Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

Identification of plant model of linear induction motors for a traction system intended for use in a high‐performance controller

A linear induction motor (LIM) is suitable for use in trains. The motor can be used in both wheel‐suspended and contact‐less types such as the Linear Metro and HSST trains in Japan. The LIM has end winding as well as asymmetrical winding. The end effect is a major problem in the LIM, and it makes the analysis, design, and control of motors difficult. This paper describes a method that combines numerical analysis and the equivalent circuit for the LIM in order to design a high‐performance controller for the LIM that includes the end effect. A sample basic field‐oriented control scheme that is based on the plant model is applied to the LIM in order to check the control performance. The theory of rotary induction motors is used for verification. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 179(2): 44–54, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21171     

Application of microalgae hydrolysate as a fermentation medium for microbial production of 2-pyrone 4,6-dicarboxylic acid

1. Download high-res image (309KB)
2. Download full-size image

     

Effect of changing groundwater levels caused by land-use changes on greenhouse gas fluxes from tropical peat lands

Monthly measurements of carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O) fluxes in peat soils were carried out and compared with groundwater level over a year at four sites (drained forest, upland cassava,upland and lowland paddy fields) located in Jambi province, Indonesia. Fluxes from swamp forest soils were also measured once per year as the native state of this investigated area. Land-use change from drained forest to lowland paddy field significantly decreased the CO₂ (from 266 to 30 mg C m^–2 h^–1) and N₂O fluxes (from 25.4 to 3.8 g N m^–2 h^–1), but increased the CH₄ flux (from 0.1 to 4.2 mg C m^–2 h^–1) in the soils. Change from drained forest to cassava field significantly increased N₂O flux (from 25.4 to 62.2 g N m^–2 h^–1), but had no significant influence on CO₂ (from 266 to 200 mg C m^–2 h^–1) and CH₄ fluxes (from 0.1 to 0.3 mg C m^–2 h^–1) in the soils. Averaged CO₂ fluxes in the swamp forests (94 mg C m^–2 h^–1) were estimated to be one-third of that in the drained forest. Groundwater levels of drained forest and upland crop fields had been lowered by drainage ditches while swamp forest and lowland paddy field were flooded, although groundwater levels were also affected by precipitation. Groundwater levels were negatively related to CO₂ flux but positively related to CH₄ flux at all investigation sites. The peak of the N₂O flux was observed at –20 cm of groundwater level. Lowering the groundwater level by 10 cm from the soil surface resulted in a 50 increase in CO₂ emission (from 109.1 to 162.4 mg C m^–2 h^–1) and a 25% decrease in CH₄ emission (from 0.440 to 0.325 mg C m^–2 h^–1) in this study. These results suggest that lowering of groundwater level by the drainage ditches in the peat lands contributes to global warming and devastation of fields. Swamp forest was probably the best land-use management in peat lands to suppress the carbon loss and greenhouse gas emission. Lowland paddy field was a better agricultural system in the peat lands in terms of C sequestration and greenhouse gas emission. Carbon loss from lowland paddy field was one-eighth of that of the other upland crop systems, although the Global Warming Potential was almost the same level as that of the other upland crop systems because of CH₄ emission through rice plants.     

Photocatalytic decomposition of gaseous HCHO over a titanium dioxide film formed on a hydrophobic PET sheet

BACKGROUND: The authors (Chem Eng J 148, 234 (2009)) previously demonstrated the excellent performance of a photocatalytic reactor with a parallel array of nine light sources. To enhance the possibility of practical application of this reactor, the present work explores the use of a PET (polyethylene terephthalate) sheet as a new cheap material to support TiO₂, as an alternative to glass tubes. A method of coating the hydrophobic PET sheet with a TiO₂ film using an aqueous coating solution is investigated and the performance of the TiO₂‐PET sheet prepared evaluated. RESULTS: The affinity of the coating solution for the PET sheet is greatly enhanced by addition of 0.01% (w/w) nonionic surfactant (polyoxyethylene lauryl ether). A relatively uniform thin TiO₂ film is formed on the entire surface of the PET sheet by applying the coating solution to the PET sheet and drying it at 100 °C. Decomposition experiments of gaseous HCHO indicate that the photocatalytic activity, although initially low, is increased with repeated use. This is because surfactant molecules added interfere initially with the decomposition of HCHO. After their decomposition, the TiO₂–PET sheet decomposes HCHO at almost the same rate as does the TiO₂–glass tube. CONCLUSION: The photocatalytic reactor with a parallel array of nine light sources can utilize a PET sheet as TiO₂ support with a reduction in material cost. Copyright © 2011 Society of Chemical Industry     

Separation of C6H6 and C6H12 from H2 using ionic liquid/PVDF composite membrane

Ionic liquid/polyvinylidene fluoride composite membrane was successfully prepared by impregnation method and used for the separation on organic chemical hydride process. The separation factors of C₆H₆/H₂ and C₆H₁₂/H₂ in the ternary mixture system were 7500 and 300, respectively. The ionic liquid membrane showed an excellent possibility as a technology of H₂ purification in the organic chemical hydride process by removing aromatic hydrocarbon and cycloalkane simultaneously from the ternary system. © 2015 American Institute of Chemical Engineers AIChE J, 62: 624–628, 2016