Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.

     

Synthetic Secoisolariciresinol Diglucoside (LGM2605) Prevents Asbestos-Induced Inflammation and Genotoxic Cell Damage in Human Mesothelial Cells

Although alveolar macrophages play a critical role in malignant transformation of mesothelial cells following asbestos exposure, inflammatory and oxidative processes continue to occur in the mesothelial cells lining the pleura that may contribute to the carcinogenic process. Malignant transformation of mesothelial cells following asbestos exposure occurs over several decades; however, amelioration of DNA damage, inflammation, and cell injury may impede the carcinogenic process. We have shown in an in vitro model of asbestos-induced macrophage activation that synthetic secoisolariciresinol diglucoside (LGM2605), given preventively, reduced inflammatory cascades and oxidative/nitrosative cell damage. Therefore, it was hypothesized that LGM2605 could also be effective in reducing asbestos-induced activation and the damage of pleural mesothelial cells. LGM2605 treatment (50 µM) of huma n pleural mesothelial cells was initiated 4 h prior to exposure to asbestos (crocidolite, 20 µg/cm²). Supernatant and cells were evaluated at 0, 2, 4, and 8 h post asbestos exposure for reactive oxygen species (ROS) generation, DNA damage (oxidized guanine), inflammasome activation (caspase-1 activity) and associated pro-inflammatory cytokine release (IL-1β, IL-18, IL-6, TNFα, and HMGB1), and markers of oxidative stress (malondialdehyde (MDA) and 8-iso-prostaglandin F2a (8-iso-PGF2α). Asbestos induced a time-dependent ROS increase that was significantly (p < 0.0001) reduced (29.4%) by LGM2605 treatment. LGM2605 pretreatment also reduced levels of asbestos-induced DNA damage by 73.6% ± 1.0%. Although levels of inflammasome-activated cytokines, IL-1β and IL-18, reached 29.2 pg/mL ± 0.7 pg/mL and 43.9 pg/mL ± 0.8 pg/mL, respectively, LGM2605 treatment significantly (p < 0.0001) reduced cytokine levels comparable to baseline (non-asbestos exposed) values (3.8 pg/mL ± 0.2 pg/mL and 5.4 pg/mL ± 0.2 pg/mL, respectively). Furthermore, levels of IL-6 and TNFα in asbestos-exposed mesothelial cells were high (289.1 pg/mL ± 2.9 pg/mL and 511.3 pg/mL ± 10.2 pg/mL, respectively), while remaining undetectable with LGM2605 pretreatment. HMGB1 (a key inflammatory mediator and initiator of malignant transformation) release was reduced 75.3% ± 0.4% by LGM2605. Levels of MDA and 8-iso-PGF2α, markers of oxidative cell injury, were significantly (p < 0.001) reduced by 80.5% ± 0.1% and 76.6% ± 0.3%, respectively. LGM2605, given preventively, reduced ROS generation, DNA damage, and inflammasome-activated cytokine release and key inflammatory mediators implicated in asbestos-induced malignant transformation of normal mesothelial cells.     

Capillary forces between sediment particles and an air-water interface

In the vadose zone, air-water interfaces play an important role in particle fate and transport, as particles can attach to the air-water interfaces by action of capillary forces. This attachment can either retard or enhance the movement of particles, depending on whether the air-water interfaces are stationary or mobile. Here we use three standard PTFE particles (sphere, circular cylinder, and tent) and seven natural mineral particles (basalt, granite, hematite, magnetite, mica, milky quartz, and clear quartz) to quantify the capillary forces between an air-water interface and the different particles. Capillary forces were determined experimentally using tensiometry, and theoretically assuming volume-equivalent spherical, ellipsoidal, and circular cylinder shapes. We experimentally distinguished between the maximum capillary force and the snap-off force when the air-water interface detaches from the particle. Theoretical and experimental values of capillary forces were of similar order of magnitude. The sphere gave the smallest theoretical capillary force, and the circular cylinder had the largest force due to pinning of the air-water interface. Pinning was less pronounced for natural particles when compared to the circular cylinder. Ellipsoids gave the best agreement with measured forces, suggesting that this shape can provide a reasonable estimation of capillary forces for many natural particles.     

