Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Tetragonal structure, anionic vacancies and catalytic activity of SO4-ZrO2 catalysts for n-butane isomerization

An assessment of the influence of the crystal structure, surface hydroxylation state and previous oxidation/reduction pretreatments on the activity of sulfate-zirconia catalysts for isomerization of n-butane was performed using crystalline and amorphous zirconia supports. Different sulfation methods were used for the preparation of bulk and supported SO₄²⁻-ZrO₂ with monoclinic, tetragonal and tetragonal+monoclinic structures. Activity was important only for the samples that contained tetragonal crystals. The catalysts prepared from pure monoclinic zirconia showed negligible activity. SO₄²⁻-ZrO₂ catalysts prepared by sulfation of crystalline zirconia displayed sites with lower acidity and cracking activity than those sulfated in the amorphous state. Prereduction of the zirconia samples with H₂ was found to greatly increase the catalytic activity, and a maximum rate was found at a reduction temperature of 550–600 °C, coinciding with a TPR peak supposedly associated with the removal of lattice oxygen and the creation of lattice defects. A weaker dependence of catalytic activity on the density or type of surface OH groups on zirconia (before sulfation) was found in this work.

A model of active site generation was constructed in order to stress the dependence on the crystal structure and crystal defects. Current and previous results suggest that tetragonal structure in active SO₄²⁻-ZrO₂ is a consequence of the stabilization of anionic vacancies in zirconia. Anionic vacancies are in turn supposed to be related to the catalytic activity for n-butane isomerization through the stabilization of electrons from ionized intermediates.     

Carbohydrate type and amount alter intravascular processing and catabolism of plasma lipoproteins in guinea pigs

To test the effects of exchanging dietary complex and simple carbohydrate for fat calories on lipoprotein metabolism, guinea pigs were fed two different fat/carbohydrate ratios: 2.5∶58% (w/w) or 25∶29% (w/w) with either sucrose or starch as the carbohydrate source. Animals fed high-fat had higher plasma low-density lipoprotein (LDL) and hepatic cholesterol concentrations than animals fed low-fat diets (P<0.01). The cholesteryl ester content per particle was higher, and the number of triacylglycerol (TAG) molecules was lower in very low density lipoprotein (VLDL) and LDL from animals fed high-fat diets. Intake of high-fat/sucrose resulted in higher plasma LDL concentrations than intake of high-fat/starch, and animals fed low-fat/starch had the highest plasma TAG concentrations associated with VLDL particles containing more TAG molecules, as well as a TAG-enriched LDL. The activity of plasma lecithin cholesteryl:acyl transferase (LCAT) was highest in animals fed high-fat/sucrose, and heart lipoprotein lipase (LPL) activity was higher in animals fed high-fat diets. Hepatic apoprotein B/E (apo B/E) receptor number (B_max) was increased 21% with low-fat diets (P<0.01). These results suggest that the hypercholesterolemia induced by high-fat and by sucrose intake are associated with a higher plasma LCAT activity which results in a cholesteryl ester-enriched VLDL which, by the action of LPL, might be more readily converted to LDL through the delipidation cascade leading to downregulation of hepatic apo B/E receptors. The hypertriglyceridemia associated with low-fat intake may result from increased production of VLDL TAG, which would explain the increased TAG content and the higher TAG/CE ratio of VLDL from animals fed the low-fat/starch diet.     

Photoluminiscent Manganese Nanoparticles from Solid State Polyphosphazenes Organometallic Derivatives

Pyrolysis in air at 800°C of [{NP(OC₁₂H₁₀)}_0.6{NP(OC₆H₄PPh₂·(π-CH₃C₅H₄)−Mn(CO)₂)₂}_0.4] _n (1) in the solid state affords product 2 containing nanoclusters of Mn₂P₂O₇ with sizes ranging from 50 to 90 nm and averaging about 74 nm. The egg-shape of the unpyrolyzed organometallic polymer is retained but with increased particle size after pyrolysis. The pyrolytic material shows near-infrared photoluminescence attributed to the emission of tetrahedral Mn²⁺ embedded in a matrix of Mn₂P₂O₇. The solid-state pyrolysis of organometallic derivatives of polyphosphazenes may be a useful and general route to nano-structured Mn₂P₂O₇. An erratum to this article can be found at     

I3WSN: Industrial Intelligent Wireless Sensor Networks for indoor environments

Sensor Web Enablement (SWE) technologies have been successfully applied to a great variety of outdoor scenarios but, in practical terms, little effort has been applied for indoor environments, and even less in the field of industrial applications. This article presents an intelligent SWE application for an indoor and industrial scenario, with the aim of improving and increasing the levels of human safety. The base low-level architecture is built on top of wireless sensor networks (WSN) connected to a Sensor Observation Service (SOS). Higher layers in the architecture include services that make real time decisions based on the collected data. Both simulation and experimental results are presented. The paper shows the viability of our approach in terms of performance, scalability, modularity and safety.     

Sustainability in Web server systems

The exponential growth of Internet during the last decade leads us to make more efforts in the researching and developing of sustainable Web servers in order to decrease the global energy demand. In this paper, we cover, as a first step, a proper review of the literature related to the energy efficiency research in Web server systems to depict the state of the art to plan further contributions as more research in sustainable Web systems. We also propose and implement an energy metric that permits to establish a relation between the Quality of Service (QoS) obtained by the system and the power it consumes.     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.     

Beast methodology: An agile testing methodology for multi-agent systems based on behaviour driven development

This paper presents a testing methodology to apply Behaviour Driven Development (BDD) techniques while developing Multi-Agent Systems (MASs), termed BEhavioural Agent Simple Testing (BEAST) Methodology. This methodology is supported by the open source framework (BEAST Tool) which automatically generates test cases skeletons from BDD scenarios specifications. The developed framework allows the testing of MASs based on JADE or JADEX platforms. In addition, this framework offers a set of configurable Mock Agents with the aim of being able to execute tests while the MAS is under development. The BEAST Methodology presents transparent traceability from user requirements to test cases. Thus, the stakeholders can be aware of the project status. The methodology and the associated tool have been validated in the development of a MAS for fault diagnosis in FTTH (Fiber To The Home) networks. The results have been measured in quantifiable way obtaining a reduction of the tests implementation time.     

A genetic algorithm for job-shop scheduling with operators enhanced by weak Lamarckian evolution and search space narrowing

The job-shop scheduling problem with operators is a very interesting problem that generalizes the classic job-shop problem in such a way that an operation must be algorithm to solve this problem considering makespan minimization. The genetic algorithm uses permutations with repetition to encode chromosomes and a schedule generation scheme, termed OG&T, as decoding algorithm. This combination guaranties that at least one of the chromosomes represents and optimal schedule and, at the samhat machines and operators are idle while an operation is available to be processed. To improve the quality of the schedules for large instances, we use Lamarckian evolution and modify the OG&T algorithm to further reduce the idle time of the machines and operators, in this case at the risk of leaving all optimal schedules out of the search space. We conducted a large experimental study showing that these improvements allow the genetic algorithm to reach high quality solutions in very short time, and so it is quite competitive with the current state-of-the-art methods.