A Low Power Dissipation Technique for a Low Voltage OTA

This paper proposes a novel low power dissipation technique for a low voltage OTA. A conventional low power OTA with a class AB input stage is not suitable for a low voltage operation (±1.5 V supply voltages), because it uses composite transistors (referred to CMOS pair) which has a large threshold voltage. On the other hand, the tail-current type OTA needs a large tail-current value to obtain a sufficient input range at the expense of power dissipation. Therefore, the conventional tail-current type OTA has a trade-off between the input range and the power dissipation to the tail-current value. The trade-off can be eliminated by the proposed technique. The technique exploits negative feedback control including a current amplifier and a minimum current selecting circuit. The proposed technique was used on Wang's OTA to create another OTA, named Low Power Wang's OTA. Also, SPICE simulations are used to verify the efficiency of Low Power Wang's OTA. Although the static power of Low Power Wang's OTA is 122 W, it has a sufficient input range, whereas conventional Wang's OTA needs 703 W to obtain a sufficient input range. However, we can say that as the input signal gets larger, the power of Low Power Wang's OTA becomes larger.     

Development of a specimen heating holder with an evaporator and gas injector and its application for catalyst

A specimen heating holder equipped with a gas injector and an evaporator has been developed for use with conventional transmission electron microscopes (TEMs). The developed specimen holder allows both synthesis of metal oxide support and deposition of catalyst nano-particles in situ. Since the holder is designed to be used in small gapped high-resolution objective lens pole-piece, all the procedure from the synthesis of support material to the deposition of catalyst as well as the behavior of the catalyst nano-particles on the support can be observed at near atomic resolution. The developed specimen holder was applied to the study of AuPd catalyst. First, air was injected onto heated aluminum particles via a gas injector to synthesize Al(2)O(3) support. Then, nano-particles of AuPd were deposited on the Al(2)O(3) support. After the deposition, the synthesized Al(2)O(3) support was heated and air was injected again to observe behaviors of the deposited AuPd nano-particles at elevated temperatures in the aerial environment. Behaviors of the AuPd nano-particles such as coalescence, segmentation and diffusion to the Al(2)O(3) support were dynamically observed at atomic level high resolution.     

A 20 GHz Steerable Array Antenna Using 3-bit Dielectric Slab Phase Shifters on a Coplanar Waveguide

A simple steerable array antenna is designed and developed using a movable dielectric phase shifter. The change of effective dielectric constant at different dielectric slab positions on a coplanar waveguide is used as the phase shifter. The impedance matching and desired phase shift conditions are satisfied at two slab heights, and the reflection is designed to be minimized at these slab positions. The low-loss dielectric material is used as the dielectric slab and is placed close to a coplanar transmission line with airgap. The 4times4 steerable array antenna with the phase shifters is designed and fabricated at 20 GHz. The H-plane radiation patterns are measured at different phase shift positions and compared with the expected results     

VSATS in Japan

In Japan, private domestic communications satellites, JCSAT and SuperBird, carrying K_u-band transponders, were launched in 1989, and the use of the VSATs started. To expedite a wider use of the VSAT systems, regulations were amended in June 1989 to permit simplified licensing procedures for the VSATs which conformed to technical standards. This contribution describes the usage of VSAT systems in Japan along with the licensing procedures and the technical standards.     

The Direct Spectroscopy of Positronium Hyperfine Structure Using a Sub-THz Gyrotron

Positronium is an ideal system for research on Quantum Electrodynamics (QED), especially in a bound state. A discrepancy of 3.9 standard deviations has been found between the measured hyperfine structure (Ps-HFS) and the QED predictions. This may be due to the contribution of unknown new physics or common systematic effects in previous measurements, in all of which the Zeeman effect was used. We propose a new method to directly measure the Ps-HFS using a high power gyrotron. We compare two resonators which have been developed to supply sufficient power to drive the direct transition, a Fabry-Pérot resonator and a ring resonator with a diffraction grating. We plan to perform first direct measurement of Ps-HFS within the next six months.     

Direct Measurement of Positronium HyperFine Structure: ～ A New Horizon of Precision Spectroscopy Using Gyrotrons ～

Positronium is an ideal system for research on QED, especially in a bound state. A discrepancy (3.9σ) is found recently between measured HFS values and the QED prediction (including up-to O(α ³ log α ^− 1), where α is the fine-structure constant.). It might be due to a contribution of unknown new physics or common systematic problems in all the previous measurements. A new method to measure HFS directly is performed using a high power gyrotron. The transition from ortho-positronium to para-positronium has been observed with 5 σ CL, which is the first observation of M1 transition in (sub)Terahertz region. New technologies of high power gyrotrons are developed for precision spectroscopy.     

Magnetization distribution of magnetic vortex of amorphous FeSiB investigated by electron holography and computer simulation

The three-dimensional spin structure of the magnetic vortex of FeSiB, an amorphous soft magnetic material, was investigated by holography observation and computer simulation. Magnetization distribution in the neighborhood of the vortex center was estimated from the phase distribution obtained by holography observation. To confirm this magnetization distribution, sample-tilting experiments were performed: when the sample was tilted with respect to the electron beam direction, the phase-image center was found to shift along the tilting axis. Finite-element computer simulation was carried out to estimate the amount of shifts of the phase-image center in the sample tilting from the experimental magnetization distributions in the no sample-tilting conditions. We found that the simulated shifts of the phase-image center were in good agreement with those in the sample-tilting experiment, thus confirming the magnetization distribution near the vortex center obtained by holography observation.     

Advanced Wireless Access System

The key words for the future telecommunications are personalization, multi-media services and high accessibility to the network. These trends naturally lead to radio media application to access links. In this sense, this paper proposes an advanced wireless access system with a capacity supporting broadband video and data services.Concept of the system can be defined as a new radiocommunication category with advantages of both fixed and mobile systems.The system is designed to transport ATM-based signals using SHF (or EHF) bands to wireless terminals, interconnected with optical fibers at the network side. The basic system configuration is presented as well as examples of system parameters.For radio aspects the maximum service coverages of the radio base stations are calculated based on availability consideration. Preferred frequency bands for actual operation are also discussed.     

Selective Determination of Dopamine on a Boron‐Doped Diamond Electrode Modified with Gold Nanoparticle/Polyelectrolyte‐coated Polystyrene Colloids

Negatively charged gold nanoparticles (AuNPs) and a polyelectrolyte (PE) have been assembled alternately on a polystyrene (PS) colloid by a layer‐by‐layer (LBL) self‐assembly technique to form three‐dimensional (Au/PAH)₄/(PSS/PAH)₄ multilayer‐coated PS spheres (Au/PE/PS multilayer spheres). The Au/PE/PS multilayer spheres have been used to modify a boron‐doped diamond (BDD) electrode. Cyclic voltammetry is utilized to investigate the properties of the modified electrode in a 1.0 M KCl solution that contains 5.0 × 10^?3 M K₃Fe(CN)₆, and the result shows a dramatically decreased redox activity compared with the bare BDD electrode. The electrochemical behaviors of dopamine (DA) and ascorbic acid (AA) on the bare and modified BDD electrode are studied. The cyclic voltammetric studies indicate that the negatively charged, three‐dimensional Au/PE/PS multilayer sphere‐modified electrodes show high electrocatalytic activity and promote the oxidation of DA, whereas they inhibit the electrochemical reaction of AA, and can effectively be used to determine DA in the presence of AA with good selectivity. The detection limit of DA is 0.8 × 10^?6 M in a linear range from 5 × 10^?6 to 100 × 10^?6 M in the presence of 1 × 10^?3 M AA.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.