CLY型水平臂式三坐标测量机

本文主要对“CLY型水平臂式三坐标测量机”的原理结构及技术性能等作了较为详细的介绍，该机主要应用于模具制造，机械制造等行业。     

优化点焊控制器操作界面设计

电阻点焊以其高效和易于控制的特点在制造业被广泛应用。它的焊接规范参数输入一般通过两种途径,即拨码开关和按键。有些材料和零件需要比较复杂的规范参数,比如,多脉冲(一次焊接中多次通电),各焊点焊接电流不同,焊接电流幅度变化,点、缝焊两用等。一般情况下,可采用增加拨码开关或按     

格法线综合技改

格法线通过熔窑全保温，小炉上升道改造、焦炉煤气聚代液化石油、设备技改、微机配料等，达到了稳定生产，延长窑龄、节约能源、降低成本的目的。     

Thermal—Mechanical Fatigue Behavior and Life Analysis of Cast Ni—base Superalloy K417

In-phase(IP) and out-of-phase(OP)thermal-mechanical fatigue(TMF) behavior of cast Ni-base superalloy K417 was studied.All experiments were carried out under total strain control with temperature cycling between 400-850℃.Both in-phase and out-of-phase TMF specimens exhibited cyclic hardening followed by cyclic softening at the minimum temperature.Besides,they cyclically hardened in the early stage of life followed by cyclic softening at the minimum temperature.Besides,they cyclically hardened in the early stage of life followed by cyclic softening at the maximum temperature.OP TMF life was longer than of IP TMF.Various damage mechanisms operating in different controlled strain ranges and phasing were discussed.A few life prediction methods for isothermal fatigue were used to handle TMF fatigue and their applicability to superalloy K417 was evaluated.The SEM analysis of the fracture surface showed that transgranular fracture was the principal cracking mode for both IP and OP TMF.Oxidation was the main damage mechanism in causing shorter fatigue life for IP TMF compared with OP TMF.     

多半波滤光片及其设计

介绍了简单法布里－珀珞滤光片和多半波滤光片的结构和特性，并且对两者的透射率光谱特性进行了比较。分析了多半波滤光片的特点，进行了最优化的膜系设计。文中给出了一种最优化设计的程序流程图。     

浅谈活性炭在水质净化中的作用

随着社会的进步，人们在生产生活中对水质的要求越来越高，活性炭净水技术是一种有效的方法。这里结合实践，阐述了活性炭在饮用水净化和工业用水深度化处理方面的应用，并对活性炭应用的发展前景进行了展望。     

石油系油浆与煤系闪蒸油的焦化性能——I．热解条件的影响

通过偏光显微镜观察了石油系油浆（LH）与煤系闪蒸油（SN）焦化后所得焦块的光学结构。结果表明，在较宽条件下两种原料单独焦化均得不到取向度高的流线型结构。将两种原料以一定比例混合后先热解丙焦化所得焦块的光学结构明显好于二者混合后直接焦化所得焦块的光学结构，其中LH和SN以3：2的重量比混合后在440℃、1MPa下热解3．5h然后再在530℃、1MPa下焦化8h所得焦块为具有较高取向度的流线型结构，适合于作为针状焦的起始原料。