Thermoelectric cold-chain chests for storing/transporting vaccines in remote regions

The cold chain is one of the key elements of the preventive health-care delivery system. Vaccines have to be carried long distances, stored in remote places and during this period the temperature has to be maintained within certain specified values. Realizing the needs of such requirements, the Department of Science & Technology, New Delhi (Govt. of India) assigned a project to the R&D Division of MECON, Ranchi for development of Thermoelectric Cold-Chain Chest operated by 12 V DC vehicular battery. The resulting portable thermoelectric (i.e. Peltier effect) Cold-Chain Chest (TCC) operated successfully even in an ambient environment of 45 °C, mainly for preserving and transporting life-saving medicines for urban as well as rural areas.     

Quarterwave microstrip antenna on a ferrimagnetic substrate

Experiment conducted on a microstrip quarterwave antenna structure on a typical ferrite substrate reveals reduction in size, interesting radiation characteristics and a broadband nature over a wide range of frequencies in the lower UHF region.     

Assessment of groundwater depletion–induced land subsidence and characterisation of damaging cracks on houses: a case study in Mohali-Chandigarh area,India

Bulletin of Engineering Geology and the Environment - The present study identified groundwater depletion–induced land subsidence by spaceborne differential interferometric SAR (DInSAR)...     

The basalt stone quarries of eastern India

Quarrying of basalt stone in the Early Cretaceous Rajmahal Trap region of eastern India is increasing at an alarming pace. The quarries have created an extensive ugly landscape of pits and overburden dumps. The stone workshops continuously emit dust. These quarries generate year‐round employment in an impoverished terrain. The workforce mostly comprises the socio‐economically deprived indigenous tribal population. They are an important source of income to the State Governments of Jharkhand and West Bengal. While the need for building stone cannot be denied in a region that is rapidly industrialising and urbanising, issues of land degradation and health cannot be ignored. The paper offers measures to contain environmental degradation and generate alternative sources of income with bio‐fuel crops such as Jatropha curcas.     

Solid particle erosion behaviour of hardfacing deposits on cast iron—Influence of deposit microstructure and erodent particles

Solid particle erosion (SPE) behaviour of different hardfacing electrodes deposited on gray cast iron (ASTM 2500) was studied using quartz sand and iron ore as erodent particles. Erosion test was carried out as per ASTM G76 test method. Considerable differences in erosion rates were found among different hardfacing electrodes at normal impact. Both volume fraction of carbides and type of carbides played an important role in the erosion behaviour of the deposits when quartz sand was used as erodent particles. On the other hand, only volume fraction of carbides irrespective of carbide type mainly controlled the erosion rate of the same deposits when iron ore was used as erodent particles. Such difference is attributed due to difference in metal removal mechanisms by the two erodent particles used. Hard quartz sand particles were capable of causing damage to most of the carbides while relatively softer iron ore particles were unable to fracture any carbides present in the microstructures. Furthermore, relatively brittle matrix led to high erosion rate which is significant in case of quartz sand as erodent, but not in case of iron ore particles. Like abrasion resistance, hardness is not a true index of erosion resistance of hardfacing deposits.     

An innovative device for instant measurement of Surface Electro-Myography for clinical use

Surface Electro-Myography (SEMG) signal plays key roles for clinical measurement. The strength of this signal at different instant of time and at different places of our body shows the respective muscle strength and identify if any types of muscles fatigue occurs or not. This is useful for sports personnel’s and especially for amputees and different orthopedic patients. The surgeon should have a vivid knowledge about the muscle strength of any part of human body. So a portable hand carrying device is necessary. In this paper we want to illustrate a proposed system which can indicate the strength as well as display the RMS value of the collected Electro-Myography signal on a proposed trainer board consists of a LED bar which indicates the respective strength of the signal in volts. The following system has also a provision to display the strength pattern in a PC in Lab View environment. This shows a detailed analysis of the EMG signal in respect to its waveform, equivalent DC value etc.