Combined effect of gamma-irradiation and conventional cooking onAeromonas hydrophila in meatball

Irradiation combined with a conventional cooking procedure was applied to meatball and the effects on bacterial load and inoculatedAeromonas hydrophila were determined. Meatball samples were irradiated by using a⁶⁰Co source at the dose levels of 0, 0.30,0.75,1.50,2.50 kGy and cold stored at 4±1°C for 7 days. Bacterial load and the count ofA. hydrophila decreased when the irradiation dose level increased. A minimum inhibition effect was found at the dose of 0.30 kGy. Irradiation in combination with a conventional cooking procedure was found to be more effective in reducingA. hydrophila and the bacterial load in meatball. This study indicated that a dose of 0.75 kGy was sufficient to destroy approximately 10⁴ cfu/g ofA. hydrophila in meatball.     

Die zweite Phase der Feldbusentwicklung

The past decade may be regarded as the phase of the fundamental developments in fieldbus systems that were based on the OSI model. Today we are entering a second stage. It is the objective of this issue to present the current state and where the further developments will lead to. This introductory article is intended to give an overview on the subject.     

Auswirkungen von Blitzschlägen auf 20-kV-Energiekabel

Recently appeared defects on high voltage cables have required an urgent evaluation of the impact of lightning strikes necessary. In some cases overvoltages between the copper wire screen of the cable and earth may appear which cause damages of the cablesheath. Field measurements with a classification of the voltage impulses at the copper wire screen have been made to evaluate the number of events. Additionally a numerical model was developed to study the effects of atmospheric discharges on underground cables with emphasis to the influence on the cablesheath. This numeric method was also applied to estimate the effectiveness of different protection arrangements. This contribution presents evaluation methods for overvoltages of cables and a model used firstly for calculating the stress caused by differential voltages and secondly to determinate the influence of protection measures.     

Messmethoden zur Charakterisierung von Mikrowellenleistungstransistoren

For first try designs of microwave power amplifiers it is necessary to know the entire physical behaviour of the used components with high accuracy. The attention should be directed especially to the center component of these circuits, the power transistor, whose nonlinear characteristics have an essential impact on the behavior of the whole amplifier. This article gives an overview of current methods of measurement for microwave power transistor characterization. Furthermore a measurement system is presented, capable of characterizing microwave power transistors within a frequency range from 30 kHz to 8.7 GHz at bias current up to 7.5 A including self heating effects.     

Air Processing of Thick and Semitransparent Laminated Polymer:Non-Fullerene Acceptor Blends Introduces Asymmetric Current–Voltage Characteristics

Non-fullerene acceptors have recently revolutionized indoor organic photovoltaics (OPVs) with power conversion efficiencies exceeding 30% in laboratory scale. Nevertheless, transferring their superior performance to larger-scale prototyping, i.e., air-processing via roll-to-roll compatible techniques, still shows severe challenges. Herein, the industrial potential of the PM6:IO4Cl blend, which is one of the most successful indoor OPV photoactive layers (PALs), is thoroughly investigated. The corresponding thick and semitransparent laminated devices are fabricated entirely in air, by blade and slot-die coating. Their current–voltage (J–V) characteristics show anomalous features depending on the illumination side, with the cathode side generally outperforming the anode counterpart. Electrical and optical modeling reveal that a plausible cause of such a phenomenon is a dead layer that forms at the PAL/anode contact interface that does not contribute to the photocurrent. Said layer becomes undetectable when the PALs are made thin enough (<35 nm each) leading to symmetric J–V curves and improved light utilization efficiency. By screening the photovoltaic performance of multiple donor:acceptor blends, certain all-polymer and polymer:fullerene PALs are identified as adequately symmetric candidates for thick device up-scaling. Finally, ternary blends based on PM6:IO4Cl:fullerene may constitute a viable route to mitigate the electrical asymmetry detected on conventional binary blends.     

Synthesis of compositionally different multicomponent metal-oxide films (SnO2) x (ZnO)1 − x (x = 1–0.5)

The study is concerned with high-purity SnO₂ and ZnO powders produced from salt solutions of corresponding metals by low-temperature hydrothermal synthesis. Fragments of SnO₂ and ZnO ceramic targets formed as 1 × 8 cm bars are fabricated by dry pressing. The bars are used to form composite targets for ion-beam sputtering and the fabrication of compositionally different (SnO₂) _x (ZnO)_{1 ? x} (x = 1–0.5) films appropriate for the production of gas sensors or transparent electronic devices. The optical and electrical parameters of the films with different compositions are studied.     

In Situ observation of the effect of temperature on Cu2O scale morphology

The effect of temperature on copper oxide scale morphology was studied during in situ oxidation of OFHC copper in a hot-stage environmental scanning electron microscope (HSESEM). Cuprous oxide scales grown at low temperature [0.2T_m(Cu₂O)] and intermediate temperatures 0.6–0.7T_m(Cu₂O)] were found to be crystallographically oriented. At intermediate temperatures, scales exhibited nonplanar features such as ridges and growth pyramids. At high temperatures [T> 0.8T_m(Cu₂O)], scales had planar morphologies and a few dislocation growth pits. Downquenching and upquenching of the Cu₂O scales from steady-state oxidation temperatures induced morphological changes such as cavity formation and surface reconstruction.     

Sensitivity to signal quantization of 43 Gb/s and 107 Gb/s optical 16-QAM OFDM transmission with coherent detection

The sensitivity of optical orthogonal-frequency division multiplexing (OFDM) transmission to the finite resolutions of the digital-to-analog (DAC) and analog-to-digital converters (ADC) has been analyzed using numerical simulations. We show that for back-to-back configuration the requirements regarding the number of quantization bits for the DACs are similar to the ones of the ADCs. After transmission over metro and long-haul distances a higher resolution of the DAC/ADC is required compared to back-to-back configuration. We show that after transmission it is sufficient to enhance either the ADC resolution or the DAC resolution by 1 bit.     

Koordinatenmesstechnik für biomedizinische Anwendungen

The importance of computer aided measurement techniques as a means of controlling industrial manufacturing and testing technical products with high accuracy is increasing ever more with the general goal of improving the quality of all kinds of products. This development started about twenty years ago and is still improving. There is also rapid development in biomedical technique and this demands the application of modern computerized measurement techniques and measuring devices. Especially computer aided co-ordinate metrology can be applied as a very important and universal tool for solving complex measuring tasks for workpiece metrology, to evaluate the measuring results to give the basis for the improvement and optimization of future work in the biomedical technique.     

On the design considerations of solid-state power amplifiers for satellite communications: A systems perspective

Conventional solid-state power amplifier (SSPA) design approach isolates radio frequency (RF) design from communication theory. In this paper, a unified SSPA design approach is proposed, which optimizes SSPA parameters (bias voltage and input RF signal power) to minimize total DC power consumption while satisfying received SNR constraint specified by the link budget. The effect of SSPA nonlinearity is quantified by the error vector magnitude measured at its output and the corresponding received SNR degradation is analyzed. Using the quantitative metrics for received SNR, it is possible to evaluate highly nonlinear SSPA classes such as Class-B or deep-Class AB, which are normally not considered in conventional SSPA design approach to be used in satellite communication applications.