Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

蜗杆副的跑合工艺

叙述了蜗杆副跑合的目的、作用以及跑合过程的特点和跑合中应重视的几个问题。     

建设工程质量保证体系存在的问题及对策

结合建筑业市场管理体制的改革及其发展态势，就建筑工程质量保证体系存在的问题作了阐述，从加强勘察设计资格的管理，完善监理法规等方面，提出了健全和完善质保体系的措施。     

非对称型外差激光探针

本文描述用于检测微振动的非对称型外差激光探针系统及实验结果。实验数据表明,系统检测灵敏度为1×10~(-4)nm/(Hz)~1/2将本系统用于检测薄膜电路在交变电热下的微振动以及表面波聚焦换能器的辐射声场分布,得到满意的结果。     

螺纹钢牙筋长度不足的原因及解决办法

分析了影响螺纹钢牙筋长度的原因，根据铣床的工作原理，利用刀头夹持长度与凸轮工作轨面半径的几何关系，推导出计算各种不同规格螺纹钢牙筋的工艺参数，解决了螺纹钢牙筋长度不足之问题。     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

适合航天电子系统应用的DC－DC变换器

讨论了航天ＤＣ－ＤＣ混合集成电路的拓朴结构。通过对几种电路的性能比较，提出了适合航天应用的ＤＣ－ＤＣ变换器的最佳拓朴结构。论述了ＰＷＭ－ＬＩＮ变换器的控制方法，该方法对于确保二次稳压ＤＣ－ＤＣ变换器较高的效率具有重要意义，亦可大大提高混合集成电路的成品率。     

树脂悬浮光度法测定微量银

在ｐＨ６．９的缓冲溶液中，银与硫代米Ｃｈｉ酮（ＴＭＫ）形成的螯合物在树脂甘油相中悬浮富集，用光度法测定银在波长４６１ｎｍ处有最大吸收，银在０～６μｇ／１０ｍＬ范围内遵守比尔定律，可用于样品中微量银的测定。     

一种碳－碳复合材料长寿命防氧化涂层的失效机制

用液相法联合ＣＶＤ法和硅化法制备了一种碳－碳复合材料复合梯度涂层，在此基础上对这种涂层在氧化过程中的失效机制进行了研究．结果表明：氧化层与液相层界面反应生成的气相产物是涂层失效的根本原因界面上气泡的不均匀形核、长大和破裂导致涂层表面出现孔洞．孔洞处气泡优先形核、长大和破裂并发展成为缺陷而使涂层失效     

ANALYSIS ON ROOM TEMPERATURE TENSILE STRENGTH OF δ-Al_2O_3, FIBER / Al-12Si COMPOSITE

对δ－Ａｌ２Ｏ３纤维／Ａｌ－１２Ｓｉ复合材料室温拉伸强度的分析表明，在实验条件下该复合材料存在δ－Ａｌ２Ｏ３纤维的最小体积分数Ｖｍｉｎ和临界体积分数Ｖｃｒｉｔ，并求出其基体强度δｍ和室温强度σｃ－δ－Ａｌ２Ｏ３纤维体积分数Ｖｆ直线方程及纤维的临界长度ｌｃ和复合材料的剪切应力τＰ确定复合材料的ＲＯＭ预测曲线，应首先判断σｍ是否等于未增强合金的强度σｕｍ才能得出正确的结论。