Mechanism of preventive action of Viburnum dilatatum Thunb (gamazumi) crude extract on oxidative damage in rats subjected to stress

The fruit of Viburnum dilatatum Thunb (gamazumi) has been shown to prevent oxidative injury induced by water immersion restraint stress (WIRS) in rats. In this study the effect of gamazumi crude extract (GCE) on antioxidant enzymatic activities in the plasma, liver and stomach of rats with WIRS was investigated to elucidate the mechanism of prevention of oxidative injury. Ulcer formation and lipid peroxidation were inhibited in rats supplied GCE for 2 weeks in comparison with rats supplied water. Although the activities of plasma, hepatic and gastric antioxidant enzymes in rats given water were decreased by WIRS, only slight changes were observed in rats given GCE. There was no difference in enzymatic activities between the water and GCE groups not subjected to WIRS. Furthermore, ferrous ascorbate‐induced oxidation in hepatic homogenate from rats given GCE was inhibited. These results suggest that ingestion of GCE does not induce antioxidant enzymes and that the absorbed antioxidant components of GCE have a direct effect on oxidative injury in the body. Copyright © 2003 Society of Chemical Industry     

Two acyl-CoA dehydrogenases of Acinetobacter sp. strain M-1 that uses very long-chain n-alkanes

Two genes encoding acyl-CoA dehydrogenases, acdA and acdB, arranged in tandem, were found in the chromosomal DNA of Acinetobacter sp. strain M-1. AcdA was purified from the parental strain and AcdB was purified from an Escherichia coli strain expressing the cloned gene. The substrate specificities of the two enzymes suggest that AcdA is a medium-chain acyl-CoA dehydrogenase and that AcdB is a long-chain acyl-CoA dehydrogenase. Characterization of n-alkane metabolism in Acinetobacter sp. strain M-1 has revealed parallel pathways as well as enzymes with overlapping specificities in a single pathway. The two acyl-CoA dehydrogenases described here provide another example of the physiological complexity underlying n-alkane utilization.     

Inhibitory effects of flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu) on antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells

We found that two distinct flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu), isoquercitrin (Isq) and hyperin (Hyp), are capable of inhibiting antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells. In order to elucidate the underlying mechanisms, we examined effects of Isq and Hyp on cellular responses induced by antigen stimulation. Treatment with both Isq and Hyp markedly inhibited antigen-stimulated elevation of intracellular free Ca²⁺ concentration and reactive oxygen species (ROS). Isq and Hyp did not affect NADPH oxidase (NOX) activity, but they possessed DPPH radical-scavenging activity similar to that of epigallocatechin gallate, a potent anti-oxidant, Finally, Isq and Hyp showed little or no effects on Ag-stimulated Syk activation or phosphorylation of signalling molecules. These results indicate that inhibition of antigen-stimulated degranulation by Isq and Hyp is mainly due to suppression of intracellular Ca²⁺ elevation, which is caused by direct scavenging of ROS that are generated by NOX. Our findings suggest that Isq and Hyp, isolated from the peel of persimmon, would be beneficial for alleviating symptoms of type I allergy.     

Experimental study of several types of ground heat exchanger using a steel pile foundation

An experimental study of several types of ground heat exchangers (GHEs) installed in a steel pile foundation, including double-tube, U-tube, and multi-tube GHEs, was carried out at Saga University. Water flows through the heat exchangers and exchanges heat to or from the ground. The performance of GHEs was investigated under actual operation in the cooling mode with flow rates of 2, 4, and 8 l/min. Temperatures of the ground and GHE tube wall were measured to find the temperature distributions according to the depth of the ground and depth of the GHE tube wall. The temperatures of the inlet and outlet of circulated water were also measured to calculate the heat exchange rate. The double-tube had the highest heat exchange rate, followed by the multi-tube and U-tube GHEs. For example, the average heat exchange rate of GHEs over 24 h of continuous operation with a flow rate of 4 l/min was 49.6 W/m for the double-tube, 34.8 W/m for the multi-tube, and 30.4 W/m for the U-tube. An increasing flow rate increased the heat exchange rate of the GHEs. The heat exchange rates increased significantly for flow rate increases from 2 to 4 l/min, but only slightly changed from 4 to 8 l/min.     

Restoration of solid oxide fuel cell stacks after failure of partial cells

We investigated a solid oxide fuel cell stack that employs anode-supported planar cells in which two intermediate plates are installed every 10 cells to determine the influence of the separation and reconnection of the intermediate plates after high temperature operation. We showed that this separation and reconnection caused no significant degradation in stack performance. A 30-cell stack, which was constructed by removing two 10-cell sub-stacks from a 50-cell stack that had operated stably 1200 h, functioned well. The difference between the average voltages of the cells in the 50- and 30-cell stacks was less than 3% when the current density, fuel utilization, and oxygen utilization were 0.30 A cm⁻², 60%, and 15%, respectively. The 30-cell stack operated stably for about 1200 h with almost no degradation. These findings indicate that our stack can be restored after cells in the stack have broken down simply by removing the 10-cell sub-stacks that contain the broken cells and replacing them with undamaged 10-cell sub-stacks.     

Influences of electroosmotic flows in nanopillar chips on DNA separation: Experimental results and numerical simulations

The various potential factors affecting the performance of nanopillar chips on DNA separation were investigated from the viewpoints of both numerical calculations and actual experiments. To yield higher performance and replace the conventional DNA separation techniques such as microchip electrophoresis, the phenomenon specific to the nanopillar chips should be deeply understood. In this paper, although various factors affecting the performance of the nanopillar chips are considered, we focused on the effect of electroosmotic flow, which is particularly noticeable in quartz-made nanopillar chips. High-resolution separation of DNA was realized when an electroosmotic flow was suppressed by simply using a higher concentration of buffer, but DNA separation failed in the presence of an electroosmotic flow. It was confirmed from the numerical simulations and the direct observations that the deformation of DNA band during the injection process was induced by electroosmotic flow and consequently led to a poor resolution.     

Effects of antiallergic drug, pemirolast potassium on phospholipase D activation in antigen-stimulated rat basophilic leukemia (RBL-2H3) cells

An anti-allergic drug, permirolast potassium (TBX), inhibited antigen (Ag)-induced phospholipase D (PLD) activation in rat basophilic leukemia (RBL-2H3) cells. The concentration-dependent inhibitory profile for Ag-induced PLD activation was parallel to those for secretory response and inositol phosphate formation. In contrast, TBX had no effect on PLD activation caused by calcium ionophore A23187 or phorbol myristate acetate. These results suggest that TBX inhibits Ag-induced PLD activation by interfering with the signal transduction pathway upstream of Ca2+ mobilization and protein kinase C activation.     

Development of a 3-D simulation analysis system for PWR control rod drive mechanism

A 3-D virtual analysis system to analyze the motion of control rod drive mechanism (CRDM) was developed. The analysis system consists of a 3-D model established as per the actual dimensions and interfaces of CRDM parts and a routine to calculate the forces acting on the mechanism, and was verified by mock-up test using the same equipment as the actual product. The analysis system is useful for functional evaluation in maintenance or to factor out root causes in the case of malfunction of CRDM.