Direct atomic scale analysis of the distribution of Cu valence states in Cu/γ-Al2O3 catalysts

In this paper, the microstructure of a 1 wt.% Cu/γ-Al₂O₃ catalyst that was reduced in a 4% hydrogen/argon atmosphere at temperatures of 523, 773 and 1073 K, is studied by Z-contrast imaging and electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Results show that the copper species are well dispersed when the catalyst is reduced below 523 K. At 773 K, separated Cu(I) and Cu(0) species are found existing as ring-like and bulk-like particles. This appears to indicate that the copper has not been reduced to its metallic form due to the interaction between the copper oxide and the support. Large spherical particles having core-shell structures with Cu(I) in the shells and Cu(0) in the cores are generated when the catalyst is reduced at 1073 K. The formation of partially oxidized copper species upon reduction at 1073 K is attributed to the metallic copper interaction with the alumina support. This study also demonstrates that high-spatial resolution Z-contrast imaging and EELS performed simultaneously can provide unique information on the morphology and chemistry of metal species in supported metal catalysts.     

Neue Entwicklungen beim Hohlkatoden‐Gasflusssputtern. New Developments in Hollow Cathode Gas Flow Sputtering

The gas flow sputter technique was invented a few years ago particularly for the inexpensive fabrication of sophisticated ceramic layers. Meanwhile, it has matured and become increasingly powerful. Today it is on the verge of being applied in industrial fabrication processes. The present article gives an overview over the method, its characteristics and the numerous applications.     

用MAXScript脚本语言生成分形图形

介绍了分形生成技术的原理与性质、MAXScript脚本语言的特点及功能，详细叙述了用MAXScript脚本语言生成分形图形的设计思想和实现方法。针对分形几何的特点，以具有严格自相似性的分形树为例，通过解释源代码、描述程序运行过程和结果，以及对生成的图片用3DSMAX进行再处理，分析了在3DSMAX环境中用MAXScript脚本语言生成分形图形这一新方法的优点和不足。     

AUTOCONER-338型自动络筒机的接头工艺与切疵有效性分析

介绍了AUTOCONER-338型自动络筒机空气捻接器的接头要求与影响接头质量的因素,并且就不同品种的纱线选用不同接头工艺进行了简单分析;介绍了如何评价络筒切疵有效性与影响切疵率的因素.通过以上2方面的分析介绍,及时调整设计与工艺,提高了生产效率,改善了布面质量.     

俄气南供与天然气利用规划

介绍了俄气南供的供气方案，讨论了天然气的市场调查和价格的确定等问题。     

三元催化转化器中的现象分析与研究

在介绍和分析国内外研究现状的基础上，论述了三元催化转化器中的传递现象及化学反应动力学．探讨了三元催化转化器在暖机过程中有害物质的催化转化模型，并建议采用数学模型的方法对催化器在发动机所有工况下的工作过程进行模拟。     

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Modeling dynamic developable meshes by the Hamilton principle

In this paper, a new dynamic developable surface model is proposed. The proposed model represents developable surfaces using triangle meshes. A novel algorithm is proposed to introduce the Hamilton principle into these meshes such that the resulting developable model is dynamic, i.e., it can offer a time-dependent continuous path to deform the model. Applications with examples are presented; these show that the proposed technique can model buckled developable surfaces well, and can offer physically-realistic animations of deformed developable surfaces.     

基于HMS87C1408B的籽棉、菜籽和粮食水分综合测试仪

介绍了使用HMS87C1408B作为主控芯片的籽棉、菜籽和粮食水分综合测试仪的实现方法,重点说明了阻抗变换、软件驱动LCD和语音播报技术的实施.     

短脉冲激光与岩石相互作用机理初探

石油开采过程中，为增大原始岩体的渗流速度，一般采用水压致裂或射孔弹的方法来加以实现，但两种方法都存在一定缺陷。为探索一种新概念石油开采技术，即采用激光技术增大原始岩体的渗透率，对短脉冲激光辐照自然、饱水和饱油状态的花岗岩、大理岩和红砂岩的响应作了初步研究。得到了激光辐照下，岩石试样内烧蚀坑的三维形态以及烧蚀状态与脉冲数的初步关系。结果表明：脉冲激光可以在试样局部产生一定的裂纹；饱油试样的烧蚀情况较饱水和自然状态更严重。但对于产生的裂纹数量，尺寸以及方向等方面的控制尚需进一步的工作。