Assessment of fiber arrangement and contiguity in composite materials by image analysis

The overall objective of this research was to correlate the processing—fiber arrangement—properties relationships of composites. In order to do this, an experimental technique to quantitatively characterize the fiber arrangement was developed. Using this technique, the compression molded graphite/epoxy composites, CMC, were found to have a standard deviation of fiber spacing of about twice the value of those from the simulated random composites, SRC. The standard deviation of fiber volume fraction for CMC was about 4 times the value of SRC. In other words, the fibers in this laboratory CMC were poorly distributed relative to SRC.     

Decision rules for determining terrestrial movement and the consequences for filtering high-resolution global positioning system tracks: a case study using the African lion (Panthera leo)

The combined use of global positioning system (GPS) technology and motion sensors within the discipline of movement ecology has increased over recent years. This is particularly the case for instrumented wildlife, with many studies now opting to record parameters at high (infra-second) sampling frequencies. However, the detail with which GPS loggers can elucidate fine-scale movement depends on the precision and accuracy of fixes, with accuracy being affected by signal reception. We hypothesized that animal behaviour was the main factor affecting fix inaccuracy, with inherent GPS positional noise (jitter) being most apparent during GPS fixes for non-moving locations, thereby producing disproportionate error during rest periods. A movement-verified filtering (MVF) protocol was constructed to compare GPS-derived speed data with dynamic body acceleration, to provide a computationally quick method for identifying genuine travelling movement. This method was tested on 11 free-ranging lions (Panthera leo) fitted with collar-mounted GPS units and tri-axial motion sensors recording at 1 and 40 Hz, respectively. The findings support the hypothesis and show that distance moved estimates were, on average, overestimated by greater than 80% prior to GPS screening. We present the conceptual and mathematical protocols for screening fix inaccuracy within high-resolution GPS datasets and demonstrate the importance that MVF has for avoiding inaccurate and biased estimates of movement.     

An in situ infrared study of NO reduction by C3H8 over Fe‐ZSM‐5

The interactions of NO, O₂ and NO₂ with Fe‐ZSM‐5, as well as the reduction of NO by C₃H₈ in the presence of O₂, have been investigated using in situ infrared spectroscopy. The sample of Fe‐ZSM‐5 (Fe/Al =0.56) was prepared by solid‐state ion exchange. NO adsorption in the absence of O₂ produces only mono‐ and dinitrosyl species associated with Fe²⁺ cations. Adsorbed NO₂/NO₃ species are formed via the reaction of adsorbed O₂ with gas‐phase NO or by the adsorption of gas‐phase NO₂. The reduction of NO in the presence of O₂ begins with the reaction of gas‐phase C₃H₈ with adsorbed NO₂/NO₃ species to form a nitrogen‐containing polymeric species. A reaction pathway is proposed for the catalyzed reduction of NO by C₃H₈ in the presence of O₂. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of hydrogen treatment on the porous structure of Al2O3-SnO2 system

The results of an investigation of the porous structure of the Al₂O₃-SnO₂ system and its properties after hydrogen treatment are presented. Pore size distribution was determined on the basis of low temperature nitrogen adsorption measurements. Reduction of the system by H₂ leads to a decrease of the parameters defining porous structure. We conclude that this is due to the reduction of Sn(IV) species to oxidation state II.     

Low temperature plasma surface alloying of medical grade austenitic stainless steel with carbon and nitrogen

Low temperature surface alloying with either nitrogen (nitriding) or carbon (carburizing) has been successfully employed in hardening AISI 316. However, little work has been directed towards low temperature plasma surface alloying with both nitrogen and carbon simultaneously. In addition, little or no research has been conducted on the surface modification of medical grade austenitic stainless steels, such as ASTM F138 and F1586. In this study, plasma surface alloying treatments have been conducted on medical grade ASTM F138 and ASTM F1586 as well as on engineering grade AISI 316 for comparison. Systematic materials characterization was carried out using optical microscopy, GDOES and XRD. The surface properties such as hardness, wear and corrosion of the modified surface layers were evaluated. Based on the results, the response of these materials to simultaneous plasma surface alloying with both nitrogen and carbon is compared with nitriding and carburizing processes.     

Disinfecting action of a new multi-purpose disinfection solution for contact lenses.

The disinfection activity of a new multipurpose disinfection solution (OPTI-FREE Express with ALDOX) was compared to several other contact lens disinfecting solutions. The new solution is preserved with polyquaternium-1 and myristamidopropyl dimethylamine. The other solutions included 3% hydrogen peroxide systems and multipurpose solutions (MPS) preserved with polyhexamethylene biguanide. The products were tested for antimicrobial activity against Staphylococcus spp., Pseudomonas aeruginosa, Serratia marcescens, Candida albicans, Fusarium solani, and Aspergillus fumigatus. OPTI-FREE Express provided a broader range of antimicrobial activity than the MPS. It provided activity similar to that demonstrated by 3% hydrogen peroxide systems, but unlike the hydrogen peroxide system tested, it also prevented re growth of the organisms during extended storage.     

