A Generic Implementation of Tree Skeletons

In data-parallel skeleton libraries, the implementation of skeletons is usually tightly-coupled with that of data structures. However, loose coupling between them like C++ STL will improve modularity and flexibility of skeletons and data structures. This flexibility is particularly valuable for tree skeletons. To achieve such loose coupling, we present an iterator-based interface of trees for tree skeletons. We have implemented tree skeletons on the basis of our interface; we present their design and implementation. This paper also reports the results of preliminary experiments.     

Preparation of porous membranes by selective decomposition of adamantane unit in ABA‐type triblock copolymer

The mechanism of pore formation by selective decomposition of adamantane unit in an ABA‐type triblock copolymer derived from 4,4‐(hexafluoroisopropylidene)diphthalic anhydride‐2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) and poly(2‐methyl‐2‐adamantylmethacrylate) (PMAdMA) was investigated on this basis. This study aims to developing a novel method of material design for high‐precision gas separation membranes and application to electric devices by improving dielectric constant. Scanning electron microscopy images showed that the membrane structure changed considerably after heating; the difference increased with the increase in adamantane content. Interestingly, the internal structure of Block(36 mol%6FDA‐TeMPD/64 mol%PMAdMA) membrane was almost unchanged although its surface structure was changed. These results suggest that the mechanism of formation of porous membrane involves the decomposition of adamantane unit from surface. In addition, more adamantane units inside the membrane were discharged to the surface of the membrane through a path formed by decomposed adamantane units. POLYM. ENG. SCI., 56:1191–1200, 2016. © 2016 Society of Plastics Engineers     

The Critical Energy Release Rate of Welded Joints Between Fiber-Reinforced Thermoplastics and Metals When Thermal Residual Stress is Considered

Thermal effects on welded joints between fiber-reinforced thermoplastics (FRTPs) and metals have been investigated theoretically and experimentally. Because FRTPs use thermoplastics as the matrix resin, they have advantages over fiber-reinforced thermoset plastics (FRPs or FRSPs), including the ability to be welded. When dissimilar materials are welded together, however, thermal stress occurs due to the different thermal expansions of the materials and affects the energy release rate of the joint. Therefore, a method for evaluating the true energy release rate, including the effect of thermal stress, is necessary for strength evaluation tests. Although several theories that compensate for the thermal stress and evaluate the true energy release rate have already been proposed, they require parameters that are difficult to measure. Therefore, it is difficult to apply them in experimental investigations. In this article, a theoretical method with easily measurable parameters is proposed to calculate the energy release rate of welded double cantilever beam (DCB) joints. The effect of the thermal stress on the critical energy release rate is discussed in terms of the experimental results of a welded DCB specimen composed of a FRTP and an aluminum alloy.     

Physics‐based model of lithium‐ion batteries running on a circuit simulator

The authors developed a physics‐based equivalent circuit model of a lithium‐ion battery (LIB) whose parameters are continually updated, reflecting the theoretical calculation results of the Butler‐Volmer equation, diffusion equations of the lithium‐ion and lithium, and Nernst equations of the liquid and solid phases. The developed model was applied to the charge/discharge simulations of an LIB, and the experimental and simulated results of constant current discharges and pulsed‐charge/discharge were found to be in excellent agreement. In particular, using the developed model, analyzing transient responses of the LIB derived from the transition of the electric double layer charging to the electrode reaction is possible. These results demonstrate that the electrochemical performance of an LIB can be calculated on a circuit simulator using the developed model.     

Thermodynamics on the Bi-Fe-Ti System and the Gibbs Energy of Bi<Subscript>9</Subscript>Ti<Subscript>8</Subscript>

Partial isothermal sections of the Bi-Fe-Ti system at 700 °C and 900 °C were constructed to investigate the reactivity of Fe with Bi-Ti liquid alloy. In the ternary system, three-phase equilibria such as liquid-Fe-Fe₂Ti, liquid-Fe₂Ti-Bi₂FeTi₄, and liquid-Bi₉Ti₈-Bi₂FeTi₄ were confirmed at both temperatures. The solubility of Fe in liquid Bi at these temperatures is negligibly small. On the other hand, it is notable that the solubility of Fe in liquid Bi containing Ti at 900 °C is much larger and reaches 2.3 mol pct. Then, we measured the electromotive force (emf) between Bi-20 mol pct Ti alloy and pure Ti at 700 °C in equimolar NaCl-KCl where 1 mol pct TiCl₂ was added. From the result, the interaction parameter of the liquid phase in the Bi-Ti system and the standard molar Gibbs energies of formation of Bi₉Ti₈ and Bi₂FeTi₄ at 700 °C were estimated.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

Novel Method to Measure the Creep Strength of Adhesively Bonded Butt Joints Subjected to Constant Loading Using a Hydro-Pneumatic Testing Machine

This article proposes a new method to measure the creep strength of adhesively bonded joints using a hydro-pneumatic testing machine and a specimen holder, on which multi-specimens can be mounted in one testing machine. Creep tests were conducted on stainless steel butt joints bonded with epoxy adhesives. A hydro-pneumatic loading system was introduced to avoid successive failures of multi-specimens as well as to achieve a stable and constant loading through the experiments. Even after a failure occurs in one of the joints and thus generates an impact, the loading system is capable of absorbing the shock so that the other remaining joints do not fail simultaneously. It was experimentally verified that choke valves, which were introduced in the hydraulic circuit of the system, worked as a damper when failure occurred. Additionally, it was established that automatic reloading to the remaining specimens after the failure was short enough compared with the creep rupture time. As this new method relates to the efficiency of creep testing, the utility of the proposed approach with the multi-specimen setup has been verified.