present context, the obtained MCM-41 silica spheres were surface modified with octadecyl (C₁₈) alkyl chains, by using direct grafting and surface polymerization methods, in order to vary the degree of surface hydrophobicity. The resulting materials were characterized before and after surface modification using various characterization techniques, with special emphasis on NMR and FTIR spectroscopies, for studying the attachment, mobility and the conformational order of the attached alkyl chains.