硫氰酸铵光度法测定钒渣中钼量

研究了钒渣中钼与硫氰酸铵的显色反应，结果表明λmax=460nm，在0～50mg／50ml范围内吸光度与钼量的关系符合比尔定律，用于钒渣中钼的测定，结果令人满意。     

3D Printing Conductive Composites with Poly(ionic liquid) as a Noncovalent Intermedia to Fabricate Carbon Circuits

In this study, a kind of imidazole type poly(ionic liquid) ([PEP-MIM]Cl) is synthesized, which can disperse carbon effectively. [PEP-MIM]Cl is used as an intermediate to coat carbon on the poly(acrylic acid)(PAA-co-MBA) via ion exchange to obtain conductive polymer composite (CPC). A series of characterizations are performed. Experiments show that carbon can be coated on the PAA-co-MBA uniformly, and compared with using carbon as filler, this method requires less carbon to achieve good conductive performance. The carbon layer on the polymer's surface is enriched via the swelling-shrinking properties of PAA-co-MBA according to the SEM images. Furthermore, in combination with 3D printing technology, PAA-co-MBA can be designed into different shapes to achieve various functions such as pressure-sensing element. Finally, a new type of CPC named carbon clad polymeric laminate (CCPL) is prepared by using the carbon coating method and 3D printing technology. It has the potential to replace copper clad laminate (CCL) and printed circuit board (PCB), to a certain extent. This technology expands the preparation method and application of the CPC such as flexible and wearable conductive fabrics.     

板式塔中气液两相流乳化态的研究

在(φ)500 mm和(φ)334mm的冷模装置中观察和测定了气液两相流乳化态的流体力学性能.实验观察发现,按照Hofhuis和Zuiderweg提出的判据Ψ(气液动量参数)＞0.2时,确实出现了乳化态,塔板上的泡沫飞溅消失,降液管中的气泡明显细化.测定数据表明,在乳化态中,降液管中部平均气泡直径比泡沫态降低一倍,约为2～4mm,离开降液管的气含率也比泡沫态高得多,约有20%～40%.实验还发现,不同Ψ值,乳化程度不同,随着Ψ值的增大,乳化程度加深,表明乳化是一个伴随和渐进的过程.     

丙烯精馏塔塔底丙烷馏分油的精制

介绍了中国石油辽阳石化分公司乙烯厂丙烯精馏塔塔底油-丙烷馏分油的精制工艺。该工艺可脱出丙烷馏分油中的绿油组分，从而提高了丙烷馏分油的使用效果和价值。     

Industrial TiO2 based nacreous pigments as functional building materials: Photocatalytic removal of NO

In this paper, the photocatalytic activity of industrial titanium dioxide (TiO₂) based nacreous pigments was researched as functional building materials for photocatalytic NO remove. Three industrial TiO₂ based nacreous pigments were selected to estimate the photocatalytic activity for NO remove. This study is a good proof that pearlescent pigments can eliminate NO, and its performance is positively correlated with its titanium dioxide content. And this research will widen the application of nacreous pigments in functional building materials, and provide a new way to eliminate in door nitric oxide pollution.     

弓形降液管两相流动的CFD模拟

采用欧拉两相流模型,模拟了弓形降液管内的空气一水两相流动,得到了与弓形降液管堰长垂直截面上的气含率分布与两相的速度分布.结果表明,降液管底部气含率低,中部的气含率增加显著,上部的气含率较高.液相对气相有很强的夹带作用,同时气相的浮力对于液相流动也有一定的阻碍作用.将模拟结果与文献进行对照,两者吻合较好,说明提出的模型对于降液管内流体流动状况的模拟是合适的.     

YL-1OO型自动加药装置在乙烯循环水场的应用

介绍了国产YL-100型自动加药装置功能及其在中国石化茂名石化乙烯工业公司乙烯循环水场的应用情况,结果表明其运行平稳,总磷测试数据可靠,可达到循环水自动加药控制的目的。     

可双固化树枝形聚酰胺-胺树脂的合成及其涂膜性能研究

探讨了以乙二胺与丙烯酸甲酯交替反应，制备了1．5，2．5代树枝形聚酰胺一胺树脂（PAMAM），对其用甲基丙烯酸缩水甘油酯（GMA）和γ-氨丙基三乙氧基硅烷进行了改性，使其能够紫外光固化和潮气固化。热分析考查了玻璃化温度和热稳定性，并进行了硬度、光泽、光固化速度、潮气固化速度、附着力、柔韧性等测试。     

我国农业保险发展中存在的问题及对策

针对我国农业保险发展现状,分析了农业保险发展中存在的问题.认为目前我国农业保险的发展正处于最困难和最关键的时期.为推动农业保险的快速发展,提出了建立和完善有关法规、加大政策扶持力度,确立农业法定险种、成立综合性农业保险公司、建立再保险机制和多渠道农业保险体系等措施建议.     

Study on volume ratio and plasticizer screening of free coating membranes composed of ethyl cellulose and chitosan

The aim of this study was to optimize the formula of free blended coating membrane of ethyl cellulose (EC) and chitosan (CS), including their suitable ratio range and the best plasticizer used. The dry films were produced by a casting/solvent evaporation method, with different volume ratio of EC and CS solution plasticized by various plasticizers, respectively. The wet films were prepared by immersing dry films in pH 6.8 phosphate buffer saline (PBS) for 24 h. The promising ratio range of EC/CS was below 20/5 or 20/6 with various plasticizer, which was determined by comparing the viscosity of the blended solutions and the morphology of the blended films. The efficiency of plasticization was evaluated by measuring glass transition temperature (T_g). All the testing plasticizers have good compatibility with EC or CS and dibutyl phthalate (DBP) have the strongest efficiency inducing the lowest T_g (39.9°C) of the film. Mechanical properties were evaluated by the ratio of tensile strength (T) to elastic modulus (E). In the wet state, the films with DBP had the highest T/E value (1.2). The results of leaching of plasticizers also verified that DBP was the most stable plasticizer in the films. The release rates of tetramethylpyrazine phosphate (TMPP) through the pellets coated with the blended films of EC/CS (20 : 6 v/v) plasticized by various plasticizers showed that the more water‐soluble the plasticizer was, the more quickly TMPP dissolved from the coated pellets, which further indicated that the water‐insoluble plasticizers (such as DBP) could be more applicable to keep the sustained or controlled release property of the blended films in wet state. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1932–1939, 2006