Assay of oral vaccination of dogs against rabies in Tunisia with the vaccinal strain SADBern

The possibility of immunizing dogs orally against rabies, using SADBern, an attenuated strain, was tested on dogs in the field in Tunisia. This strain induced high neutralizing antibody titres and conferred to all vaccinated dogs total resistance against a challenge with a Maghrebian strain. However, an excretion of virus of vaccinal origin was observed in one dog, hampering the use of SADBern in dogs. Nevertheless, this work demonstrates for the first time that dogs in developing countries, especially those which are inaccessible to parenteral vaccination, could be efficiently immunized against rabies by the oral route.     

基于过程能量综合优化的延迟焦化装置扩大生产能力改造策略

根据延迟焦化流程的特点，分析了延迟焦化装置扩大生产能力的瓶颈，探讨了基于能量综合优化的装置扩能解除瓶颈的策略方法，基于过程能量综合优化，运用流程模拟技术，通过配套的加热炉优化，分馏塔操作优化，换热网络柔性设计等手段，实现了装置扩大生产能力的目的，并运用所提出的策略对某延迟焦化装置进行了基于能量系统优化的扩能改造，在原流程与设备的基础上，装置处理量增大18．2％，装置物耗，能耗大幅度降低，改造设备投资少，说明能量综合优化对工艺装置扩能改造具有重要意义。     

A new boundary finite element method for fluid–structure interaction problems

In order to study problems on fluid–structure interaction, we have used a mixed formulation which couples the classical functional of the structure with a new variational formulation by integral equations for the fluid. This formulation has the advantage over the finite element methods of avoiding the discretization of the fluid domain. Furthermore, unlike collocation methods, the explicit calculation of the Hadamard finite part of the singular integrals is avoided. This leads after discretization by boundary finite elements to a small and symmetrical algebraic system. Typical examples are presented that demonstrate the efficiency of this variational formulation by studying the sound transmission through a baffled plane structure and through a flexible panel backed by a rigid cavity. These include the calculation of the transmission loss factor and the determination of which modes dominate the noise transmission. Good agreement is obtained between numerical results and analytical results found in the literature.     

Influence of the ethylene–(methacrylic acid)–Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene–(vinyl alcohol) copolymer (EVOH)

The thermal and mechanical properties and the morphologies of blends of poly(propylene) (PP) and an ethylene–(vinyl alcohol) copolymer (EVOH) and of blends of PP/EVOH/ethylene–(methacrylic acid)–Zn²⁺ ionomer were studied to establish the influence of the ionomer addition on the compatibilization of PP/EVOH blends and on their properties. The oxygen transmission rate (O₂TR) values of the blends were measured as well. PP and EVOH are initially incompatible as was determined by tensile tests and scanning electronic microscopy. Addition of the ionomer Zn²⁺ led to good compatibility and mechanical behaviour was improved in all blends. The mechanical properties on extruded films were studied for 90/10 and 80/20 w/w PP/EVOH blends compatibilized with 10 % of ionomer Zn²⁺. These experiments have shown that the tensile properties are better than in the injection‐moulded samples. The stretching during the extrusion improved the compatibility of the blends, diminishing the size of EVOH domains and enhancing their distribution in the PP matrix. As was to be expected, the EVOH improved the oxygen permeation of the films, even in compatibilized blends. Copyright © 2004 Society of Chemical Industry     

Comparing word fragment completion and cued recall with letter cues.

Cued recall with word stems as cues and fragment completion rely on different types of letter cues and also differ in the explicit–implicit nature of the retrieval orientation. Despite these differences, variables effective in one task may be effective in the other because both rely on letter cues. Two variables known to affect cued recall were manipulated: Lexical set size (number of words that fit the letter cue) and meaning set size (number of associates generated to the studied words). Across four experiments, subjects in each task were less likely to recover targets from larger lexical sets. However, meaning set size affected cued recall but not fragment completion. These results indicate that fragment completion and letter-cued recall are based on lexical search but that cued recall also involves a semantic search component. Furthermore, type of retrieval cue had a greater effect than type of retrieval orientation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Study of hot air generator with quasi-uniform temperature using concentrated solar radiation: Influence of the shape parameters

The non-uniformity of the air temperatures and the slow flow rate at the plane collector exit constitute the main cause of the limitations of the solar drying systems. In order to obtain an uniform and a variable flow rate for different uses, a hot air generator using concentrated solar radiation is proposed. To improve the thermal efficiency of the generator, a study of the influence of different shape parameters is realized. The generator is simulated in the laboratory while investigating the flow induced by a circular disc heated uniformly by Joule effect at constant temperature. This disc is placed at the entrance of an open ended vertical cylinder of a larger diameter. Thermal radiation emitted by the hot disc heats the cylinder wall. The heating of the fluid at the cylinder-inlet generates a thermosiphon flow around the one created by the hot disc. The comparison of the velocity and the temperature profiles of the resulting flow permits to determine the influence of the cylinder height, the vertical source-cylinder spacing and the radius ratio, on the resulting flow at the system exit. Thus, a judicious choice of the shape parameters entails an improvement of the flow rate as well as the thermal flux absorbed by the air and a good homogenization of the air temperature at the generator exit.     

Parametric modeling of somatosensory evoked potentials

In this paper, we examine methods of characterizing somatosensory evoked potentials (SEP's) in both the time and frequency domains. We have found that the truncated impulse response (TIR) method produced an accurate time domain model of the SEP signals at model orders greatly reduced from the original state space matrix. The TIR method was valuable for smoothing signals that were slightly corrupted by noise. In this case, the simulated data sequence was close to the original data sequence in the mean squared error sense. For signals that were greatly corrupted by noise, the TIR method was not able to perform as well. Therefore, the TIR method was not a feature extraction method but was valuable for data simulation. In the frequency domain, we have used the autoregressive moving average model (ARMA) to parameterize the SEP signal. An overdetermined set of Yule-Walker equations was created to determine the autoregressive (AR) parameters of the original data with the model order established by the singular value decomposition. From these AR parameters, a residual time series was generated which was used to find the moving average parameters. The resulting ARMA model was used to produce a simulated data sequence. The frequency domain characteristics of the simulated sequence and the corresponding power spectral density of the ARMA filter were very close to the periodogram of the original data sequence. Accurate parameterization was achieved for the SEP waveforms at low filter lengths.     

Gyrotron coaxial cylindrical resonators with corrugated innerconductor: Theory and experiment

Gyrotron coaxial resonators with a longitudinally slotted inner cylinder are examined analytically using a surface impedance model, from which expressions for the electromagnetic field, ohmic quality (Q) factor, and characteristic equation of the transverse eigenvalues χ _m,p are obtained. The major attributes of such resonators are expressed by the dependence of χ_m,p on the parameter C-defined as the ratio of the outer to inner radii of the coaxial structure. In that connection, the effect of the corrugation parameters on χ_m,p is particularly investigated on the basis of an expression derived for the slope function dχ_m,p,p/dC. It is shown that the χ_m,p(C) curve may either exhibit oscillatory behavior or present a flat portion over a wide range of C depending on the corrugation parameters chosen. The theory is checked against experiment in which resonant frequencies and total Q factors were measured for TE modes operating in the range of 8-16 GHz in a coaxial cavity with 40 slots. Good agreement is found in that the magnitude of the relative error in frequency is less than 0.5%. Corrugated coaxial resonators prove to be relevant to megawatt gyrotrons where highly selective cavities are required to ensure high conversion efficiency