Multi-scale modelling of silicon nanocrystal synthesis by Low Pressure Chemical Vapor Deposition

A multi-scale model has been developed in order to represent the nucleation and growth phenomena taking place during silicon nanocrystal (NC) synthesis on SiO₂ substrates by Low Pressure Chemical Vapor Deposition from pure silane SiH₄. Intrinsic sticking coefficients and H₂ desorption kinetic parameters were established by ab initio modelling for the first three stages of silicon chemisorption on SiO₂ sites, i.e. silanol Si―OH bonds and siloxane Si―O―Si bridges. This ab initio study has revealed that silane cannot directly chemisorb on SiO₂ sites, the first silicon chemisorption proceeds from homogeneously born unsaturated species like silylene SiH₂. These kinetic data were implemented into the Computational Fluid Dynamics Fluent code at the industrial reactor scale, by activating its system of surface site control in transient conditions. NC area densities and radii deduced from Fluent calculations were validated by comparison with experimental data. Information about the deposition mechanisms was then obtained. In particular, hydrogen desorption has been identified as the main limiting step of NC nucleation and growth, and the NC growth rate highly increases with run duration due to the autocatalytic nature of deposition.     

Charging kinetics in virgin and 1 MeV-electron irradiated yttria-stabilized zirconia in the 300–1000 K range

A study performed with a dedicated scanning electron microscope (SEM) on the surface electrical properties of (1 0 0)-oriented yttria-stabilized zirconia (YSZ) single crystals irradiated with 1 MeV electrons is presented. When compared with virgin YSZ, the 1 MeV-irradiated YSZ shows a decrease of the intrinsic total electron emission coefficient σ₀ and an increase of the time constant τ associated with the charging kinetics of the material at room temperature. These measurements performed with the SEM beam at 10 keV indicate that the defects induced by the 1 MeV-electron irradiation generate a positive electric field of the order of 0.5 × 10⁶ V/m at a depth of about 1 μm that prevents electrons to escape. When the SEM beam with a 1.1 keV energy is used, a smaller field (0.5 × 10³ V/m) is detected closer to the surface (20 nm). The fading of these fields during the thermal annealing in the 400–1000 K temperature range provides information on the nature of defects induced by the 1 MeV-electron irradiation.     

Direct evidence for dissociated megakaryocytic chimaerism in a Wiskott-Aldrich patient successfully allografted

We report a Wiskott-Aldrich patient who underwent allogeneic bone marrow transplantation from his HLA-identical sister at the age of 25. Conditioning regimen consisted of cyclophosphamide (180 mg/kg) and thoraco-abdominal irradiation (6 Grays). Cytogenetic follow-up revealed rapid and complete lymphoid chimaerism, but prolonged mixed bone marrow chimaerism. Correlative interphase cytogenetics performed on bone marrow smears using dual-colour fluorescence in situ hybridization with X and Y specific probes showed that the proportion of donor cells was significantly higher within megakaryocytes than in other lineages. This patient therefore presented with dissociated lineage engraftment, which is not exceptional in congenital diseases and aplastic anaemia, but has not previously been described in Wiskott-Aldrich syndrome. Bone marrow transplantation was successful despite this delayed engraftment which ensured adequate production in the involved cell lines.     

A new 3-D finite-element model based on thin-film approximation for microelectrode array recording of extracellular action potential.

A transient finite-element model has been developed to simulate an extracellular action potential recording in a tissue slice by a planar microelectrode array. The thin-film approximation of the active neuron membrane allows the simulation within single finite-element software of the intracellular and extracellular potential fields. In comparison with a compartmental neuron model, it is shown that the thin-film approximation-based model is able to properly represent the neuron bioelectrical behavior in terms of transmembrane current and potential. Moreover, the model is able to simulate extracellular action potential recordings with properties similar to those observed in biological experiments. It is demonstrated that an ideal measurement system model can be used to represent the recording microelectrode, provided that the electronic recording system adapts to the electrode-tissue interface impedance. By comparing it with a point source approximated neuron, it is also shown that the neuron three-dimensional volume should be taken into account to simulate the extracellular action potential recording. Finally, the influence of the electrode size on the signal amplitude is evaluated. This parameter, together with the microelectrode noise, should be taken into account in order to optimize future microelectrode designs in terms of the signal-to-noise ratio.     

Evaluation of the systematic use of wide lumen 6 French guiding catheters in conventional coronary angioplasty

The aim of this study was to evaluate the results of systematic use of 6 French guiding catheters in conventional balloon coronary angioplasty without any restriction of indications apart from coronary lesions necessitating other techniques such as atherectomy. Therefore, after a learning period, 200 consecutive procedures performed between November 1993 and June 1994 for the treatment of 234 lesions were analysed prospectively. Fifty-one patients had stable and 70 unstable angina. In 79 cases, the angioplasty was performed on the culprit lesion of a myocardial infarction. An angiographic success was obtained for 206 lesions or 88% of cases which increased to 95% after exclusion of attempted recanalisation. There were 3 cases of damage to the ostium and 7 patients underwent implantation of a stent with the same catheter for occlusive or threatening dissection. There were 10 ischaemic complications (5%) (7 non-Q wave infarctions, 2 Q wave infarctions, 1 aorto-coronary bypass, no deaths) and 8 local complications at the site of arterial catheterisation during the hospital period. These results demonstrate the feasibility of coronary angioplasty with wide lumen 6 French guiding catheters and show that they amy be used in first intention for all conventional balloon angioplasty procedures.     

