Environmental effects on the mechanical properties of Co3Ti containing boron,carbon and beryllium

The environmental effects on Co₃Ti polycrystals doped with boron, carbon and beryllium were investigated by tensile testing in air at 293 to 1173 K and the results were compared with those tested in vacuum. The yield stresses of the alloys observed were independent of the test environment. The elongation and ultimate tensile strength of the alloys observed were strongly dependent on the test environment and also the test temperatures. Ductility losses were found for the samples which were tested in air at temperatures below 473 K. The losses were accompanied by a change in fracture mode from transgranular to intergranular. It was suggested that this embrittlement was due to the hydrogen absorbed from air. Neither species boron, carbon nor beryllium were observed in this work to affect the environmental effects on the ductility behaviour of Co₃Ti alloys.     

Enzymatic enantioselective hydrolysis of acyloxyferrocenophanes using lipases and esterases

Enantioselective hydrolysis of racemic acetate or butyrates of 1-hydroxy [3](1,1′) ferrocenophane and endo-1-hydroxy [4](1,2) ferrocenophane using lipases, pig liver esterase and horse liver esterase resulted in the formation of (R)-alcohols and (S)-esters.     

Promotion of practical SIMOX technology by the development of a 100 mA-class high-current oxygen implanter

A high-current oxygen implanter which has an acceleration energy of 200 keV and a beam current of 100 mA has been developed. This implanter has been used to form SIMOX wafers, on which p- and n-channel MOSFETs have been fabricated on a trial basis. Good electrical characteristics have been achieved with these MOSFETs. It has been shown that a 100 mA-class high-current oxygen implanter can promote SIMOX technology in a practical way.     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.     

Periodic, fully developed, natural convection in a channel with corrugated confining walls

Numerical solutions are obtained for natural convection heat transfer in an open channel with corrugated, isothermal confining walls. The channel is very long so that the fluid temperature approaches the wall temperature and the flow can be assumed to be periodically fully developed. The solutions are obtained by solving the full elliptic governing equations in a transformed coordinate system which maps the channel with corrugated walls onto a channel with flat walls. The periodic, fully developed Nusselt number for the corrugated channel is expressed by the relation Nu = CGrPr/(L/W) where Gr, Pr and L/W are the Grashof number, the Prandtl number and the aspect ratio, respectively, and C is a parameter which is a function of Gr, L/W and the corrugation angle θ. In the limiting case of θ = 0° (two flat walls), the parameter C approaches a constant value. This value is within 1.6% of the exact analytical result.     

Zinc oxide-coated plasmonic chip modified with a bispecific antibody for sensitive detection of a fluorescent labeled-antigen

A plasmonic biosensor chip of silver-coated PMMA grating with a zinc oxide (ZnO) overlayer is fabricated for surface plasmon field-enhanced fluorescence (SPF) detection of Cy5-labeled green fluorescent protein (GFP). A bispecific antibody (anti-GFP x anti-ZnO antibody) prepared in our lab is densely immobilized on the sensor chip for GFP detection. The sensitivity of the plasmonic biosensors is improved due to densely packed antibodies and ZnO-coating that suppresses nonspecific protein adsorption and fluorescent quenching. With the ZnO-coated plasmonic chip, Cy5-labeled GFP of 10 pM can be detected through SPF. This sensitivity is 100 higher compared with the normal fluorescent detection on a ZnO-coated glass slide.     

折叠之舞

这所住宅位于日本古老的首都--京都中心传统住宅街区内,由建筑师Kentaro Takeguchi+Asako Yamamoto/ALPHAVILLE共同设计建造。由于地区性建筑规范和邻里关系的制约,住宅外部延续了日本传统木制别墅的特征,尽量低调谦和地融入外部传统街区环境之中。当夜暮降临,透过住宅临街的木质格栅散透出柔和的暖光,晕染着这个     

Environmental effect on mechanical properties of recrystallized L12-type Ni3(Si,Ti) intermetallics

The environmental effect on the mechanical properties of boron-doped and undoped Ni₃(Si, Ti) polycrystals was investigated by tensile testing in air from room temperature to 1073 K, and the results were compared with those obtained previously by tensile testing in vacuum. The environmental effect for the Ni₃(Si, Ti) alloys was significant at ambient temperatures whereas that for the boron-doped Ni₃(Si, Ti) alloys was considerable at elevated temperatures. When these samples at associated temperatures were tensile tested in air and also at low strain rate, intergranular fracture was dominant. It was suggested that the environmental embrittlements at low and high temperatures were due to hydrogen and oxygen absorbed from the air, respectively, and were caused by the weakening of the grain-boundary cohesion. It was proposed that boron competing with hydrogen, for site occupation or for its effectiveness at grain boundaries, has the effect of suppressing hydrogen embrittlement, whereas it was suggested that the low-melting phases, consisting of boron and oxygen (and/or constituent atoms), may be responsible for the ductility loss in the boron-doped Ni₃(Si, Ti) alloys.     

Bradykinin stimulates type II alveolar cells to release neutrophil and monocyte chemotactic activity and inflammatory cytokines

In the present study, we evaluated the potential of bradykinin (BK) to induce the release of neutrophil and monocyte chemotactic activity (NCA and MCA) and cytokines from an alveolar type II epithelial cell line, A549 cells. BK stimulated A549 cells to release NCA and MCA in a dose- and time-dependent manner (P < 0.001). Checkerboard analysis revealed that both NCA and MCA involved chemotactic and chemokinetic activity. Molecular sieve column chromatography showed three molecular weight masses (near 19 kd, 8 kd, and 400 d) for NCA and several molecular weight peaks (near 66 kd, 25 kd, 19 kd, 16 kd, and 400 d) for MCA. The release of NCA and MCA was inhibited by cycloheximide and lipoxygenase inhibitors (P < 0.01). The NCA and MCA were inhibited by leukotriene B4 (LTB4) receptor antagonist (P < 0.01), and the concentration of LTB4 was high enough for NCA and MCA. Antibodies to interleukin (IL)-8 and granulocyte colony-stimulating factor (G-CSF) attenuated NCA (P < 0.01), and antibodies to monocyte chemotactic protein-1 (MCP-1), G-CSF, and transforming growth factor (TGF)-beta attenuated MCA (P < 0.01). The levels of IL-8, G-CSF, MCP-1, and TGF-beta increased time dependently (P < 0.01). BK also stimulated the release of ILeukin-6 from A549 cells (P < 0.001). The receptors responsible for the release of NCA, MCA, and individual chemokines involved both BKB1 and BKB2 receptors. These data suggest that BK may stimulate alveolar type II pneumocytes to release inflammatory cytokines, which then may modulate the lung inflammation.