Experimental study of neutron induced background noise on gated x-ray framing cameras

A temporally gated x-ray framing camera based on a proximity focus microchannel plate is one of the most important diagnostic tools of inertial confinement fusion experiments. However, fusion neutrons produced in imploded capsules interact with structures surrounding the camera and produce background to x-ray signals. To understand the mechanisms of this neutron induced background, we tested several gated x-ray cameras in the presence of 14 MeV neutrons produced at the Omega laser facility. Differences between background levels observed with photographic film readout and charge-coupled-device readout have been studied.     

Radiation hardening of gated x-ray imagers for the National Ignition Facility (invited)

The National Ignition Facility will soon be producing x-ray flux and neutron yields higher than any produced in laser driven implosion experiments in the past. Even a non-igniting capsule will require x-ray imaging of near burning plasmas at 10(17) neutrons, requiring x-ray recording systems to work in more hostile conditions than we have encountered in past laser facilities. We will present modeling, experimental data and design concepts for x-ray imaging with electronic recording systems for this environment (ARIANE). A novel instrument, active readout in a nuclear environment, is described which uses the time-of-flight difference between the gated x-ray signal and the neutron which induces a background signal to increase the yield at which gated cameras can be used.     

Effect of high-hydrostatic pressure and pH on the rheological properties of gum arabic

The effect on the viscoelastic behaviour, of pressure-treating hydrated gum arabic samples (800 MPa) at different pH values (2.8, 4.2 and 8.0) was investigated, using controlled stress rheometry. The treated samples were analysed for their complex (G∗), storage (G′) and loss (G″) moduli as a function of frequency, using dynamic oscillatory testing. Significant changes in the rheological properties were observed in both the pressurised gum solutions and in those previously buffered at pH 2.8. The gum, at its natural pH (4.25) and at alkaline pH (8.0), was enhanced by pressure treatment, but only for the already “good” quality gum samples. High-pressure treatment had substantial effects on the frequency-dependence of the moduli of both the pressurised and the pressurised/pH-treated solutions, with the latter being more pronounced, suggesting differing structures or changes in the overall degree of interaction of the gum systems after pressure treatment.     

Structural basis for the properties of two single-site proline mutants of CYP102A1 (P450BM3)

The crystal structures of the haem domains of Ala330Pro and Ile401Pro, two single‐site proline variants of CYP102A1 (P450_BM3) from Bacillus megaterium, have been solved. In the A330P structure, the active site is constricted by the relocation of the Pro329 side chain into the substrate access channel, providing a basis for the distinctive C? H bond oxidation profiles given by the variant and the enhanced activity with small molecules. I401P, which is exceptionally active towards non‐natural substrates, displays a number of structural similarities to substrate‐bound forms of the wild‐type enzyme, notably an off‐axial water ligand, a drop in the proximal loop, and the positioning of two I‐helix residues, Gly265 and His266, the reorientation of which prevents the formation of several intrahelical hydrogen bonds. Second‐generation I401P variants gave high in vitro oxidation rates with non‐natural substrates as varied as fluorene and propane, towards which the wild‐type enzyme is essentially inactive. The substrate‐free I401P haem domain had a reduction potential slightly more oxidising than the palmitate‐bound wild‐type haem domain, and a first electron transfer rate that was about 10 % faster. The electronic properties of A330P were, by contrast, similar to those of the substrate‐free wild‐type enzyme.     

Molecular-Level Analysis of Shock-Wave Physics and Derivation of the Hugoniot Relations for Fused Silica

Equilibrium and non-equilibrium molecular-dynamics simulations are employed in this study to investigate various aspects of shock waves in fused silica (a pure SiO₂ amorphous material used in transparent-armor applications). Equilibrium molecular-dynamics simulations are used first to validate that the initial (unshocked) fused silica possesses the appropriate mass density and microstructure (as characterized by its partial Si-Si, Si-O, and O-O radial distribution functions). Next, non-equilibrium molecular-dynamics simulations are employed, within a continuously contracting computational-cell scheme, to generate planar longitudinal (uniaxial motion) shocks of different strengths. By examining and quantifying the dynamics of shock-wave motion, the respective shock-Hugoniot relations (i.e., functional relations between various material-state variables in the material states produced by the shocks of different strengths) are determined. This methodology suggested that irreversible non-equilibrium deformation/damage processes play an important role in the mechanical response of fused silica to shock loading and that the ??equilibrium?? procedures for Hugoniot determination based on the equation of state and the Rankine-Hugoniot equation may not be fully justified. Finally, the non-equilibrium molecular-dynamics simulations were used to identify the main microstructure modifying/altering processes accompanying the shock-wave motion through fused silica.     