High-dose chemotherapy followed by reinfusion of selected CD34+ peripheral blood cells in patients with poor-prognosis breast cancer: a randomized multicentre study

Seven chlorine-containing orcinol derivatives (2-8) and orcinol (9) have been isolated from diseased bulbs of the edible lily Lilium maximowiczii, and their structures have been elucidated. Six of the chlorinated orcinol derivatives (2, 4-8) showed antifungal activity. Because organochlorine compounds are rare in terrestrial higher plants, their biosynthetic origin was examined. These compounds were shown to be induced in intact bulb scales by UV irradiation or by inoculation with the pathogenic fungus Fusarium oxysporum f. sp. lilii. Biosynthetic studies suggested that these "natural organochlorine pesticides" are produced by enzymatic chlorination of orcinol (9) with chloroperoxidase and hydrogen peroxide, which are both induced in the plant tissue under stress conditions.     

Ammonia volatilization from urea as affected by the addition of iron pyrites and method of application

Laboratory incubations were conducted to determine the ammonia (NH₃) loss from urea as affected by the addition of coarse and ground (fine) pyrites at 1:1, 1:2 and 1:5 urea: pyrite (w/w) ratios and methods of application (surfaceapplication, incorporation and placement). Coarse pyrites (>-2mm) were not effective in reducing NH₃ loss from urea when surface applied even at the highest ratio of pyrite (15.9% vs 18.7% without pyrite). Ground pyrites (0.1–0.25 mm), in 1:1 ratio, had about 5% less NH₃ loss than the urea alone treatment. Higher ratios of pyrites reduced NH₃ loss much more. Ammonia losses were the most with surface-applied urea (18.9%) and the least (13.5%) when placed (2.5 cm) below the soil surface. Addition of ground pyrite to surface-applied urea (1:1 ratio) decreased the loss to 13.2%. Urea+pyrite placed below the soil surface had the least loss (9.8%). Results indicate that combined application of urea and fine pyrite could reduce NH₃ loss.     

The Impact of Kilning on Enzymatic Activity of Buckwheat Malt

This study investigated the impact of kilning on α‐amylase, β‐amylase (total and soluble), β‐glucanase and protease activities in buckwheat malt. Common buckwheat (Fagopyrum esculentum) was steeped at 10°C for 12 h, germinated at 15°C for 4 days and kilned at 40°C for 48 h. Moisture content and enzymatic activities were determined throughout the kilning period. Results showed moisture content was reduced from 44% to 5% after 48 h of kilning at 40°C. β‐Amylase was found to exist in a soluble and latent form in buckwheat. Maximum activity of (a) α‐amylase, (b) total β‐amylase, (c) soluble β‐amylase, (d) β‐glucanase and (e) protease activity occurred after (a) 8, (b) 7, (c) 30, (d) 0, and (e) 8 h of kilning, respectively. The final malt exhibited very little β‐glucanase and cellulase activity. Proteolytic activity was low in buckwheat malt when compared to the barley malt control. All enzymatic activities were found to decrease during the kilning stage. Results indicated that after prolonged kilning at 40°C, inactivation of hydrolytic enzymes occurred; two‐stage kilning for shorter periods is recommended. Although, amylolytic activity was low in malted buckwheat, buckwheat malt shows potential as an ingredient for the brewing and cereal industry.     

Hepatic metallothionein level and mixed function oxidase activity in fingerling rainbow trout (Oncorhynchus mykiss) after acute exposure to pulp and paper mill effluents

Hepatic metallothionein (MT) levels and mixed function oxidase (MFO) activity (7-ethoxyresorufin-o-deethylase or EROD) were measured in fingerling rainbow trout (Oncorhynchus mykiss) exposed to sublethal concentrations of 12 pulp and paper effluents, after completion of 96 h static acute lethality assays. Barring one primary-treated effluent where MFO levels were significantly depressed and two secondary-treated effluents where no significant MFO induction were observed, all other effluents triggered significant induction of MT and EROD, regardless of mill process/treatment or of effluent lethality and chemical characteristics. MT and EROD inductions were significant, however, at higher concentrations for secondary-treated effluents than for primary-treated ones. Lethal (96 h LC₅₀s) to sublethal (MT and EROD lowest observable effect concentrations) ratios were variable and indicated that significant biochemical effects were present at effluent concentrations that were roughly 4–33 (MT) and 3–59 (EROD) times lower than the LC₃₀. Enzyme induction ranged from 1.3 to 2.5-fold for MT and from 1.3 to 9.4-fold for EROD compared to controls. Limited chemical data available suggest that there were indeed classes of compounds present capable of inducing MT or EROD. Observed patterns of MT/MFO responses also suggest that contaminant interactions may have interfered with induction for some of the effluents studied. Refinements of this combined (sub)lethal bioassay procedure are envisaged to determine whether it can provide an efficient means of detecting hazardous chemicals in industrial wastewaters.