A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Extended filters in bounded commutative Rl-monoids

The notion of extended filter of a filter associated to a subset of Rl-monoids is defined and related properties are investigated. Rachunek and Salounova proved that positive implicative filters and Boolean filters in Rl-monoids coincide with a condition in Rachunek and Salounova (Acta Univ Palacki Olomuc Fac rer nat Math 48(1):93–107, 2009). In this paper, we prove that positive implicative filters and Boolean filters coincide without any condition and get some results on various types of filters.     

Solving coupled matrix equations over generalized bisymmetric matrices

In this paper, an iterative algorithm is established for finding the generalized bisymmetric solution group to the coupled matrix equations (including the generalized (coupled) Lyapunov and Sylvester matrix equations as special cases). It is proved that proposed algorithm consistently converges to the generalized bisymmetric solution group for any initial generalized bisymmetric matrix group. Finally a numerical example indicates that proposed algorithm works quite effectively in practice.     

Theoretical and experimental analyses of rheological,compatibility and mechanical properties of PVMQ/XNBR-g GMA/XNBR/GO ternary hybrid nanocomposites

Iranian Polymer Journal - Effects of graphene oxide (GO) on various properties of rubber hybrid nanocomposites based on PVMQ/XNBR-g-GMA/XNBR (phenyl-vinyl-methyl-polysiloxane/carboxylated nitrile...     

Simultaneous measurement of gas hold-up and mass transfer coefficient by tracer dynamic technique in “Emulsair” reactor with an emulsion-venturi distributor

Hydrodynamics and gas-liquid mass transfer have been investigated in an “Emulsair” reactor with cocurrent downflow of gas and liquid. This consists of a cylindrical tank with conical bottom topped by an emulsion-venturi as the gas-liquid distributor in which the gas is self-aspired by action of the kinetic energy of the liquid recirculation. An original tracer dynamic technique using the CO₂-N₂/water system that enables the simultaneous measurement of overall gas hold-up and overall volumetric mass transfer coefficient has been developed and validated using conventional techniques, such as volume expansion for gas hold-up and dynamic oxygenation for mass transfer. It has been shown that gas hold-up and K_La_L can be deduced from the moments of experimental response curves using a CO₂ pulse in the gas feed. Experimental results have proved that hydrodynamics and mass transfer in the Emulsair reactor are strongly influenced by the flow regime in the divergent. Two different regimes have been observed depending on the liquid recirculation flow rate: annular and homogeneous bubbling flows. In both regimes, self-aspired gas flow rate, gas hold-up and K_La_L have been reported to increase with the liquid flow rate. The operation effectiveness, estimated from the gas-to-liquid flow rate ratio, has been shown to pass through a maximum around 0.59 as a function of liquid recirculation. A comparison with the literature proved that this maximum is higher than those observed for other kinds of gas-liquid reactors equipped with a venturi. Correlations for mass transfer estimation have been derived and are in agreement with the literature.     

Study of Hydrodynamics,Mixing and Gas‐Liquid Mass Transfer in a Split‐Rectangular Airlift Reactor

Global hydrodynamic characteristics, liquid mixing and gas‐liquid mass transfer for a 63 L split‐rectangular airlift reactor were studied. Correlations for gas holdup and overall liquid circulation velocity were derived for the air‐water system as a function of the specific power input; these were compared to data and correlations for reactor volumes between 4.7 L and 4600 L. A partial recirculation of small bubbles in the riser was observed when U_gr > 0.03 m/s, which was attributed to the use of a single‐orifice nozzle as the gas phase distributor. The dimensionless mixing time and the overall axial dispersion coefficient were nearly constant for the range of gas flow rates studied. However, values of K_L/d_B were greater than those reported in previous studies and this is caused by the partial recirculation of the gas phase in the riser. While scale effects remain slight, the use of a gas distributor favouring this partial recirculation seems adequate for mass transfer in split‐rectangular airlift reactors.     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Performance evaluation of an importance sampling technique in a Jackson network

Importance sampling is a technique that is commonly used to speed up Monte Carlo simulation of rare events. However, little is known regarding the design of efficient importance sampling algorithms in the context of queueing networks. The standard approach, which simulates the system using an a priori fixed change of measure suggested by large deviation analysis, has been shown to fail in even the simplest network settings. Estimating probabilities associated with rare events has been a topic of great importance in queueing theory, and in applied probability at large. In this article, we analyse the performance of an importance sampling estimator for a rare event probability in a Jackson network. This article carries out strict deadlines to a two-node Jackson network with feedback whose arrival and service rates are modulated by an exogenous finite state Markov process. We have estimated the probability of network blocking for various sets of parameters, and also the probability of missing the deadline of customers for different loads and deadlines. We have finally shown that the probability of total population overflow may be affected by various deadline values, service rates and arrival rates.