A Noisy Channel Tolerant Image Encryption Scheme

In this paper, we present an image encryption scheme that has the capability to tolerate noisy effects of a wireless channel. This means if the encrypted image data is corrupted by channel noise up to a certain level, correct decryption is possible with some distortion. The proposed image encryption scheme relies on some very interesting properties of orthogonal matrices containing columns that form a set of orthonormal basis vectors. Besides being tolerant to noisy channels, the proposed scheme also provides good security against well-known cryptographic attacks as demonstrated in this paper by a number of experimental results and security analysis.     

A new nickel metal organic framework (Ni-MOF) porous nanostructure as a potential novel electrochemical sensor for detecting glucose

Journal of Porous Materials - A Ni-MOF-based novel electrochemical sensor was synthesized with high surface area of 1381 m2/g, significant porosity of 1.14–9.6 nm and average...     

Irreversible changes in protein conformation due to interaction with superparamagnetic iron oxide nanoparticles

The understanding of the interactions between nanomaterials and proteins is of extreme importance in medicine. In a biological fluid, proteins can adsorb and associate with nanoparticles, which can have significant impact on the biological behavior of the proteins and the nanoparticles. We report here on the interactions of iron saturated human transferrin protein with both bare and polyvinyl alcohol coated superparamagnetic iron oxide nanoparticles (SPIONs). The exposure of human transferrin to SPIONs results in the release of iron, which changes the main function of the protein, which is the transport of iron among cells. After removal of the magnetic nanoparticles, the original protein conformation is not recovered, indicating irreversible changes in transferrin conformation: from a compact to an open structure.     

Rheological and thermal stability of novel weak gels based on sulfonated polyacrylamide/scleroglucan/chromium triacetate

The present study deals with weak gels based on sulfonated polyacrylamide (SPA)/scleroglucan (SC)/Cr³⁺ with an exceptional thermal stability in electrolyte media. The rheological results showed that on increasing the SC concentration the shear viscosity and storage modulus of the SPA/SC/Cr³⁺ system were increased and the dependence of the storage modulus on frequency became weaker. The yield stress of the SPA/SC/Cr³⁺ system was higher than that of the corresponding SPA/SC system. The thermochemical stability increased with increasing relaxation time. The SPA/SC/Cr³⁺ semi‐interpenetrating network exhibited the lowest viscosity loss in electrolyte media; therefore this system may be a potential candidate for enhanced oil recovery applications. © 2016 Society of Chemical Industry     

Electrochemical gold deposition from sulfite solution: application for subsequent polyaniline layer formation

Electrochemical gold deposition from sulfite solutions was studied by means of voltammetry, EIS and EQCM. A gold film electrode was used for polyaniline layer formation by electrochemical oxidation of aniline. The standard electrochemical reduction potential of the reaction [Au(SO₃)₂]³⁻ + e⁻ = Au + 2 SO₃²⁻ was determined, and is equal to 0.116 V (vs. NHE). Both solution stirring and temperature increase accelerate the electrochemical reduction of gold, when the electrode potential is below −0.55 V. When the potential is above −0.55 V the electrochemical reduction proceeds via passive layer formation. Our study suggests that the passive layer consists of chemically adsorbed sulfite ions and sulfur. The gold film deposited from sulfite solution is a high quality substrate suitable for conducting polymer layer formation. This technique, where a polymer layer electrode is prepared by thin gold film deposition onto a metal surface and by subsequent polymer layer formation, can be applied in sensor research and technology.     

Computational Fluid Dynamics versus Experiment: An Investigation on Liquid Weeping of Nye Trays

The weeping phenomenon was investigated using some experimental tests and a numerical model. The tests were performed within a 1.22‐m‐diameter pilot‐scale column including two chimney trays and two Nye test trays with an air‐water system. The rates of weeping were measured in the Nye trays with two heights of the weir and a hole area of 5 %. Moreover, the weeping rates in the outlet and inlet halves of the Nye tray and the total weeping rate were calculated. In the next step, an Eulerian‐Eulerian computational fluid dynamics (CFD) technique was used. The results show good agreement between the attained CFD findings and the experimental data.     

