Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Analysis of polarization plane rotation characteristic in 2D photonic crystal waveguide with chiral medium by condensed node spatial network

Using the photonic band gap in photonic crystals, the fundamental waveguide structures for the light wavelength range have been developed. Based on the fine structure of these many functional devices have been proposed by analytical or numerical simulation methods and the experiments of trial manufacture. In this paper, the treatment of chiral dielectric in the Condensed Node Spatial Network for the vector potential is explained, and we show the polarization plane rotation property in air‐hole and pillar type photonic crystal waveguide structures with the chiral medium substrate. Then, we show the fundamental advantage of the air‐hole type photonic crystal waveguide structure in application to a mode converter. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(1): 7–14, 2005; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20098     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

Gas chromatographic separation of wax esters based on the degree of unsaturation

The wax esters of sperm whale head oil have been characterized by gas-liquid chromatography on an APOLAR 10C column according to their carbon number and number of double bonds. The novel technique permits the direct quantitative analysis of saturated and unsaturated wax esters.     

Design of low‐power all‐optical networks under the constraint of four‐wave mixing

In this paper, we propose a static lightpath establishment method to design low‐power all‐optical networks under the constraint of four‐wave mixing (FWM). Since the FWM causes nonlinear interchannel crosstalk, it degrades the communication quality of optical signals. The FWM crosstalk effect becomes strong in a fiber as the number of passing optical signals increases. Therefore, we should reduce the number of optical signals passing through the same fiber from the perspective of the FWM. Meanwhile, in order to enhance the power efficiency of optical amplifiers, which are deployed at each optical fiber, it is preferred that multiple optical signals are transmitted in the same fiber. In order to decrease the power consumption while keeping high communication quality, the proposed method statically selects routes, wavelengths, and fibers for each traffic demand, considering the FWM crosstalk effect and the usage efficiency of the optical amplifiers. We show the performance of the proposed method through numerical experiments.     

Compact Tunable Narrowband Terahertz-Wave Source Based on Difference Frequency Generation Pumped by Dual Fiber Lasers in MgO:LiNbO<Subscript>3</Subscript>

We demonstrate a high-average-power, single longitudinal-mode, and tunable terahertz (THz)-wave source based on difference frequency generation (DFG) in a MgO:LiNbO₃ (MgO:LN) crystal. The waves for DFG are generated using a pair of Yb-doped pulsed fiber lasers with a master oscillator power fiber amplifier configuration. The average power of the THz-wave output reaches 450 μW at 1.07 THz (280 μm) at a linewidth of 7.2 GHz, and the tunability ranges from 0.35 to 1.07 THz under the pulse repetition frequency of 500 kHz. A short burn-in test of the THz wave is also carried out, and the output power stability is within ± 5% of the averaged power without any active stabilizing technique. The combination of MgO:LN-DFG and stable and robust fiber laser sources is highly promising for the development of high-average-power THz-wave sources, particularly in the high transmission sub-THz region. This approach may enable new applications of THz-wave spectroscopy in imaging and remote sensing.     

Novel grounded and floating high order immittance simulators using OTAs and OAs

This paper proposes novel grounded and floating high order series and parallel immittance simulators using operational transconductance amplifiers (OTAs) and operational amplifiers (OAs) with a finite gain–bandwidth (GB) product. They are composed of active devices (OTAs and OAs) and resistances, and are suitable for monolithic implementation in either CMOS or bipolar technologies. They also realize both positive and negative high order immittances. The circuit characteristics can be electronically tuned by adjusting the transconductances of OTAs and the GB products of OAs. Any transfer functions are realizable using the proposed simulators. Two examples are shown, together with simulation results.     

A capacitive fingerprint sensor chip using low-temperature poly-Si TFTs on a glass substrate and a novel and unique sensing method

We have developed a capacitive fingerprint sensor chip using low-temperature poly-Si thin film transistors (TFTs). We have obtained good fingerprint images which have sufficient contrast for fingerprint certification. The sensor chip comprises sensor circuits, drive circuits, and a signal processing circuit. The new sensor cell employs only one transistor and one sensor plate within one cell. There is no leakage current to other cells by using a new and unique sensing method. The output of this sensor chip is an analog wave and the designed maximum output level is almost equal to the TFT's threshold voltage, which is 2-3 V for low-temperature poly-Si TFTs. We used a glass substrate and only two metal layers to lower the cost. The size of the trial chip is 30 mm/spl times/20 mm/spl times/1.2 mm and the sensor area is 19.2 mm/spl times/15 mm. The size of the prototype cell is now 60 /spl mu/m/spl times/60 /spl mu/m at 423 dpi, but it will be easy to increase the resolution up to more than 500 dpi. The drive frequency is now 500 kHz and the power consumption is 1.2 mW with a 5-V supply voltage. This new fingerprint sensor is most suitable for mobile use because the sensor chip is low cost and in a thin package with low power consumption.     

A QoS-aware routing mechanism for multi-channel multi-interface ad-hoc networks

To accommodate real-time multimedia application while satisfying application QoS requirements in a wireless ad-hoc network, we need QoS control mechanisms. In this paper, we propose a new routing mechanism to support real-time multimedia communication by efficiently utilize the limited wireless network capacity. Our mechanism considers a wireless ad-hoc network composed of nodes equipped with multiple network interfaces to each of which a different wireless channel can be assigned. By embedding information about channel usage in control messages of OLSRv2, each node obtains a view of topology and bandwidth information of the whole network. Based on the obtained information, a source node determines a logical path with the maximum available bandwidth to satisfy application QoS requirements. Through simulation experiments, we confirmed that our proposal effectively routed multimedia packets over a logical path avoiding congested links. As a result, the load on a network is well distributed and the network can accommodate more sessions than QOLSR. We also conducted practical experiments using wireless ad-hoc relay nodes with four network interfaces and verified the practicality of our proposal.     

Output and delay of multi-channel slotted ALOHA systems for integrated voice and data transmission

Packet-switched technology has been developed to offer personal communication services not only for data but also for different types of user-end equipment such as phone-type audio. To satisfy the huge service demand and multi-traffic requirements with limited bandwidth, this paper proposes an efficient procedure of multi-channel slotted ALOHA for integrated voice and data transmission in wireless information networks and presents an exact analysis with which to numerically evaluate the performance of the systems. A channel reservation policy is applied, where a number of channels (called reserved channels) are used exclusively by voice packets, while the remaining channels are used by both voice and data packets, and voice packets select the reserved channels with a given probability (called selection probability). Probability distributions for the numbers of voice and data departures and for the data packet delay are derived. Numerical results compare some cases with different numbers of channels, different numbers of reserved channels and different selection probabilities to discuss what effects they may have on channel utilization, loss probability, average packet delay, coefficient of variation of data packet delay, and correlation coefficient of packet departures. This revised version was published online in June 2006 with corrections to the Cover Date.