Critical review of models for H2-permeation through polymers with focus on the differential pressure method

To reduce loss of hydrogen in storage vessels with high energy-to-weight-ratio, new materials, especially polymers, have to be developed as barrier materials. Very established methods for characterization of barrier materials with permeation measurements are the time-lag and flow rate method along with the differential pressure method, which resembles the nature of hydrogen vessel systems very well. Long measurement durations are necessary to gain suitable measurement data for these evaluation methods, and often restrictive conditions have to be fullfilled. For these reasons, common models for hydrogen permeation through single-layer and multi-layer membranes, as well as models for hydrogen gas properties were collected and reviewed. Using current computer power together with these models can reduce measurement time for characterization of the barrier properties of materials, while additional information about the quality of the measurement results is obtained.     

Rheology and colloidal structure of silver nanoparticles dispersed in diethylene glycol

Rheological behavior of agglomerated silver nanoparticles (~ 40 nm) suspended in diethylene glycol over a wide range of volumetric solids concentrations (? = 0.11–4.38%) was studied. The nanoparticle suspensions generally exhibited a yield pseudoplastic behavior. Bingham plastic, Herschel–Bulkley and Casson models were used to evaluate the shear stress-shear rate dependency. Analyzing the effect of silver concentrations on the yield stress and viscosity of the suspensions followed an exponential form, revealing an increase in the degree of interparticle interactions with increasing solid concentrations. Fractal dimension (D_f) was estimated from the suspension yield stress and ? dependence, and was determined as D_f = 1.51–1.62 for the flocculated nanoparticle suspensions. This suggested that the suspension structure was probably dominated by the diffusion-limited cluster–cluster aggregation (DLCA) due mostly to the strong attractions involved in the interparticle potentials. Maximum solids concentration of the suspensions was determined to be ?_m = 11%.     

Optimizing substrate surface and catalyst conditions for high yield chemical vapor deposition grown epitaxially aligned single-walled carbon nanotubes

Single-crystal stable-temperature (ST)-cut quartz substrates, which have a (0 1 1 1) crystallographic plane with their surface normal lying close to 38° from the y axis ([0 1 0]), were annealed in air prior to use as a support for aligned carbon nanotube growth by chemical vapor deposition. Very smooth substrate surfaces were obtained with annealing times in the vicinity of 15 h at a temperature of 750 °C. These smooth surfaces are ideal for the growth of horizontally aligned SWCNTs with high spatial density, while less dense SWCNTs were obtained with less smooth surfaces. Under optimized growth conditions, only SWCNT are observed and they can grow to lengths in excess of 100 μm. Our findings suggest structural defects interfere with the growth process. A binary Fe/Co catalyst was employed to grow the nanotubes. No obvious dependence on the Fe:Co ratio is observed.     

Discovery of a Short‐Chain Dehydrogenase from Catharanthus roseus that Produces a New Monoterpene Indole Alkaloid

Plant monoterpene indole alkaloids, a large class of natural products, derive from the biosynthetic intermediate strictosidine aglycone. Strictosidine aglycone, which can exist as a variety of isomers, can be reduced to form numerous different structures. We have discovered a short‐chain alcohol dehydrogenase (SDR) from plant producers of monoterpene indole alkaloids (Catharanthus roseus and Rauvolfia serpentina) that reduce strictosidine aglycone and produce an alkaloid that does not correspond to any previously reported compound. Here we report the structural characterization of this product, which we have named vitrosamine, as well as the crystal structure of the SDR. This discovery highlights the structural versatility of the strictosidine aglycone biosynthetic intermediate and expands the range of enzymatic reactions that SDRs can catalyse. This discovery further highlights how a sequence‐based gene mining discovery approach in plants can reveal cryptic chemistry that would not be uncovered by classical natural product chemistry approaches.     