Minimization of Copper Losses in Copper Smelting Slag During Electric Furnace Treatment

In the quest to achieve the highest metal recovery during the smelting of copper concentrates, this study has evaluated the minimum level of soluble copper in iron-silicate slags. The experimental work was performed under slag-cleaning conditions for different levels of Fe in the matte and for a range of Fe/SiO₂ ratios in the slag. All experiments were carried out under conditions where three phases were present (copper?Cmatte?Cslag), which is the condition typically prevailing in many slag-cleaning electric furnaces. The %Fe in the electric furnace matte was varied between 0.5?wt.% and 11?wt.%, and two different Fe/SiO₂ ratios in the slag were used (targeted values were 1.4 and 1.6). All experiments were performed at 1200°C. From thermodynamic considerations, from industrial experience, and from the results obtained in this study, the minimum soluble copper content in the electric furnace slag is expected to be near 0.55?wt.% Cu. This level does not account for a portion of the copper present as mechanically entrained matte/metal droplets. Taking this into account, the current authors believe an overall copper level in discard slag between 0.7?wt.% and 0.8?wt.% can be obtained with optimal operating conditions. For these conditions, the copper losses in the slag are roughly 75% as dissolved copper and 25% as entrained matte and copper. Such conditions include operating the electric furnace at metallic copper saturation, maintaining the %Fe in the electric furnace matte between 6?wt.% and 9?wt.%, not exceeding a slag temperature of 1250°C, and controlling the Fe/SiO₂ ratio in the smelting furnace slag at ??1.5. In addition, magnetite reduction needs to be performed efficiently during the slag-cleaning cycle so as to maintain a total magnetite content of ??7?wt.% in the discard slag. The authors further consider that under exceptionally well-controlled conditions, a copper content in electric furnace discard slag between 0.55?wt.% and 0.7?wt.% can be obtained, by minimizing entrained matte and copper solubility in the discard slag.     

Electrochemical differentiation of epitope-specific aptamers

DNA aptamers are promising immunoshielding agents that could protect oncolytic viruses (OVs) from neutralizing antibodies (nAbs) and increase the efficiency of cancer treatment. In the present Article, we introduce a novel technology for electrochemical differentiation of epitope-specific aptamers (eDEA) without selecting aptamers against individual antigenic determinants. For this purpose, we selected DNA aptamers that can bind noncovalently to an intact oncolytic virus, vaccinia virus (VACV), which can selectively replicate in and kill only tumor cells. The aptamers were integrated as a recognition element into a multifunctional electrochemical aptasensor. The developed aptasensor was used for the linear quantification of the virus in the range of 500-3000 virus particles with a detection limit of 330 virions. Also, the aptasensor was employed to compare the binding affinities of aptamers to VACV and to estimate the degree of protection of VACV using the anti-L1R neutralizing antibody in a displacement assay fashion. Three anti-VACV aptamer clones, vac2, vac4, and vac6, showed the best immunoprotection results and can be applied for enhanced delivery of VACV. Another two sequences, vac5 and vac46, exhibited high affinities to VACV without shielding it from nAb and can be further utilized in sandwich bioassays.     

Non-destructive Moisture Content Measurement of Bioabsorbable Polymers Used in Medical Implants

Measurements have been made that link moisture content to the degradation of a bioabsorbable polymeric material, poly (dl-lactide-co-glycolide) (PLGA). Bioabsorbable polymers used in medical implants degrade and are absorbed into the body. In the course of degradation, these polymers absorb water. Progressive non-destructive laboratory measurements of moisture content can be used as a means of tracking changes in these materials over the course of their degradation. Measurements of moisture content were made using a non-destructive microwave resonance instrument. The measurement approach, more usually applied to granular materials, was adapted to measure small, individual solid samples that do not fill the conventional sample volume of the resonator. Using the microwave resonance technique, gains in moisture content were measurable in increasingly degraded samples. The results were confirmed using alternative (destructive) measurements of sample moisture content. The microwave resonance technique offers a non-destructive measurement that can be used to study the degradation characteristics of PLGA. Better understanding of the degradation process can enable the polymer break-down rate to be tailored to match the healing rate of tissue. Non-destructive measurement allows effective study using single rather than multiple samples. This is a strong advantage when novel materials under study may be either expensive or in strictly limited availability.     

Storage stability of tagatose in buffer solutions of various compositions

Tagatose is a minimally absorbed monosaccharide that has prebiotic properties. For this prebiotic effect to be achieved, tagatose should remain stable and not degrade during food processing and storage. This study evaluated the storage stability of tagatose in solutions as affected by buffer type, buffer concentration, pH, and temperature. Tagatose does degrade during storage. Minimal tagatose loss and browning were observed in 0.02 M phosphate and citrate buffers at pH 3. In 0.1 M buffers at pH 3 and 40 °C, approximately 5% tagatose was lost over 6 months and slight browning occurred. Tagatose degradation was enhanced at pH 7, especially in phosphate buffer, where it occurred faster than in citrate buffer. Higher buffer concentrations also enhanced tagatose loss. In phosphate buffers at pH 7, browning accompanied the tagatose degradation, increasing to a maximum and then decreasing. To deliver the prebiotic effect from tagatose, shelf-stable beverages should be formulated to the lowest buffer concentration and pH possible to optimize tagatose’s stability.