Triglyceride composition of chrysalis oil,an insect lipid

Chrysalis oil, an insect fat obtained from the spent silk worm pupae, Bombyx mori, is a by-product of sericultural industry and represents a potential source of 1750 tons of linolenic-rich oil per annum for India. Fatty acid and triglyceride compositions of chrysalis oil have been determined by the combination of the techniques of lower temperature segregation, lipolysis, thin layer and gas liquid chromatography. Percentage contents of the component acids are: C_14:0, 0.6; C_16:0, 19.3; C_18:0 3.9; C_18:1, 17.7; C_18:2, 9.8, and C_18:3, 48.7. Major component triglycerides are, LLnLn, 5.2%; PLnO, 6.4%;OLnLn, 9.6%; LnLnLn, 10.5% and PLnLn, 14.0% (P, palmitic; O, oleic; L, linoleic and Ln, linolenic acids. On low temperature crystallization, Chrysalis oil yielded two fractions amounting together to 40% of the total with composition quite similar to that of linseed oil.     

Polyaniline as a Gas-Sensor Material

Polyaniline (PANI) was synthesized by oxidative polymerization of aniline using ammonium persulfate in an acid medium. The polyaniline salt was converted to base form by treatment with ammonium hydroxide. The polyaniline base was dissolved in N-methyl pyrrolidone (NMP) for film casting. The cast film was doped with HCl for obtaining higher conductivity. Both doped and undoped PANI films were characterized by UV-visible, FTIR, and XRD analyses. The electrical conductivity of the PANI film was studied by a four-point probe method at room temperature. Finally, ammonia gas-sensing characteristics of the prepared polyaniline film were studied by measuring the change in electrical conductivity on exposure to ammonia gas at different concentrations. The influence of concentration of acid during polymerization of aniline and dopant concentration on the gas sensing characteristics of PANI film are reported in this paper.     

Copper extraction into emulsion liquid membranes using LIX 984N-C®

The extraction of copper from aqueous sulfate media into ELMs using the extractant LIX 984N-C was studied. Appropriately characterized emulsions on the basis of viscosity and internal drop sizes were used to study the effect of different parameters on extraction. The effects of stirring speed, surfactant concentration, pH of the external continuous phase, carrier concentration, internal phase stripping acid concentration and initial copper concentration are reported. These results show that LIX 984N-C efficiently extracts copper at low pH values typical of leach solutions. It was found that LIX 984N-C could extract up to 80% copper from aqueous solutions at pH value of 1. Performance of LIX 984N-C was also compared with LIX 84 and LIX 84-I at different pH values. Results indicate that LIX 984N-C could open up new avenues for extraction of copper into ELMs, not only from dilute solutions, but also from sulfuric acid leach solutions.     

e-Commerce security — A life cycle approach

The rapid evolution of computing and communication technologies and their standardizations have made the boom in e-commerce possible. Lowering of the cost of operation, increase in the speed of transactions, and easy global reach to customers and vendors have been the reasons for the overwhelming popularity of this new way of commerce. This article examines the issues related to the security of the assets and transactions in the e-commerce components and activities. Since large public money is involved in the transactions, the role of information security and privacy is not exaggerated in this kind of business. After examining the technologies used in e-commerce, the article goes on to identify the security requirement of e-commerce systems from perceived threats and vulnerabilities. Then e-commerce security is viewed as an engineering management problem and a life cycle approach is put forward. How the e-commerce systems can be made secure using the life cycle approach is outlined. The relevant standards and laws are also discussed in the perspective of e-commerce. The article closes with some future research directions and conclusions.     

Investigation of Eccentric Open Eye Formation in a Slab Caster Tundish

Metallurgical and Materials Transactions B - Inert gas shrouding in tundish can result in the formation of a tundish open eye (TOE) due to the presence of reversed flows on the upper surface of the...     

Efficacy of organophosphorus derivatives containing chalcones/chalcone semicarbazones against fungal pathogens of sugarcane

Ten newly synthesized organophosphorus derivatives containing substituted chalcones and substituted chalcone semicarbazones were tested for their antifungal efficacy against Colletotrichum falcatum, Fusarium oxysporum, Curvularia pallescens (all sugarcane pathogens). The O,O-diethylphosphate derivatives containing 2-chlorochalcone and 2-chlorochalcone semicarbazone exhibited 70-85% mycelial inhibition against all the test fungi at 1000 ppm. The screening results were correlated with structural features of the tested compounds.     

Interaction between borosilicate melt and Inconel

Understanding the mode of interaction between borosilicate melt and Inconel is important for long time usage of melter pot in vitrification plant. The present study shows that significant elemental exchanges take place across the borosilicate melt/Inconel interface resulting in the development of (Fe, Ni)CrO₄ needle and (Fe, Ni)Cr₂O₄ cubic phases. This results in significant depletion of Cr within Inconel near the interface. Beside these, CrB precipitates formed along the Inconel grain boundaries.     

Face posture estimation using eigen analysis on an IBR (image based rendered) database

In this paper, we present a novel representation of the human face for estimating the orientation of the human head in a two dimensional intensity image. The method combines the use of the much familiar eigenvalue based dissimilarity measure with image based rendering. There are two main components of the algorithm described here: the offline hierarchical image database generation and organization, and the online pose estimation stage. The synthetic images of the subject's face are automatically generated offline, for a large set of pose parameter values, using an affine coordinate based image reprojection technique. The resulting database is formally called as the IBR (or image based rendered) database. This is followed by the hierarchical organization of the database, which is driven by the eigenvalue based dissimilarity measure between any two synthetic image pair. This hierarchically organized database is a detailed, yet structured, representation of the subject's face. During the pose estimation of a subject in an image, the eigenvalue based measure is invoked again to search the synthetic (IBR) image closest to the real image. This approach provides a relatively easy first step to narrow down the search space for complex feature detection and tracking algorithms in potential applications like virtual reality and video-teleconferencing applications.