Layer‐by‐layer assembled polyelectrolyte blend membranes and their use for ion separation and rejection

Polyelectrolyte blend films and membranes were prepared upon alternating electrostatic adsorption of polyallylamine hydrochloride (PAH) and mixtures of polystyrene sulfonate (PSS) and polyacrylic acid (PAA) in different ratio on solid supports. Infrared studies indicated that the PSS‐PAA blend composition of the films always differed from the mixture composition in the dipping solution, PSS being preferentially adsorbed. Films deposited on porous supporting membranes (polyacrylonitrile/polyethylene terephthalate) were studied on their ion permeation under diffusion dialysis conditions, and their flux and salt rejection under nanofiltration and reverse osmosis (RO) conditions. Blend membranes prepared at pH 1.7 exhibit a significantly improved anion separation and salt rejection, the ideal separation factor α(NaCl/Na₂SO₄) of a membrane prepared from a PSS:PAA mixture of 1:1 (w/w) being 197 ± 10 (pure PAH/PSS: 45). The NaCl and Na₂SO₄ rejections under RO conditions are 85 and 97% (pure PAH/PSS: 15 and 27%), respectively. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

New calix[4]arenedimethacrylate derivatives for dental composites

Calix[4]arenes were double alkylated with various alkylhalogenides and the residual OH functions were subsequently dimethacrylated with methacryloyl chloride. The successful synthesis of polymerizable calixarenes was proved using ¹H NMR spectroscopy, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry and differential scanning calorimetry. The polymerization behaviour was confirmed by copolymerization with methacrylic acid methyl ester. Furthermore, the flexural strength, the flexural modulus of elasticity, the exothermic course of the photo‐curing reaction and the polymerization shrinkage of experimental dental filling composites containing the modified calixarenes were evaluated. Copyright © 2012 Society of Chemical Industry     

Methacrylated calix[4]arene phosphonic acids as functionalized crosslinker for radical polymerization

We describe the synthesis of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dioxypropylphosphonic acid‐26,28‐dimethacryloyloxy‐calix [4]arene and 5,11,17,23‐tetra‐tert‐butyl‐25‐oxypropylphosphonic acid‐27‐hydroxy‐26,28‐dimethacryloyloxy‐calix[4]arene starting from para‐tert‐butyl‐calix[4]arene. The complete reaction was proved by matrix‐assisted laser desorption ionization time of flight mass spectrometry and nuclear magnetic resonance spectroscopy. The influence of these compounds on the kinetics of the radical polymerization of methyl methacrylate was shown by dilatometry. Furthermore, the adhesive properties of dental adhesives containing these calix[4]arene derivatives were investigated. Copyright © 2012 Society of Chemical Industry     

Design and Characterization of a New pVII Combinatorial Phage Display Peptide Library for Protease Substrate Mining Using Factor VII Activating Protease (FSAP) as Model

We describe a novel, easy and efficient combinatorial phage display peptide substrate-mining method to map the substrate specificity of proteases. The peptide library is displayed on the pVII capsid of the M13 bacteriophage, which renders pIII necessary for infectivity and efficient retrieval, in an unmodified state. As capture module, the 3XFLAG was chosen due to its very high binding efficiency to anti-FLAG mAbs and its independency of any post-translational modification. This library was tested with Factor-VII activating protease (WT-FSAP) and its single-nucleotide polymorphism variant Marburg-I (MI)-FSAP. The WT-FSAP results confirmed the previously reported Arg/Lys centered FSAP cleavage site consensus as dominant, as well as reinforcing MI-FSAP as a loss-of-function mutant. Surprisingly, rare substrate clones devoid of basic amino acids were also identified. Indeed one of these peptides was cleaved as free peptide, thus suggesting a broader range of WT-FSAP substrates than previously anticipated.     

RAFT-derived polymer-drug conjugates: poly(hydroxypropyl methacrylamide) (HPMA)-7-ethyl-10-hydroxycamptothecin (SN-38) conjugates

A series of well‐defined polymer–drug conjugates were prepared in order to modify the physical properties of a known cytotoxic drug, 7‐ethyl‐10‐hydroxycamptothecin (SN‐38), the active metabolite of irinotecan (CPT‐11). Reversible addition–fragmentation chain transfer (RAFT) polymerisation was used to covalently and site‐specifically append a defined N‐(2‐hydroxypropyl)methacrylamide (HPMA) polymer to SN‐38 using a graft‐from process. These poly‐HPMA–SN‐38 conjugates displayed excellent aqueous solubility and stability, whilst retaining the cytotoxic activity of the parent SN‐38. In vitro co‐culture assays containing both cancer and noncancer cell lines demonstrated the specificity of RAFT‐derived poly‐HPMA–SN‐38 conjugates for cancerous cells. The concept of post‐optimisation modification of small‐molecule drugs through a graft‐from polymer conjugation method is introduced.