Electron spin resonance of transparent alumina ceramics fabricated by spark plasma sintering

Transparent α‐alumina ceramics are fabricated using spark plasma sintering. Paramagnetic defects related to the optical properties of the ceramics have been investigated using electron spin resonance (ESR) analyses. An isotropic ESR signal at g = 2.003 (S = 1/2) with a linewidth of 0.5 mT is formed during sintering. The g = 2.003 signal intensity has a weak correlation with the absorbance in the visible region but does not correlate with the real in‐line transmission (RIT) at 650 nm. An ESR signal with a fine structure attributed to Fe³⁺ was detected in both the α‐Al₂O₃ starting powder and the sintered ceramic samples. The degree of c‐axis orientation of the grains has been determined using the Fe³⁺ signal intensity, which depends on the angle between the directions of the c‐axis and the applied magnetic field. The ESR analysis indicated that the c‐axis tends to be oriented in the direction of the sintering pressure. The degree of c‐axis orientation was found to correlate with the RIT in highly densified ceramics.     

A comparison of the quality of carbon black dispersions prepared by dry and wet grind processes

Conclusions  We have investigated the deflocculation mechanism of waterborne jet black dispersions made in the dry-grind process based on the two-roll milling. We also compared this dry-grind process with the conventional wet media grind process. As a result, we found that:

Crystal transformation from the α- to the β-form upon tensile drawing of poly(l-lactic acid)

A film of poly(l-lactic acid) (PLLA) consisting of highly oriented α crystals was uniaxially drawn by tensile force. The effects of the draw ratio (DR), draw temperature (T_d), and draw stress on the crystal/crystal transformation from the α- to the β-form crystals were studied. At the initial stage of drawing, the highly oriented α crystals of the starting film transformed into a broader orientation distribution, and significant crystal disorder was introduced. Upon further drawing, the α crystals steadily transformed into β crystals with increasing the DR. For the drawing at a constant T_d, the crystal transformation proceeded more efficiently at a higher draw rate and, hence, at a higher draw stress. Furthermore, for the drawing at a constant draw rate, the transformation proceeded with DR most efficiently for the tensile draw at a T_d around 140 °C, although the draw stress increased with decreasing the T_d. The present result combined with the previous finding in the drawing of PLLA by solid-state extrusion [Macromolecules 36 (2003) 3601] suggests that there is a T_d of around 140 °C at which the crystal transformation proceeds most efficiently with DR, suggesting that there are two factors that have opposite effects on the efficiency of the crystal transformation with increasing the T_d. However, as a result of the combined effects of the T_d and DR on the crystal transformation and the ductility increase with the T_d, an oriented film consisting predominantly of β crystals was obtained by tensile drawing at a T_d in the range of 140-170 °C to the highest DR achieved at each T_d.     

Revisiting the Mechanism of β-O-4 Bond Cleavage During Acidolysis of Lignin. Part 6: A Review

ABSTRACT

This paper reviews our results on the acidolysis of dimeric non-phenolic β-O-4-type lignin model compounds in aqueous 82% 1,4-dioxane containing an acid at 85°C. It was shown that the mechanism of a C₆-C₂-type model compound, 2-(2-methoxyphenoxy)-1-(3,4-dimethoxyphenyl)ethanol IX, is fairly different from that of a C₆-C₃ analogue, 2-(2-methoxyphenoxy)-1-(3,4-dimethoxyphenyl)propane-1,3-diol XX, suggesting the significance of the presence of the γ-hydroxymethyl group. It was confirmed that the hydride transfer mechanism exists as a reaction route of the benzyl-cation-type intermediates derived from both compounds, and the contribution of this mechanism is greater than expected in the acidolysis of compound XX. An enol ether compound, 2-(2-methoxyphenoxy)-3-(3,4-dimethoxyphenyl)prop-2-en-1-ol, was first detected in the acidolysis of compound XX using the DBr/D₂O/1,4-dioxane system. It was confirmed in the acidolysis of compound XX using HBr that the mechanism is different from that in the system using either HCl or H₂SO₄ and an unknown mechanism contributes to the reaction. This unknown mechanism surprisingly contributed more with decreasing concentration of HBr or Br^?, provided that Br^? still existed in the system.     

