调味品行业现状与发展趋势分析(一)

文章综述介绍了调味品行业的总体状况、行业特点和发展趋势;从多角度对不同规模调味品企业发展的商业机遇和不同类别产品的市场拓展途径进行了探讨;提出了开发新型调味产品的几点建议.     

构皮滩发电厂技术供水系统减压阀改造应用浅析

减压阀的性能直接影响机组技术供水的品质及机组的安全稳定运行.针对以色列膜片差压式减压阀和北京时代中基ZJY46H-40C DN500型减压阀在构皮滩发电厂的应用情况,对两种类型减压阀的优缺点进行了对比分析,说明ZJY46H型减压阀在高水头电站中运用是可行的.     

麦尔兹窑煤气喷枪烧损原因分析与改进

对异常烧损的麦尔兹窑煤气喷枪,进行了金相、化学和扫描电镜检验等分析。分析结论:喷枪严重烧损主要是由于用材不当、超温运行、氧化腐蚀和硫化腐蚀所致。介绍实施的改进措施及其成效。     

基于轨迹模式空间解耦及模式能量序列的振荡分析(三)时变性分辨率从摆次细化到时间断面

系列文章的前两篇以振荡模式的空间解耦代替频域解耦,并通过互补群模式的摆次能量演化来反映复杂振荡行为的特征。由于其对时变性的分辨率较低,也不利于讨论多模式之间的交互作用,故文中提出在每个积分步末端所对应的时间断面处,按实际变量值重新冻结映象系统的非哈密顿因素,按虚构的哈密顿系统来估计该断面后的不平衡功率-转角的曲线。进而评估各互补群模式的振荡总能量(或其裕度)的时间序列,将轨迹振荡能量序列分析方法的时间分辨率从按模式摆次细化为按积分步长,更好地反映振荡的局部时变性。针对分别计及调速器或计及机械功率周期性扰动的两个算例,揭示了系统“反常”振荡行为的机理。     

Separation of Particles From Molten Aluminum With High Frequency Electromagnetic Field

The currentstudy is to investigate the separation of non-metallic inclusions from molten aluminum with 53-63kHz high frequency electromagnetic filed.In the experiments,aAl-SiC composite material-pure aluminum with a certain amount of dispersed SiC particles with 10-20μm diameter-was used.Both laboratory experiments and numerical simulation were performed.It was observed that SiC particles were pushed to the boundary layer of the aluminum close to the wall of the crucible,and the thickness of the particle layer was approximately 1.0-1.5 mm and the area fraction of the particle layer was 9-15%of the entire horizontal cross section area.With separation time going on,the accumulation layer became thinner,and the accumulation layer density became higher.The numerical simulation indicated that the magnetic flux density is larger at top and bottom than other locations and very small at the center of the crucible,and the EM force mainly acted on the outside 0.004 m layer of the melt due to the effect of the skin effect.There were recirculation eddies at the top and bottom and close to the corner where the EM force was the largest.The speed of the flow was 11-13 mm/s at the corner of the top and bottom and was as small as 1 mm/s at the center of the crucible.Both the numerical simulation and the experimental observation showed that the top free surface was not flat,approximately 1.0 mm high at the center of the top surface by numerical simulation and 4.0 mm by the experimental observation.More particles were entrapped at the lower part of the crucible.     

多功能胶粉在挡潮闸混凝土防碳化中的应用

文中简要介绍了多功能胶粉的性能,详细阐述了多功能胶粉在挡潮闸混凝土防碳化中的材料选择、施工工艺、施工方法以及注意事项.     

Conceptual models for fracturing in fault related folds

Fault related folds and fractures, which always improve reservoirs and trap capacity, especially in the oil and gas fields in western China, are of extreme importance for oil and gas exploration. Based on four assumptions and fault related fold theory, we propose four conceptual models for fracturing in fault related folds, i.e., a simple-step parallel fault bend anticline, a simple-step parallel fault propagation anticline, a multiple-bend fault-bend fold and a break-forward imbricate. Fracture conditions depend on structural evolution and specific site conditions. A case study of the Kulongshan Anticline in the Jiuquan Basin shows that our conceptual models match reality data very well.     

热致性液晶高分子材料某生产企业技术改造项目可行性分析

以投资、成本估算为基础,进行财务指标计算与盈利能力、不确定性和风险分析,确认实施上海普利特化工新材料有限公司热致性液晶高分子生产技术改造项目的必要性和经济上的可行性。     

化学发光法测定己内酰胺中的痕量铁

利用亚铁离子催化鲁米诺与溶解氧的化学发光反应,用分立取样式液相化学发光分析仪器进行痕量铁的测定,该法灵敏度高、选择性好、线性范围达三个数量级,而且操作简便、快速。     

蠕变时效成形工装设计研究

蠕变时效成形技术在航空航天器件中大型复杂整体壁板类零件的制造上具有独特优势,被认为是大型飞机重要的金属成形工艺之一。介绍了蠕变时效成形工装的技术要求,针对蠕变时效成形时的特点,结合成形工装的设计要求,设计制造了基于机械加载式成形工装和基于气压加载且自备加热系统的成形工装,两种工装既简单又实用,特别是后者具有较强的工程应用价值。经蠕变时效成形后的零件材料力学性能有所提高。