Thermal and Optical Properties of Yb3+- and Nd3+-Doped Phosphate Glasses Determined by Thermal Lens Technique

In this work, we study the thermal and optical properties of ion-doped phosphates glasses using the thermal lens (TL) technique. Three samples were characterized: Nd³⁺-doped Q-98; Nd³⁺-doped Q-100; and Yb³⁺-doped QX. We report multiwavelength TL measurements for a more accuracy determination of the fluorescence quantum efficiency and temperature coefficient of the optical path length change (ds/dT). In Nd-doped glasses, it was carried out using four discrete excitation wavelengths (between 514 and 872 nm) chosen to match with the ion absorption lines. In Yb-doped glass, the spectrum of heat generated along the Yb³⁺ transition (² F _5/2rarr² F _7/2) was obtained. In addition, parameters as thermal diffusivity and conductivity, thermal loading, etc were achieved. The advantages to obtain fluorescence quantum efficiency using the TL technique, mainly in Yb³⁺ doped materials, which are normally overestimated due to radiation trapping effect, are presented. The accuracy knowledge of these parameters is very important for design of high-power solid-state lasers, since these properties are directly related to the heat generation.     

Hourly care received by people with Alzheimer's disease: results from an urban, community survey

People with Alzheimer's disease living in a defined community in New York City were identified and assessed on two occasions to determine the number of hours of activities of daily living (ADL) care they received. Nearly half received all care hours from informal sources; however, a quarter received all ADL care hours from formal sources. The mean number of daily ADL hours in the sample was 9.7, of which 4.2 came from formal sources. This reflects the extensive use of Medicaid-based home care services in New York City. As dementia worsened, substitution of formal for informal care was rare, but formal care assumed a greater proportion of total care hours.     

The dimensionality of schizophrenia concepts in first-episode psychosis

OBJECTIVE: To evaluate the efficacy of unreamed retrograde intramedullary (IM) nailing of fractures of the femoral shaft in a second series of patients using modifications suggested from our initial study. DESIGN: Prospective. SETTING: Level I trauma center. METHODS: Based on the findings of a previous study, we began a clinical series incorporating changes consisting of (a) inclusion of any patient with a femoral shaft fracture amenable to IM nailing (i.e., closed physes), (b) primary use of a split patellar tendon intercondylar distal femoral entry portal, and (c) the use of a full-length femoral implant having variable size availability and dynamization capability. Over a twelve-month period, thirty-four patients with thirty-five femoral shaft fractures were treated. The protocol called for planned dynamization in statically locked stable fractures and unstable fractures showing minimal healing at six to twelve weeks. Functional outcome was assessed by using the Knee Society clinical rating system. RESULTS: Incorporating the concepts of canal fill and early dynamization, there were only two nonunions (6 percent) in this series as compared with 14 percent in the previously reported series with an overall shorter time to union (12.6 versus 15 weeks). There were no infections or malunions. Postoperative complaints of knee pain were minimal (knee score average: 98 points) and knee function was excellent (knee score average: 97 points). CONCLUSIONS: Although not advocated as a replacement for other techniques, unreamed retrograde nailing is presented as a safe and beneficial fracture fixation method that should be added to the orthopaedic surgeon's treatment armamentarium. The operative technique is quick and simple, and blood loss is minimal. Early nail dynamization and early weight-bearing are important in minimizing the risk of nonunion.     

Is endoluminal abdominal aortic aneurysm repair using an aortoaortic (tube) device a durable procedure?

BACKGROUND: Controversies over the frequency and intensity of the follow-up care of breast cancer patients exist. Some physicians have adopted an intensive approach to follow-up care that consists of frequent laboratory tests and routine imaging studies, including chest radiographs, bone scans, and CT scans, whereas others have established a minimalist approach consisting of only history, physical examinations, and mammograms. OBJECTIVES: Our objective was to evaluate the role of intensive follow-up on detection of breast cancer recurrence and to examine the impact of follow-up on overall survival. METHODS: During a 10-year period (1986-1996), 129 patients with recurrent disease were identified from a prospective database of 1898 breast cancer patients. The patients with recurrent disease were divided into minimalist or intensive groups according to method of detection. RESULTS: Twenty-seven of 126 (21%) patients were assigned to the intensive method of detection group (LFT, CEA, CA 15-3, chest radiograph, CT scan, and bone scan); 99 of 126 (79%) patients were assigned to the minimal detection group (history, physical examination, and mammography). Distant disease to the bone was the most common initial tumor recurrence, at 27%. History, physical examination, and mammography detected recurrent cancer in approximately the same amount of time as LFTs, tumor markers, CT scans, and chest radiographs (P = .960). When the recurrent patients were divided into intensive and minimalist groups and analyzed by time to detection of recurrence, there was no significant difference between the time to detection in those recurrences detected by intensive methods and those recurrences detected by minimalist methods (P = .95). The independent variables age, tumor size, type of surgery, number of positive nodes, time to recurrence, method of detection, and site of recurrence (regional or distant) were subject to univariate and multivariate analysis by the Cox proportional hazards model. Only two variables had an impact on survival by multivariate analysis: early timing of the recurrence (P = .0011) and the site of the recurrence (P = .02). Timing was defined as early (< or =365 days from the time of diagnosis to recurrence) or late (> or =365 days from the time of diagnosis to recurrence). Early recurrence was the first variable found to be significant on stepwise forward regression analysis. The primary site of recurrence was significant at step two. The method of detection--intensive or minimal--did not significantly affect survival (P = .18). CONCLUSIONS: There is no survival benefit to routine intensive follow-up regimens in detecting recurrent breast cancer. Expensive diagnostic tests such as bone scans, CT scans, and serial tumor markers are best used for detection of metastasis in symptomatic patients.