Lightning protection of overhead power distribution lines

There are two major protective methods against lightning outages on overhead distribution lines. One is by use of surge arresters and the other is by an overhead ground wire. Surge arresters have rather constant effect regardless of the type of lightning outage causes. On the other hand, the effect of an overhead ground wire is quite different against the two major causes: direct lightning hit and induced overvoltages. This paper shows how to design lightning protection for overhead power distribution lines taking these characteristics into account. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Comparison of Fatigue Strengths of Bulk Metallic Glasses Produced by Tilt Casting and High-Pressure Casting

High fatigue strength is one of the important factors that facilitates the industrial usage of bulk metallic glasses (BMGs). Fatigue data were analyzed using the Weibull probability models for BMGs produced with different casting processes in order to study the reliability of fatigue strengths of cast glassy alloys. The fatigue data of tilt-cast and high-pressure-cast BMGs can be explained by a three-parameter Weibull cumulative distribution function (cdf) and a mixture model of two-parameter Weibull cdfs, respectively. We conclude that the cast defects, which reduce fatigue strength, should be eliminated in order to realize a high reliability of fatigue strengths.     

Delay‐dependent robust stability analysis for interval neural networks with time‐varying delay

This article deals with the problem of robust stability for interval neural networks with time‐varying delay. By constructing an appropriate Lyapunov–Krasovskii functional, using the S‐procedure and taking the relationship among the time‐varying delay, its upper bound and their difference into account, some linear matrix inequality(LMI) ‐based delay‐dependent stability criteria are obtained without ignoring any terms in the derivative of the Lyapunov–Krasovskii functional. Finally, two numerical examples are given to demonstrate the effectiveness and benefits of the proposed method. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

New dissimilarity measure for recognizing noisy subsequence trees

Tree is a data structure used to express various objects such as semistructured data and genes. When objects are represented as trees, computing tree similarity is essential for pattern recognition and retrieval. This paper considers the noisy subsequence tree recognition problem whose purpose is to recognize the original tree, given its noisy subsequence tree. Previous research on this problem relied on constrained tree edit distance to measure the dissimilarity. However, the number of relabelings must be predetermined to compute it. This paper proposes a new dissimilarity measure for this problem. Our dissimilarity measure is obtained by counting the node edit operations included in the unit‐cost tree edit distance that contribute to the matching of node labels. The number of relabelings need not be specified to compute our dissimilarity measure. Moreover, our measure achieves more accurate recognition performance and faster execution speed than the constrained tree edit distance. Our measure is also useful to solve the tree inclusion problem which is the problem of deciding whether a tree includes another tree and shows the extent of approximate tree inclusion when a tree incompletely includes another tree. © 2011 Wiley Periodicals, Inc.     

The survey on ARM processors for HPC

The Journal of Supercomputing - The ongoing effort to reach the exascale computing barrier has led to a myriad of research and publications in the topic of alternative energy-efficient...     

Parametric polynomial spectral factorization using the sum of roots and its application to a control design problem

This paper presents an algebraic approach to polynomial spectral factorization, an important mathematical tool in signal processing and control. The approach exploits an intriguing relationship between the theory of Gröbner bases and polynomial spectral factorization which can be observed through the sum of roots, and allows us to perform polynomial spectral factorization in the presence of real parameters. It is discussed that parametric polynomial spectral factorization enables us to express quantities such as the optimal cost in terms of parameters and the sum of roots. Furthermore an optimization method over parameters is suggested that makes use of the results from parametric polynomial spectral factorization and also employs two quantifier elimination techniques. This proposed approach is demonstrated in a numerical example of a particular control problem.