Impact of Flood Spreading on Groundwater Level Variation and Groundwater Quality in an Arid Environment

In arid and semiarid areas, bimodal and high rainfall leads to infrequent flood that can be extremely damaging. To reduce the impacts of persistent intra-seasonal drought and also to reduce flood damaging in arid and semiarid areas, rainwater storage is a prerequisite that keeps water far from evapotranspiration, increases groundwater level and decreases flood hazards modification to exchange between surface water and groundwater through flood spreading, dams, etc. The purpose of this paper is to delineate and explain variations in groundwater recharge and groundwater quality along an ephemeral stream that has been modified by flood spreading. Groundwater samples were collected from 14 deep wells located at different distances from flood spreading projection area (FSPA) in 1 month interval during September 2005 to September 2008. Groundwater quality was followed via Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^-, Hco₃^- SO₄^2-, Electrical Conductivity (EC) and pH measurements for two time periods between 2005 and 2008. The results show significant impact of flood spreading in groundwater table and groundwater salinity variation. Groundwater table decreased in all study wells, but groundwater drawdown increased by increasing the distance to FSPA (during 4 years study, 11.02 m in the well located at 20 m of FSPA versus 38.88 in the well located at 1,825 m). Also ion concentration increased in all of the wells during the study period, but the increasing ion concentration was significantly less important in FSPA closeness.     

Mathematical modelling of mass transfer in the concentration polarisation layer of flat‐sheet membranes during clarification of pomegranate juice

Evaluation of membrane clarification of pomegranate juice showed that a cake layer is created at the beginning of the process. This evaluation was used as the basis for modelling the solute concentration in the concentration polarisation layer to control the fouling of the membrane. The model of changes in concentration as a function of time and distance (in its dimensionless form) was solved numerically using the Forward‐Time/Central‐Space (FTCS) method. Programming was performed using MATLAB software, and the predicted concentration on the membrane surface was compared with experimental data; the prediction fit well with the experimental data. The model showed that the solute concentration increased as distance to the membrane surface decreased, time increased, transmembrane pressure increased and velocity decreased. Also, the model matched the experimental data in that it showed the cake layer to be created in the early stages of the membrane clarification process.     

Active disturbance rejection and Lyapunov redesign approaches for robust boundary control of plate vibration

In this paper, two approaches, namely active disturbance rejection control (ADRC) and Lyapunov redesign, are utilised to stabilise the vibration of a boundary-controlled flexible rectangular plate in the presence of exogenous disturbances. Based on ADRC, an estimation/cancellation strategy is applied where disturbance is estimated online by an extended state observer (ESO) and cancelled by injecting the output of ESO into the feedback loop. By the Lyapunov redesign, on the other hand, the control law intended for a nominal system is redesigned by adding a (discontinuous) control component that makes the system robust to large uncertainties. Both control algorithms are designed directly based on partial differential equation model of the plate so that spillover instabilities that are a result of model truncation are avoided. The established control schemes are able to stabilise the plate vibration by actuating and sensing only along the plate boundary while accounting for the dynamical effects of Gaussian curvature integral, in-plane membrane force and actuator mass. The stability of each control approach is proven using Lyapunov analysis. The efficacy of each proposed control is illustrated by simulation results.     

Electrokinetic power generation of non-Newtonian fluids in a finite length microchannel

In order to examine the effects of the fluid type as the electrolyte solvent on the efficiency of electrokinetic energy conversion, a comparative numerical study among three different fluid types of a transient electrokinetic flow through a single circular finite length microchannel has been conducted. The system was initially at an equilibrium non-flow state, and a step change in flow was applied and the calculation proceeding until steady state was achieved. The analysis was based on non-dimensional transport governing equations that were scaled using Debye length as the characteristic length scale and diffusion time as characteristic time scale. The fluid types considered were shear thinning, Newtonian, and shear thickening, and a power law modeled them with the scaled flow behavior index having values of 0.2, 1.0, and 1.8. In order to isolate the electrokinetic effects of the different relationships between the shear strain rate and shear stress, the flow consistency index was adjusted so that in all the cases the flow rate and total pressure drop matched that of water at 25 °C. All other fluid and interfacial properties were the same for all cases. The key observational difference between the various fluid types was that their different axial velocity profile acted on essential the same free charge density profiles. Consequently, the convection current density (i.e., the radial distribution of charge being advected along the channel) was strongly affected by the fluid type. Integration of this quantity to calculate the convection current showed that for the particular fluid properties chosen the shear thinning fluid was 20 % higher than the Newtonian fluid, while the shear thickening fluid was only 4 % lower than the Newtonian fluid. Combined with the effects, these different currents have on the streaming potential, the shear thinning fluid was 50 % more effective in converting flow work to electrical work than the Newtonian fluid, while the shear thickening fluid was only 16 % lower than the Newtonian fluid.